MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 22011-12-19 오전 11:35:57
Page 3
outlet and refer servicing to qualified service personnel under the following conditions:
23) The socket-outlet shall be installed near the equipment and shall be easily accessible.
Before use
Important Safety Instructions
Always be careful when using your product. To reduce the risk of fire, electrical shock and other injuries, keep these safety
precautions in mind when installing, using and maintaining your product.
1) Read these instructions
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this product near water.
6) Cleaning – Unplug and separate any power source and use a dry
cloth only.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install or use near any heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that
produce heat.
9) Do not tamper with the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the product.
11) Only use the attachments / accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this product during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the product has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the product, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15) Lightning – For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
16) Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electrical
shock.
17) Object and Liquid Entry – Never push objects of any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
03
18) Servicing – Do not attempt to service this product yourself as openings
or disassembling the cabinet may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19) Damage Requiring Service – Turn the Product off, unplug this product from the wall
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the product,
C. If the product has been exposed to rain, water or other liquid,
D. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage an will often
required extensive work by a qualified technician to restore the product to its
normal operation,
E. If the product has been dropped or damaged in any way, and
F. When the product exhibits a distinct change in performance – this indicates a
need for service.
20) Replacement Parts – When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards and will void warranty.
21) Safety Check – Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
22) Heat – The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
24) When used outside of the U.S., it may be used with HAR cord with fittings of an
approved agency is employed.
25) Do not use this equipment in a confined space such as a book case or similar unit.
Allow adequate air circulation around this product.
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 32011-12-19 오전 11:35:57
Page 4
Before use
Precautions
1) Do not use this product in temperatures higher than 40°C (104°F)
and lower than 0°C (32°F).
2) Do not store this product in temperature higher than 60°C (140°F)
and lower than -10°C (14°F).
3) Keep the unit away from direct sunlight.
4) Do not expose the unit to any kind of liquid and rainwater.
5) Keep the unit away from an open flame such as fire or a fire stove.
6) Do not place the unit into a refrigerator, a washing machine,
dishwasher, or a microwave oven.
7) Do not place the powered-on product inside of the carrying bag or
plastic bag.
8) Do not drop this unit.
9) Do not place anything heavy, sharp, wet, or hot on the unit.
10) When you carry this unit, use caution to keep it from being crushed
or damaged.
11) Do not cover or block the unit with bedclothes or blanket when
power cord is plugged into the AC outlet, or the unit is powered on.
12) Check if the voltage of the power jack in your car is between
12V - 24V before using car charger.
13) When using car charger, start car first and connect car charger
afterwards.
14) To protect your hearings, set the volume to the lowest before use
earphones. Do not listen at extremely high volume levels as
extended high volume listening can cause hearing loss.
15) Parents shall be concerned about the usage of this product
by underage children not to be exposed to the broadcastings
with inappropriate rate.
16) Do not attempt to disassemble this product.
