Seite 1
© 2019 by EXSYS. Alle hier aufgeführten Namen und Zeichen sind Eigentum des jeweiligen Herstellers.
Druckfehler, Änderungen und Irrtümer bleiben vorbehalten
www.exsys.de / exsys.ch / exsys.it
EX-45034
PCIe I/O RS-232/422/485
4S Seriell RS-232/422/485 PCIe Karte
POS einstellbar (FTDI Chip-Set)
4S Serial RS-232/422/485 PCIe card
POS configurable (FTDI Chip-Set)
Anwendung / Application
Bild / Picture
Description Beschreibung
Features Merkmale
Geprüft / Approved System / OS Verpackung / Packaging
3
• Schnittstelle: RS-232 V.24 / RS-422 / RS-485 • Interface: RS-232 V.24 / RS-422 / RS-485
• ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's • ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
• FIFO Buffer 16C550 mit 16Byte • FIFO Buffer 16C550 with 16Byte
• I/O Adressen und Interrupt werden vom Betriebssystem vergeben • I/O addresses and interrupt are set from the operating system
• Daten Bits: 7 und 8 / Stop Bits: 1, 1.5, 2 • Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
• Parity: none, even, odd, space und mark • Parity: none, even, odd, space and mark
• Unterstützt ATTA
TM
Auto Transmitter • Support ATTATM Auto Transmitter
• Terminierung RS-422/485 - 120 Ohm kann ein– und ausgeschaltet werden • Termination RS-422/485 - 120 Ohm can be enable– and disable
• Signale: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 Draht (Data+/-, Data+/-) Halfduplex
• Signal: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 wire (Data+/-, Data+/-) Halfduplex
Die EX-45034 PCIe I/O Karte stellt vier serielle RS-232, 422 und 485 High Performance UART 16C550 Ausgänge zur Verfügung. Sie ist entwickelt worden um
vier weitere Serielle Ports für PC, kleine W orkstation oder Server über den PCIe
Bus zu erweitern. +5V und +12V sind auf Pin 9 der seriellen Steckers als POS
System (Power over System) konfigurierbar. Die Karte ist voll Plug-and-Play
kompatibel. Sie unterstützt die Merkmale ATTATM Auto RS-485 Transmitter. Für
jeden Port kann die Übertragungsart RS-232, 422 oder 485 individuell eingestellt
werden.
The EX-45034 PCIe I/O card provides four serial RS-232, 422 and 485 high performance UART 16C550 outputs. It is designed to expand four additional serial ports
for PC, small workstation or server via PCIe bus. +5V and +12V are configurable
on pin 9 of the serial connectors as POS system (Power over System). The card is
fully plug-and-play compatible. It supports the ATTATM Auto RS-485 transmitter
features. Each port can be individually set to RS-232, 422 or 485.
Barcode
Computer System
Workstation
EX-45034
Server
Waage
Balance
Scanner
Modem
Cardreader
Terminal