Specifications subject to change without notice.
Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
5/24/10 - R1
Measures Inductance, Capacitance, and Resistance
With secondary parameter Q (Quality), D (Dissipation), R (Resistance)
Passive Component LCR Meter
Ordering Information:
380193 ........Passive Component LCR Meter
153117 ........117VAC adaptor
153220 ........230VAC adaptor
Features:
• Simultaneous 20,000/10,000 count
backlit display of the primary parameter
(L, C or R) with the secondary parameter of
Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or
percentage limits
• Parallel or Series equivalent circuit
• Max/Min/Avg; Auto power off with disable
• Automatic blown fuse indication
• Built-in test fixture or use external test leads
• Open and Short Zero removes unwanted stray
impedances from the measurement
• Relative mode, zero, or supplied reference
• Complete with test leads, 9V battery, software,
cable, and protective holster
Built-in RS-232 with
Windows
®
95/98/NT/2000/XP
compatible software.
Specifications Ranges Basic Accuracy
Inductance 2000.0μH, 20.000mH, 200.00mH, 2000.0mH ±(0.7%rdg + Lx/10000 + 5 digit)
20.000H, 200.00H, 2000.0H, 10000H (DF<0.5)
Capacitance 2000.0pF, 20.000nF, 200.00nF, 2000.0nF ±(0.7%rdg + 5 digit)
20.000μF, 200.00μF, 2000.0μF, 10.000mF (DF<0.1)
Resistance 20.000Ω, 200.00Ω, 2.0000kΩ, 20.000kΩ, ±(0.5%rdg + 8 digit)
200.00kΩ, 2.0000MΩ, 10.000MΩ
DF (with C) 0 to 0.9999 ±(0.7%rdg + 100/Cx + 5 digit)
Q 0 to 9999 ±(1.2%rdg + 100/Lx + 5 digit)
Test Frequency 120Hz and 1kHz
Dimensions 7.56 x 3.58 x 2.1” (19.2 x 9.1 x 5.25cm)
Weight 12.87oz (365g)