04
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 42011-12-19 오전 11:35:57
Page 5
Before use
Features
MobileDTV&ATSCDigitalTVTuner
1. DC Input
2. External IR Input
3. USB Update
4. VIDEO
5. AUDIO Left
6. AUDIO Right
7. ANTENNA Input
POWER IN
DC12~24V
IR IN
VIDEOAUDIOANT. IN
UPGRADE
LR
05
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 52011-12-19 오전 11:35:57
Page 6
Before use
Checking Part
MobileDTV&ATSCDigitalTVTuner
POWER IN
IR IN
UPGRADE
VIDEO AUDIO ANT. IN
DC12~24V
L R
1. Car Tuner
2. Owner’s Manual3. Power Cable4. Audio/Video Cable5. External Remote Control Receiver
6. Remote Control / Battery7. Ext. Cable Antenna
06
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 62011-12-19 오전 11:35:57
Page 7
Before use
Remote Control
07
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 72011-12-19 오전 11:35:58
Page 8
Before use
Installing Battery for Remote Control
1. Press side and pull the Cover.
2. Place new battery on the slot.
3. Push the cover to slide it into the unit.
08
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 82011-12-19 오전 11:35:58
Page 9
AV Cable
Setup
Connecting
TV, Monitor
External Remote Control ReceiverAntenna
Video Audio
L R
Power Cable
Video L R
RED
BLACK
VideoLR
09
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 92011-12-19 오전 11:35:58
Page 10
Menu Operation
TV
Auto Search
Use “ (MENU Button) -> TV -> Auto Search” and select
scan mode (Rescan / Update).
Searched channels will be listed in the box.
To stop, press “ ” button.
* RF Channel may differ from virtual channel number.
e.g. For RF Channel 19, virtual channel can be 32-1 or 32-2.
* Select “Rescan” to delete the channel list and do a full scan. Select “Update” to do an additional scan
except existing channel list.
* Depending on the local services for the ATSC M/H stations,
switching between channels may take 5 seconds to 10 seconds delay.
10
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 102011-12-19 오전 11:35:59
Page 11
Menu Operation
Quick SearchChannel Hop
“Quick Search” is for user’s easy RF Ch. tuning.
Move to RF number you want using direction buttons and
press “ ” button to watch the desired RF channel. Channel
showing is highlighted in yellow.
“Channel Hop” is for user’s easy move to desired channel.
Scanned channels are saved at “Channel Edit” and added channels
are listed at “Channel Hop”.
Move up and/or down using up ( ) and down ( ) buttons.
Move next and/or before page using left ( ) and right ( ) buttons.
Press “ ” button to watch the selected desired channel.
11
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 112011-12-19 오전 11:35:59
Page 12
Menu Operation
Channel Edit
Use “ -> TV -> Channel Edit” menu to enter channel edit menu.
Use up ( ) and down ( ) button to move to previous/next
channel.
Use Left ( ) and Right ( ) to move to the next channel list.
Press button to activate or deactivate the channel.
User will move within added channels only when change channel
using direction keys.
12
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 122011-12-19 오전 11:35:59
Page 13
Menu Operation
Aspect Ratio
Use “ -> TV -> Aspect Ratio” menu to set up the display
aspect ratio.
- Users can select among Auto, 16:9, 4:3, Zoom1, and Zoom2.
Closed Caption
Use “ -> TV -> Closed Caption” menu to set up the
Closed Caption service.
- Users can select CC service using up and down button.
- To disable caption display, select “OFF”.
13
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 132011-12-19 오전 11:35:59
Page 14
Menu Operation
Preferred Audio Language
Use “ -> TV -> Preferred Audio” menu to set up the preferred
audio language.
Audio
Use “ -> TV -> Audio” menu to set up the audio.
14
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 142011-12-19 오전 11:35:59
Page 15
Menu Operation
Sound (DTV Only)
Use “ -> TV -> Sound” to change the stereo sound to mono
(Right or Left) sound.
When 2 different sounds and/or languages come from the TV,
try mono sound and select Right or Left.
* Digital mode and Mobile mode both have the key option and each can have own setting.
* The default key option setting for both Digital mode and Mobile mode is “Channel Hop” menu.
HOT Key
Use “ -> TV -> HOT Key ” menu and select the most frequently
used function.
15
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 152011-12-19 오전 11:36:00
Page 16
Menu Operation
Info
Viewing Current Channel Information
- To view the info banner, press while viewing program. - To hide the info banner, press again.The info banner will vanish after 5 minutes.
Channel Information for Digital Mode
Program title
Mode Information (DTV or MDTV)
Channel number: The major channel number and the sub/minor
channel number.
Broadcaster: The name of station
Program start and end time
shows current broadcast resolution.
is highlighted when Closed Caption service is available.
is highlighted when multilingual audio tracks are available.
is highlighted when multi channel Dolby Digital
surround sound source.
