EXONIC EXM 352R User Manual

In Car Audio,

[ék-san -ik] means

Sonic Excellence by

Mobile Entertainment

INSTRUCTION MANUAL

EXONIC Mobile Entertainment Buena Park, CA. 90621 U.S.A . www.exonicmobile.com

EXM 352R

3.5" Digital TFT LCD Rearview Monitor

EXM 352R

Universal Rearview Monitor

Installation

Remote control

Switching Cable

Red(+)Switched lgnition

Black(-)Ground

Blue(+)Reverse Wire

Yellow(RCA) Video Input Wire

White(RCA)Camera Input Wire

Mounting

1. Firmly p ress suction cup o n to clean area on glass.

2. Depress lever to lock into place.

Sucker bracket

Gift box

Operation

Color LCD Screen

Remote receiving window

Press “M” to di splay options as following：

PICTU RE SYS TEM

1.PICTURE

right, Contrast, color and TINT di splay on the scree n as illustrated

B below. Press Volume+/- to select bright / Contrast / color / TINT, press “M”to confir m,press volume +/- to adjust the analog quantity of bright from 0 to 100 , then press “M”to quit .

CAM（NOR） PICTURE BRIGHT CONTRAST COLOR TINT

50 50 50 50

CAM1(N OR) SYSTEM LANGUA GE ENLISH COLOR SY S AU TO CAM1 NOR MAL CAM2 TRG DELAY TI ME 0

Volume+

Volume-

AV output

DC Input

Power on/off

CAM1/CAM2 shift

Wiring

1. Route wiring away from all moving vehicle parts.

2. Connect the BLACK wire to an area of metal on the vehicles frame for ground.

3. Connect the RED wire to a switched ignition source (cigarette lighter jack or fus e block).

4. Connect BLUE reverse trigger wire to the switched side of the reverse light, or a p ositive revers e trigger wire.

5. Connecting the BLUE trigger wire is optical, by not connecting the BLUE trigger w ire, the monitor w ill not trun on automatically when shifted to reverse.

6. Connect the Rearview Camera Input wire WHITE RCA plug to Rearvie w Camera.

7. Connect the Video Input wire YE LLOW RCA plug to Video Source.

2.SYSTEM

Press Volume+/- to select Language，press“M”to confirm, press volume+/- to change the language, then press “M” to quit. Press Volume+/- to select COLOR SYS，press“M”to confirm，press volume+/- to choose the corresponding color system, then press “M” to quit.If t he color system is n ot suit,the imag e will be bad color or no color Suggest to choose AUTO. Press Volume+/- to select CAM1，press“M”to confirm，press volume+/- to change CAM1 image normal or mirror, then press “M” to quit. Press Volume+/- to select CAM2，press“M”to confirm，press volume+/- to change CAM2 image normal or mirror, then press “M” to quit. Press Volume+/- to select TRG DELAY TIME ，press“M”to confirm, then Press Volume+/- to set up the delay time(0-30S) of the reverse image.press “M” to quit.