Ex-Or QuickSet Remote Controller Installation Instructions

Technical Data
Making light work
QuickSet Remote Controller
For use with infrared-enabled
Ex-Or sensors
Range: 15m approx
Battery: 3V DC CR2032 Lithium Button Cell
Expected Battery life: 3 years
Storage Temperature: -25 C to 70 C
Operating Temperature: 0 C to 40 C
IP Rating: 4X
Approval: CE
Dimensions: 100mm (h) x 50mm (w) x 7mm (d)
Honeywell Ex-Or Albery House, Springfield Road, Horsham, West Sussex RH12 2PQ Tel: + 44 (0)1942 719229 Fax: + 44 (0)1942 508753 Email: technicalsales.ex-or@honeywell.com
o o
o o
Operating Instructions
Note: This product is compatible with LightSpot HD sensors
50094272-001 RevB
Operating Instructions Functions
General use
20
10
by Honeywell
20
10
by Honeywell
Start up Battery replacement
The used battery must be disposed of in accordance with the applicable regulations.
Walk Test Sets time delay to 10 seconds to check
detector operation
On/Off Turn lights on/off
Brightness Dim lighting
Increase lighting
Set Set light level thresholds for photocell
Time Delay 5 minute time delay
10 minute time delay
20 minute time delay
40 minute time delay
Absence Absence mode
Presence Presence mode
1
Photocell Photocell on
Photocell off
Restore Factory defaults. Hold button until sensor
2
Lamp Burn-in Start
Stop
Resume
acknowledges with red, green, blue sequence (approx. 5 seconds)
Loading...