Page 1
exmark.com
An
evolution
of the
industry-
defining
zero-turn
mower.
ground speeds up
to
10.0 mPh
Mows up to
acres per hour
7.3
23, 25 & 27 hp Kohler® Command™
V-Twin, 25 hp Kohler Command V-Twin
®
EFI, 22 & 29 Kawasaki
Kawasaki V-Twin EFI & 29 Kawasaki
V-Twin Propane engines.
48," 52," 60," & 72" full-floating
UltraCut™ Series 4 cutting decks.
Exmark® exclusive Parker unitized
pump and wheel motor system with
no hoses.
Heavy-duty canister air filtration
system.
High-capacity 12-gallon, single fuel
tank with single fill location.
V-Twin, 29
productivity, multiplied.
BEst-sElling Brand of mowing EquipmEnt for thE landscapE profEssional.
EXMARK MANUFACTURING COMPANY INC.
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right
to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligations. See your dealer for details on all of our warranties.
Exmark® and Lazer Z® are registered trademarks, and UltraCutTM is a trademark of Exmark Mfg. Co., Inc. ©2011 Exmark Manufacturing Company, Inc. All Rights Reserved. Printed in the U. S.A. 2011.
•
2101 ASHLAND AVENUE
•
P.O. BOX 808 • BEATRICE, NE 68310-0808 • CALL 402.223.6300 • FAX 402.223.6384
Page 2
exmark.com
lAzer z® s-series sPecificAtions
MODEL
NUMBER
ENGINE SIZE DECK WEIGHT LENGTH
HEIGHT
DEFL. DOWN DEFL. UP
WIDTH
LZS22KA484122 hp Kawasaki® V -Twin 48" UltraCut™ Series 4 1089 lbs 79.2 " 70.5" 59. 6" 51.8"
LZ S23KC524 23 hp Kohler
LZS24K A524
2
24 hp Kawasaki V-Twin 52" UltraCut Series 4 1088 lbs 79.2" 70.5" 64.8" 56.3"
®
Command
™
52" UltraCut Series 4 1088 lbs 79.2" 70.5" 64.8" 56.3"
LZS25KC604 25 hp Kohler Command 60" UltraCut Series 4 11 33 l bs 83.1" 70.5" 72.8" 62. 5"
LZS25EKC604 25 hp Kohler Command EFI 60" UltraCut Series 4 11 45 l bs 83.1" 70.5" 72.8" 62. 5"
LZ S27KC524
LZ S27KC6 04
27 hp Kohler Command 52' UltraCut Series 4 1088 lbs 7 9.2" 70.5" 64.8" 56.3"
1
27 hp Kohler Command 60" UltraCut Series 4 1133 l bs 8 3.1" 70. 5" 72.8" 62 .5"
LZS29KA724 29 hp Kawasaki V-Twin 72" UltraCut Series 4 1208 lbs 86 .1" 70 .5" 84.9" 73.5"
LZ S29EKC724129 hp Kohler Command EFI 72" UltraCut Series 4 11 90 l bs 86.1" 70.5" 84 .9" 73.5"
LZS29PKA604 Kawasaki FX801V Propane 60" UltraCut Series 4 1316 lbs 83.1" 70 .5" 72.8" 62.5"
LZS29PKA724 Kawasaki FX801V Propane 72" UltraCut Series 4 1403 lbs 86.1" 70.5" 84 .9" 73.5"
1
Units are carb-compliant. 2Carb-compliant unit only.
ENGINE
AIR FILTER
DRIVE SYSTEM
SPEED
PTO ENGAGEMENT
FUEL CAPACITY
DRIVE-WHEEL RELEASE
SAFETY PACKAGE
ROLLOVER PROTECTION SYSTEM (ROPS)
POWER COMPONENTS
DECK LIFT
CASTERS
CUP HOLDER
STYLE
WIDTHS AVAILABLE
DECKS
CUTTING HEIGHT
BLADE-TIP SPEED
TRACTOR FRAME
STEERING AND MOTION CONTROL
FRONT CASTER TIRES
DRIVE TIRES
TURNING RADIUS
PARKING BRAKE
SEAT
DIAGNOSTICS
EQUIPMENT
BLADE SPINDLES
ENGINE OIL
HYDRAULIC FLUID
ELECTRICAL
ENGINE HOURMETER
23, 25 and 27 hp Kohler Command V-Twin; 25 Kohler Electronic Fuel Injection (EFI); 22, 24 & 29 hp Kawasaki V-twin gasoline and
Kawasaki Propane engines; Kohler engines governed to 3,750 and Kawasaki engines governed to 3,750.
Heavy-duty canister air filtration system.
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated
reservoir, spin-on filter and heavy-duty components.
12 cc pumps and 14. 5 cubic inch motors (48" & 52").
12 cc pumps and 14. 5 cubic inch motors with integrated shock valve (60" & 72").
Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) for ward, 0–5.5 mph (8.9 kmph) reverse.
MagStop electromagnetic 200-ft-lbs clutch with spot brake.
High-capacity, 12-gallon, single fuel tank with single fill location (except LZS25EKC604). 8-gallon, single fuel tank with single fill
location on LZS25EKC604. For propane units, capacity is 43.5 lbs.
Allows unit movement without engine running.
Operator Presence Controls (OPC) and drive system interlock.
2-post foldable ROPS standard with seat belt and latch.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport
position.
0.50 thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Standard.
Full-floating UltraCut Series 4. Side discharge standard with the option to bag or mulch.
48," 52", 60" and 72." 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and
welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full-floating deck with 3
adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72".
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Approximately 18,500 fpm.
Unibody, welded, heav y-duty 1.5" x 3" tubular steel.
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness.
Also adjustable to 2 height positions.
13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52" & 60" units, 13 x 6.5-6; smooth-tread, semi-pneumatic on 72" and
LZS27KC604.
24 x 12.0-12, Turf Master® (60" & 72"). 23 x 9.5-12, Turf Master (48" & 52").
True zero-turn.
Lever-actuated disc brake and caliper.
High-back, bolstered seat with Elastomeric Vibration Control material.
Operational diagnostic s with integral fuel gauge. EFI unit has malfunction indication light (MIL). For propane units, the fuel gauge is
located on aluminum tank.
No maintenance, sealed and non-greasable spindles. 5.40" diameter cutter housing with 1.75" diameter splined blade driver and
1.0" diameter spindle shaft.
Exmark 4-Cycle Premium Engine Oil.
Exmark Premium Hydro Oil.
12-volt bat tery with 15-amp alternator except EFI units has 20-amp alternator.
Standard.
BEst-sElling Brand of mowing EquipmEnt for thE landscapE profEssional.
EXMARK MANUFACTURING COMPANY INC.
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right
to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligations. See your dealer for details on all of our warranties.
Exmark® and Lazer Z® are registered trademarks, and UltraCutTM is a trademark of Exmark Mfg. Co., Inc. ©2011 Exmark Manufacturing Company, Inc. All Rights Reserved. Printed in the U. S.A. 2011.
•
2101 ASHLAND AVENUE
•
P.O. BOX 808 • BEATRICE, NE 68310-0808 • CALL 402.223.6300 • FAX 402.223.6384
Loading...