Expobar 600 User guide
User manual
EXPOBAR 600
ODG
Your retail dealer
...............................................................................
...............................................................................
U / EN
Rev. 100223
1. Table of contents. Expobar 600
TABLE of CONTENTS
1 Table of content s 2.
2 General 3.
3 Preface……………………………………………………………………………………4.
4 T echnical Specifications …….………………………………………………………… 4.
5 General Description ………………………………………………………………… 5.
6 Unpacking and installation …………………………………………………………… 6.
7 Operation…………………………………………………………………………………7 - 9.
8 Safety devices……………………………………………………………………………10.
9 Safety instructions……………………………………………………………………… 11.
10 Maintenance and service…………………………………….……….……………… 12.
11 Cleaning with GRINDZ™ cleansing agent………………………………………….… 13
1 1 Cleaning…………………….……………………………………………………….… 14- 15.
2.
2. General. Expobar 600
WARNINGS
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety .
2. Children should be supervised to ensure that they do not play with the appliance.
3. Care is needed when handling cutting blades during cleaning.
4. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Warranty Information
The manufacturer provides warranty in accordance with the legislation of the customer’s own country
of residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which the
appliance is sold to the end user.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service centre. When making a
claim under the warranty , the original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
Normal wear and tear Incorrect use, e.g. overloading of the appliance, use of non approved
accessories Use of force, damage caused by external influences Damage caused by nonobservance
of the user manual, e.g. connection to a nun suitable mains supply or non compliance with the
installation instructions Partially or completely dismantled appliances.
3.
3. Preface. Expobar 600
Congratulations for purchasing the HC-600 On Demand Grinder (ODG). The HC-600 is a
commercial appliance to be used in coffee shops, espresso bars, hotels, restaurants, etc.
HC-600 will grind whole been coffee into variable, user selectable (from super fine to course) coffee
powder and will dose a pre defined dose to your espresso machine filter holder.
Read this manual from cover to cover before using the appliance as it contains important instructions
for the safety , operation, and maintenance of the appliance. Keep the manual in a safe place for future
use and reference.
The manufacturer reserves the right to modify the appliance and the manual accordingly .
4. Technical specifications. Expobar 600
Dimensions:
Height: 560mm
Width: 210mm
Length: 330mm
Weight: 15Kg
Burrs diameter: 64mm
Hopper capacity: 1200gr. Cof fee beans
Electrical Specifications: 230V/60Hz
Power: 350w
Grinding capacities: 6-9Kg/hour
4.
5. General description. Expobar 600
Bean hopper lid
Bean hopper
Bean hopper
door
Hopper Safety
screw
Powder outlet
lid
Powder outlet
Espresso filter
handle support
Program dial
Grinding dial
Grinder body
LCD display and
counter mode
selector
Residue tray
Working mode selector
5.
6. Unpacking and installation. Expobar 600
Warning: All appliances’ technical handling operations such as installation, maintenance,
or service should be performed by certified personnel or by your local dealer.
• After opening the box, make sure that the appliance is intact and that there is no visible damage.
If there is any doubt, DONOT use the appliance and call your local dealer for further assistance.
• Unpack the carton box carefully . For your convenience we suggest storing all packaging materials
where they can be used in the future, whenever the appliance’s transportation is necessary .
• Place the grinder on a stable flat counter in a dry area away from water or water splashes.
• Position the coffee residue tray underneath the body in front of the appliance.
• Install the beans hopper firmly on top of the body inside the top blade holder .
• Fasten the hopper to the appliance body by means of the supplied screw. (fig. A)
Make sure that the screw is inserted completely through both holes in the hopper and in the top
blade holder.
fig. A
NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLY SECURED IN
ITS POSITION.
• Before plugging in the electrical cord, make sure:
- The appliance voltage and frequency rating (according to the back side label) is the same
as the supply mains.
- The wall socket is fitted with an efficient ground contact. DONOT plug the appliance into the
supply mains if the ground system was not positively checked to be in compliance with
current safety rules.
IT IS COMPULSORY TO GROUND THE APPLIANCE. The manufacturer can not be held
responsible in the event that this regulation is not complied with.
- The power consumption of the appliance (according to the backside label) is consistent
with the relevant wall socket capacity.
- The wall socket is protected against short outs and power surges.
- Do not use extension cables, plug adapters for multiple sockets, or make shift connections.
• Plug in the appliance.
• Upon first time operation, and before placing beans into the hopper, VISUALL Y check that the
blade rotation direction is clockwise by switching the appliance ON for a short while.
• Should the rotation direction be wrong, do not use the appliance and contact your local dealer
for further instructions.
6.
Loading...