Exgain E1800S, E1800T, E1800 User Manual

Please read this manual carefully before use Please keep this manual for future reference

ROHS

USER MANUAL

CONTENTS

1. INTRODUCTION AND SAFETY 1

2. PRESENTATION 3

3. INSTALLATION 6

4. CONTROL PANEL 10

5. APP USER MANUAL 11

6. USE 13

7. MAINTENANCE AND STORAGE 17

8.TROUBLE SHOOTING 18

9. EXPLODED VIEW 20

The products are manufactured by Zhejiang EXGAIN TECH Co., Ltd.

www.exgain-tech.com

Thank you for purchasing our product.

You will have and enjoy the extra free time while using

our robot lawn mower to mow your lawn. You will be

impressed with your lawn's appearance and best of

IMPORTANT!

Robot lawn mower can be dangerous if incorrectly used!

WARNING

The following pages contain important safety and

Carefully read and reviewinstructions in this manual.

all safety instructions, warnings and cautions contained in this manual.

Failure to read and follow these instructions, warnings

and cautions statements may result in severe injury or

death to persons and pets or damage to personal

all, EXGAIN robot did it for you.

1. INTRODUCTION AND SAFETY

1.1 Introduction

TThe robot mower may be used only by those who know how to operate it after reading and understanding the instructions in this manual.

Model: E1800 CE, RoHs approved.

operating instructions. Please read and follow all

property. It’s not permitted to modify the original design

Product, product specifications and this document are subject to change without notice. All other trademarks

are property of their respective owners.

1. INTRODUCTION AND SAFETY1. INTRODUCTION AND SAFETY1. INTRODUCTION AND SAFETY

IMPORTANT INFORMATION

Read through the Operators Manual carefully and understand the content before using your Robot.

1.2 Symbols on Mower

These symbols can be found in the mower. Study them carefully so you understand their significance.

1. The symbol is pasted on the top cover, Please read the means carefully before use the appliance.

1. WARNING-this is a dangerous power tool. Use care when operating and follow all safety instructions and warnings.

2. Read the owners/operating manual carefully and follow all safety instructions before operating the machine.

3. Objects can be thrown from mower while operating, keep a safe distance from the machine when operating, take caution.

4. Keep children, pets and bystanders away from mower when operating.

5. WARNING-Operate the disabling device before working on or lifting the machine.

6. Never use a high-pressure washer or even running water to clean the mower.

7. Sharp rotating blades. Keep hands and feet away and do not attempt to lift mower from this area.

8. WARNING-Do not ride on the machine.

2. Specifications symbol

Pasted on mower

Pasted on charging station

: Waste electrical products should not be disposed

waste. Please recycle where of as household

Authority or facilities exist. Check with your Local

ADDRESS

Enter into Address menu on mower display, press button on

Taizhou Tianchen Intelligence &Electrics Co,Ltd Product name: Robot lawn mower Model: XXXXX IPX4 Input: XXX V --- 2A 85W

20XX

Made in China

S.N.:XXXXXXXXXXX

RoHS

S.N.: XXXX XX XX XXX

year

month

date

number

Product name: Robot lawn mower Model: E1800 Ip54 Input: 29.4 V 4A 85W

Made in China

ROHS

S.N.:XXXXXXXXXXX

Product name: Robot lawn mower Model: E1800 Ip54 Input: 29.4 V 4A Ouput 29.4

: V

Made in China

ROHS

Zhejiang EXGAIN TECH Co., Ltd.

retailer for recycling advice.

of robot. All modifications are made at your own risk.

1 2

54 6

7 8 9

- 1 -

the charging station,mower will receive the correct address,

Factory already matched the address before delivery.

select yes on display.

1. INTRODUCTION AND SAFETY

This label is pasted on charging

station, please make

sure to position this side towards lawn interior. Failure

to do may result in damage to property or persons.

DANGER! Sharp rotating

blade. Keep hands and feet

injury can away. Serious

4. Charging station symbol.

5. Warning symbol.

occur.

1.3 Symbols in the User Manual

These symbols can be found in this user manual.

A warning box indicates a risk of personal injury exist.

An information box indicates a risk of material damage exist, especially when the stated instructions are not followed. The box is also used where there is a risk of

WARNING

xxxxxxxxxxxxxxxxxxxxxxxxx.

IMPORTANT INFORMATION

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

user error.

1.4 Safety instructions

- Read the owners/operation manual carefully and

and warning instructions.follow all the safety

- This machine has sharp rotation blades! Never allow operate unattended; keep bystanders, the mower to mower when in operation.children and pets away from

- Never allow anyone to ride or sit on mower.

- Never allow anyone or person who is not familiar with

of the mower to operate the mower.the safe operation

- Keep hands and feet away from the cutting blades

and parts.other moving

- Never attempt to service or adjust the mower while it

- Inspect and clear the mowing area of all debris (toys,

items of clothing, anything with a height tree branches, mower.less than 6cm) before operating the

- Never raise the mower or attempt to inspect the

is operating.blades while the mower

- Always turn off the power before lifting the mower or

adjustment.attempting any

- When operating the mower in manual mode, maintain

wear proper foot apparel.

- Do not operate the mower on slopes greater than 30

a firm footing is not possible.

device is damaged or inoperable.

- Do not attempt to disable or defeat any safety feature

is in operation.

from behind or around the mower and a safe distance

manual operation on slopes wheredegrees or use it in

- Do not operate the mower if any safety feature or

or device.

