Exsys EX-8221 Quick Installation Manual

FAX MODEM

Quick Installation Guide

-1-

Contents

Introduction....................................................................................................................3

Features..................................................................................................................3

Minimum System Requirements............................................................................3

Package Checklist..................................................................................................3

Installation......................................................................................................................4

Hardware Installation.............................................................................................4

Line Connection.....................................................................................................4

Software Installation..............................................................................................4

Modem Dialing Location...............................................................................................5

For WIN 2000/XP..................................................................................................5

For WIN VISTA.....................................................................................................5

For WIN 7..............................................................................................................5

Manual Dial-up Connection Settings.............................................................................6

Manual Dial-up Connection Settings (For 2000/XP) ............................................6

Manual Dial-up Connection Settings (For Vista) ................................................10

Manual Dial-up Connection Settings (For Win7)................................................15

-2-

Introduction

Features

This modem card supports following communication standards.

Modulations and protocols

z – ITU-T V.92 (V.92 model)
z – V.90 (V.92 model)
z – V.34 (V.92 and V.34 models)
z – V.32bis, V.32, V.22bis, V.22, V.23, V.21
z – V.23 reverse, V.23 half-duplex
z – Bell 212A/Bell 103
z – V.29 FastPOS
z – V.22bis fast connect

Data compression and error correction

z -V.44 data compression (V.92 model)
z -V.42bis and MNP 5 data compression
z -V.42 LAPM and MNP 2-4 error correction

Fax modem send and receive rates up to 14.4kbps

z V.17, V.29, V.27 ter, and V.21 channel 2
z EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2

Minimum System Requirements

z CPU Pentium MMX 233 up
z Windows platform
z Sound Card

Package Checklist

z One Fax Modem
z One RJ-11 cable
z One Driver CD

-3-

Installation

Hardware Installation

1. Power off your PC and remove the casing of PC carefully.

2. Press the modem card firmly into the free PCI slot and secure it with screws to

your PC.

3. Reinstall the casing of PC.

4. Plug the telephone line into the“Line”jack.

Line Connection

Figure I: shows the back panel of the internal modem card.

Software Installation

1. Once you have completed the hardware installation, power on your computer and

put the driver CD into the proper CD-ROM. Found New Hardware Wizard
window pops up, click Cancel.

-4-

2. Click your DVD ROM to see the folders. There are 6 folders (Win7 32/ Win7

64/Vista32/Vista 64/Win2KXP/WinXP64) in the driver disk. Choose the correct
folder according to your windows. ( e.g.D(CD-ROM):\Driver\Win2KXP (or
other OS version)) After you enter the correct folder, double-click setup.exe and
follow the instruction to complete the driver installation.

Modem Dialing Location

If you want to change your dialing location, please follow the instruction as below:

For WIN 2000/XP

Click Control Panel

Æ Phone And Modem Options
Æ Under Dialing Rules click Edit, and then you can change your location.

For WIN VISTA

Click Control Panel

Æ Phone And Modem Options
Æ Under Dialing Rules click Edit, and then you can change your location.

For WIN 7

Click Control Panel

Æ Phone And Modem Options
Æ Under Dialing Rules click Edit, and then you can change your location.

-5-

Manual Dial-up Connection Settings

Manual Dial-up Connection Settings (For 2000/XP)

1. On Control Panel/Network Connections, click Create a new connection.

2. Click Next.

-6-