Extech LCR200 Specifications

Specifications subject to change without notice. Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
8/28/12 - R1
Measures Inductance, Capacitance, and Resistance
With secondary parameter Q (Quality), D (Dissipation), R (Resistance), θ (Phase), ESR (Equivalent Series Resistance)
Passive Component LCR Meter
Ordering Information:
Accessories
LCR203 ........SMD Tweezer for Model LCR200
LCR205 ........SMD Component Fixture For Model LCR200
CA900 ..........Large soft carrying case fits meter and accessories
Features:
Simultaneous 20,000/2,000 count backlit display of the primary
parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) R (resistance), θ(phase), or ESR (equivalent series resistance)
Auto Select measurement function with 1kHz
default test frequency
Five test frequencies
Set Hi/Lo limits using absolute values or percentage limits
Relative mode function
Parallel or Series equivalent circuit
Auto power off with disable
Low battery and overrange indicators
Built-in test fixture or use external test leads
Open and Short calibration removes unwanted
stray impedances from the measurement
Complete with test leads and 9V battery
Optional SMD Tweezer (LCR203), plug-in SMD Component
Fixture (LCR205), and pouch case (CA900)
LCR203 SMD Tweezer
Specifications Ranges Basic Accuracy
Inductance 20μH, 200μH, 2000.0μH, 20.0000mH, 200.00mH ±(0.5%rdg + 5 digits)
2000.0H, 20.000H, 200.00H, 2000.0H (DF<0.1)
Capacitance 20pF, 200pF, 2000pF, 20.000nF, 200.00nF, 2000.0nF ±(0.5%rdg + 5 digits)
20.000μF, 200.00μF, 2.0000mF, 20.00mF (DF<0.1)
Resistance 20.00Ω, 200.00Ω, 2.0000kΩ, 20.000kΩ, ±(0.5%rdg + 5 digits)
200.00kΩ, 2.0000MΩ, 20.000MΩ, 200.0MΩ DF (with C) 0.000 to 999 Q 0.000 to 999 Phase ±90° Test Frequency 100Hz/120Hz/1kHz/10kHz/100kHz Dimensions 7.6 x 3.5 x 1.6” (193 x 88 x 41mm) Weight 14.8oz (420g)
LCR205 SMD Component Fixture
Loading...