Seite 1
© 2020 by EXSYS. Alle hier aufgeführten Namen und Zeichen sind Eigentum des jeweiligen Herstellers.
Druckfehler, Änderungen und Irrtümer bleiben vorbehalten
www.exsys.de / exsys.ch / exsys.it
EX-1344HMV
USB 2.0 - RS-232/422/485
USB 2.0 zu 4S Serielle RS-232422/485 Ports
Metall-Gehäuse (FTDI Chip-Set)
USB 2.0 to 4S Serial RS-232/422/485 ports
Metal case (FTDI chipset)
Anwendung / Application
Bild / Picture
Description Beschreibung
Features Merkmale
Geprüft / Approved System / OS Verpackung / Packaging
3
Die EX-1344HMV USB 2.0 zu Seriell RS232/422/485 in einem Metallgehäuse,
stellt vier Serielle RS232, 422, oder 485 High Performance UART 16C550 Combo
-Ausgänge zur Verfügung. Sie ist entwickelt worden um vier weitere Serielle
Ausgänge in einem robustem Metallgehäuse für Desktop Computer, Notebook
oder 19-Zoll Rack über den USB 2.0 Bus zu erweitern. Durch die einfache Installation muss der Rechner nicht geöffnet werden. Das mitgelieferte Kabel EXK1542V A-Stecker auf B-Stecker kann ohne Schraubenzieher an der EX1344HMV mit Rändelschrauben befestigt werden. Das Kabel kann sich somit
nicht mehr von alleine lösen. Die EX-1344HMV kann mit dem Din-Rail-Kit auf eine
Trägerschiene in einem 19-Zoll Rack installiert werden. Die EX-1344HMV hat
LED Anzeigen für Betriebsfunktionen und Datenübertragungen.
The EX-1344HMV USB 2.0 to serial RS232/422/485 in a metal case, provides four
high performance 16C550-type UART compatible RS232, 422 or 485 serial ports. It
is designed for PC, Notebooks or 19-inch rack to provide instant COM port expansion in a robust metal case through the USB 2.0 bus. With the easy installation you
don’t need to open the computer system. With the included USB cable EX-K1542V
A-male to B-male you can x the connector with screw. The cable can’t be disconnect any more by him self. You can install the EX-1348HMV with the DIN-Rail-Kit in
a 19-inch rack. The EX-1344HMV has LED displays for operation functions and data
communication .
Barcode
Computer System
Notebook
EX-1344HMV
Server
Waage
Balance
Scanner
Modem
Cardreader
Terminal
Geprüft / Approved System / OS Verpackung / Packaging
• Schnittstelle: RS-232 V.24 / RS-422 / RS-485 • Interface: RS-232 V.24 / RS-422 / RS-485
• ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's • ±15kV IEC1000-4-2 ESD Schutz für RS232 I/O's
• FIFO Buffer 16C550 mit 16Byte • FIFO Buffer 16C550 with 16Byte
• I/O Adressen und Interrupt werden vom Betriebssystem vergeben • I/O addresses and interrupt are set from the operating system
• Daten Bits: 7 und 8 / Stop Bits: 1, 1.5, 2 • Data bits: 7 and 8 / Stop bits: 1, 1.5, 2
• Parity: none, even, odd, space und mark • Parity: none, even, odd, space and mark
• Unterstützt ATTA
TM
Auto Transmitter • Support ATTATM Auto Transmitter
• Terminierung RS-422/485 - 120 Ohm kann ein– und ausgeschaltet werden • Termination RS-422/485 - 120 Ohm can be enable– and disable
• Signale: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 Draht (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 Draht (Data+/-, Data+/-) Halfduplex
• Signal: RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 4 wire (TxD+/-, RxD+/-) Fullduplex
RS-485 - 2 wire (Data+/-, Data+/-) Halfduplex
• Stromversorgung vom USB Bus (Bus Power) • Power from the USB Bus (Bus Power)
• LED Anzeige für RX und TX • LED Display for RX and TX