EXP Computer PowerSync-HV User Manual
PowerSync HV Installation Guide
Thank you for purchasing the PowerSync HV. The PowerSync HV enables you to simultaneously
synchronize and Charge your Handspring Visor with your Palm Desktop software via the USB port.
Sync & Charge - Visor Prism
Sync Only - Visor Platinum, Visor Deluxe and Visor
System Requirements:
· PC with Windows 98, ME, or Windows 2000
· Apple with Mac OS 8.6 or above
· One available USB Port
Installation Procedures:
1) Make sure to install the Palm Desktop software before plugging the cable in to your desktop or laptop.
2) Connect the cable to your handheld and to the USB port of your laptop or desktop.
3) Refer to your Visor Hotsync setup instructions to choose the USB connection setting.
4) You now are charging your Handspring Visor (Prism)
5) Just hit the HotSync button in the middle of the Power Sync cable and you are synchronizing!
For any further questions regarding the installation of this product, please visit our web site at
www.expnet.com, or contact EXP Technical Support at 516-942-5610 or email us at
support@expcomputer.com.
To Visor
PWR
SYNC
TXD
RXD
To USB Port
Power LED
HotSync Button
Loading...