Seite 1
© 2019 by EXSYS. Alle hier aufgeführten Namen und Zeichen sind Eigentum des jeweiligen Herstellers.
Druckfehler, Änderungen und Irrtümer bleiben vorbehalten
www.exsys.de / exsys.ch / exsys.it
EX-42034IS
PCI I/O RS-232/422/485
2S Seriell RS-232/422/485 PCI Karte
Surge Protection & Optical Isolation
(FTDI Chip-Set)
2S Serial RS-232/422/485 PCI card
Surge Protection & Optical Isolation
(FTDI Chip-Set)
Anwendung / Application
Bild / Picture
Description Beschreibung
Features Merkmale
Geprüft / Approved System / OS Verpackung / Packaging
3
• Schnittstelle: RS-232 V.24 / RS-422 / RS-485 • Interface: RS-232 V.24 / RS-422 / RS-485
• 15KV ESD Überspannung-Schutz und 2.5KV Optische Isolation • 15KV ESD Surge Protection and 2.5KV Optical Isolation
• ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's • ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
• FIFO Buffer 16C550 mit 16Byte • FIFO Buffer 16C550 with 16Byte
• I/O Adressen und Interrupt werden vom Betriebssystem vergeben • I/O addresses and interrupt are set from the operating system
• Daten Bits: 7 und 8 / Stop Bits: 1, 1.5, 2 • Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
• Parity: none, even, odd, space und mark • Parity: none, even, odd, space and mark
• Unterstützt ATTA
TM
Auto Transmitter • Support ATTATM Auto Transmitter
• Terminierung RS-422/485 - 120 Ohm kann ein– und ausgeschaltet werden • Termination RS-422/485 - 120 Ohm can be enable– and disable
• Signale: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 Draht (Data+/-, Data+/-) Halfduplex
• Signal: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 wire (Data+/-, Data+/-) Halfduplex
Die EX-42034IS PCI I/O Karte stellt vier serielle RS-232, 422 und 485 High
Performance UART 16C550 Ausgänge mit 15KV ESD Überspannungs-Schutz
und 2.5KV Optischer Isolation zur Verfügung. Sie ist entwickelt worden um vier
weitere Serielle Ports für PC, kleine Workstation oder Server über den PCI– oder
PCI-X Bus zu erweitern. Die Karte ist voll Plug-and-Play kompatibel. Sie unterstützt die Merkmale ATTATM Auto RS-485 Transmitter. Für jeden Port kann die
Übertragungsart RS-232, 422 oder 485 individuell eingestellt werden. POS
(Power over System) ist nicht einstellbar.
The EX-42034IS PCI I/O card provides four serial RS-232, 422 and 485 high performance UART 16C550 outputs with 15KV ESD surge protection and 2.5KV optical isolation. It is designed to extend four additional serial ports for PC, small workstation or server over the PCI or PCI-X bus. The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 transmitter features. For each port the
transmission mode RS-232, 422 or 485 can be set individually. POS (Power over
System) is not adjustable.
Barcode
Computer System
Workstation
EX-42034IS
Server
Waage
Balance
Scanner
Modem
Cardreader
Terminal