Signal strength
Current time and date
16
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 162011-12-19 오전 11:36:00
Page 17
Menu Operation
Using EPG (Electronic Program Guide)
EPG gives you an overview of the available program. EPG shows the program list, starting and ending times, and detailed information.
(Availability and amount of program details depend upon broadcast’s feed.) EPG menu is accessible only for Digital mode selection.
Select “ -> Info -> EPG” menu to view EPG.
Press Up ( ) and Down ( ) button (Ch+/Ch- buttons) to navigate through EPG.
Press “ ” button to view detailed program information.
* To receive the EPG information from a broadcaster, you must tune the specific channel to receive the
broadcaster’s PSIP (Program and System Information Protocol) for EPG update (If possible).
17
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 172011-12-19 오전 11:36:00
Page 18
Menu Operation
Signal Meter
Use “ -> Info -> Signal Meter” menu to display the
signal meter.
S/W Version
Use “ -> Info -> S/W Version” menu to display the
software version.
18
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 182011-12-19 오전 11:36:00
Page 19
Menu Operation
Setting
Antenna Power
Use “ -> Settings -> Antenna Power” menu to setup the
antenna power.
19
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 192011-12-19 오전 11:36:00
Page 20
Menu Operation
Menu LanguageMenu Opacity
Use “ -> Settings -> Menú Idioma” menu to change
menu language.
Use “ -> Settings -> Menu Opacity” menu to change
menu opacity.
20
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 202011-12-19 오전 11:36:00
Page 21
Menu Operation
Time Zone Factory Reset
Use “ -> Settings -> Time Zone” menu to change time zone.Use “ -> Settings -> Factory Reset” menu to initialize the unit as
factory default state.
* Automatic time setting based on the time zone
will work properly only when valid information
is received from the broadcaster.
* For automatic time setting to work correctly,
time zone must be setup correctly.
Factory reset will delete all the settings users
saved and initialize to the default setting.
21
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 212011-12-19 오전 11:36:01
Page 22
Specifications
1. H/W Specifications
Digital TV
Operating Temp.
0°C (32°F) ~ 40°C (104°F)
2. S/W Specifications
MPEG2
22
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 222011-12-19 오전 11:36:01
Page 23
Trouble Shooting Guide
If you are having difficulty with your Tuner, follow the troubleshooting guides below.
If problems persist, call your local service technician for further assistance.
SymptomsPossible Solutions
The Tuner won’t turn on
Intermittent signal or
no signal.
Poor or no sound.
Picture is distorted.
- Check to make sure the power cable is plugged into the Tuner.
- Check you pressed the power button on remote control.
- Make sure your antenna is connected without damage.
- The antenna signal strength may be low. Check the signal meter on the receiver to see if the
signal is strong enough. If not, adjust your antenna system.
- If you are using a powered antenna, make sure the power boost is on.
- Move your Tuner to window if you are inside.
- Move your Tuner away from other appliances that cause interference.
- Check if volume is set high enough.
- Try another audio language.
- Check speakers if it works properly in case you are using it.
- Make sure the correct display mode is selected.
- Check if Aspect Ratio is set properly.
23
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 232011-12-19 오전 11:36:01
Page 24
License Notice
Manufactured under license from Dolby Laboratories.
Trademark Acknowledgment
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Printed in China
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 242011-12-19 오전 11:36:02
Page 25
MEMO
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 252011-12-19 오전 11:36:02
Page 26
MEMO
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 262011-12-19 오전 11:36:02
Page 27
MEMO
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 272011-12-19 오전 11:36:02
Page 28
In Car Audio,
[ék-san-ik] means
Sonic Excellence by EXONIC
Mobile Entertainment
EXONIC Mobile Entertainment
Buena Park, CA.
www.exonicmobile.com
MUSA3_Manual_EXONIC_V0.3_111219_ybkim.indd 282011-12-19 오전 11:36:03
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.