- Use heavy gloves when inspecting or servicing the

- Wear eye protection and use gloves when installing

driving the wire stakes/pegs. Firmly the virtual wire and wire from becomingdrive all pegs in order to keep the

- Do not use the charging station power supply with an

- Use only the original equipment power pack and power

with this mower. supply/charger

- Do not use the power supply/charger if the cord has

- Do not place metal objects in the area of the charging

charging station. sheets on the

- Do not place metal objects across the charging heads

- Do no spray water directly into the docking area of the

or onto the control panel on charging charging station

- The mower has sharp rotating blades! Please care the

mowing, in case of serious injury occur.mower when it is

- Keep the lawn mower in perfect operating conditions maintenance procedures outlined by performing the maintenance by the manufacturer. Good guarantees

better performance and longer service life.

- In order not to irreversibly damage electric and

wash the robot with water jetselectronic parts, do not

partially or at a high pressure and do not plunge it

- It is absolutely forbidden to use the robot in explosive

environments. and flammable

- The operator or user is responsible for accidents or

other people or their property.hazards occurring to

blades.

a tripping hazard.

extension cord.

become damaged.

of the mower.

station.

thoroughly in water, as it is not watertight.

- Fill up all small holes and even all small mounds inside

working area. It’s to keep the robot with perfect operating.

CAUTION!

Position this side of the Charging Station

towards lawn interior.

DANGER

- 2 -

2. PRESENTATION

This chapter contains information you should be aware of before placing the installation.

Emergency button Rotate it to turn on the mower.

LCD display

Blade shield

Charging sheet

Power button

Home button Press it when the mower is on, it goes back to charging station automatically.

Virtual wire light

Charging light Red: charging Green: full charged / idle.

Consumable parts:

1. Blades

2. Virtual wire

3. Virtual wire connectors

4. Pegs

5. Stakes

2.1 What’s in box

Blade

- 3 -

6. Rear running wheels

7. Front wheels

20 21

Colorless: in good connecting Red: Broken wire/ idle

Power terminal

Virtual wire terminal

Hole for stake

Charger

Virtual wire (100m): Used to mark mowing area and create a virtual wall for the mower.

Virtual wire connectors (10pcs): Used to connect virtual wire.

Pegs (100pcs): Used to fix the virtual wire to the ground around the lawn perimeter and around obstacles.

Stakes (4pcs): Used to fix the charging station to the ground.

Blades for replacement (3pcs)

English user manual

Charging head

red terminal black terminal

Press it to turn off the mower.

Charging head

2. PRESENTATION

2.2 Function of E1800

- Lift sensor

There are lift sensors located between the top and middle

- Tilt sensor

There are tilt sensors installed on the mower too, when

mower is tilted over 30 degrees in any direction, it the seconds.stops working within 2

- Bump sensor

The whole top cover is movable. Both front and side of mower equipped with bump sensors that will activate when the mower strikes solid, fixed object when

that object is at least 6cm in vertical height from the supporting surface of the mower. When the bump sensor

- Rain sensor

There are two rain sensors located on the mower.

The mower will go back to the charging station

when it's raining.automatically

Turn on: the mower will go back home if it is raining. Turn off: the mower will go on mowing when it is raining.

- Wifi

cover. If the mower is lifted from ground, it will stops

working within 1 second.

activated, the mower will back up for working.

Rain sensors can be selected ON/OFF from control panel.

- Mowing schedule

- Touch sensor

Set up one week (From Monday to Sunday, once for

schedule from control panel. This each day) cutting

- Anti-theft function

Mower has password protection option to guard against

theft. What's more, the mower can not be turned on

- Cutting width: 21cm

- Easy cutting height adjustments

2.5cm-5.5cm selected on LCD display.

- Auto recharge system

When the mower senses a low battery situation, it will shut off the cutting motor and search for the virtual wire.

Once found it will follow the virtual wire to the charging

station for recharge automatically. Once charging is

complete, the mower will back up a few centimeters ready to go again in stand by mode.

- Emergency stop switch

There is an emergency button located on the top of

color. mower and in red

function should be used together with AREA function.

without a charging station.

- Two cutting modes

There are two cutting modes of the mower, go straight

efficiency). and go circle (high In Auto, mower selects cutting mode intelligently. It goes straight if the grass is sparse or it has be cut off,

long.and it goes circle if the grass is dense or In manual mode, the mower will go where you direct it.

use 100m-600m of virtual wire). The wire. (we suggest to

station, the virtualmower will follow virtual wire to charging

on the virtual wire wire acts as a virtual fence. It will get

wire and starts cutting inside.

- Mower stops working if virtual wire is cut off or

power off.charging station is

If virtual wire is cut or broken, or the charging station loose power, the mower will stop working within 3 seconds

- Five steps to safely start the mower

There are five necessary steps to start the mower:

- Overload protect

The brushless cutting motor and each of the two running

are monitored continuously during operation for motors

cause these motors to over-loadany situation that may

In the event this is detected, the mower stops operating.

- Waterproof

Waterproof design, there is an inner cover under top

inside parts from humidity. cover which protect

- LCD display

Virtual wire

The robot lawn mower can't be operated without a virtual

- Gyroscope

The mower has gyroscope to keep it going straight on

until it meets charging sheets, then it gets off from virtual

The waterproof class is I

- Subarea setting

You can select Subareas for the mower to cut. This works

well for large lawn. See Section 5.12. This function should be used together with schedule.

- Different languages selection.

- 4 -

P54.

Connect charging station with power supply by charger and make sure the recharging light is in green color.

2. Connect virtual wire to charging station and make sure it is in good connecting(virtual wire light in colorless).

3. Turn on the power button and rotate the emergency button.

4. Input password if selected and select mode.

5. Select working time if needed(10-500mins).

- Range

- Intelligent cutting height adjustment

There are four range options, user can choose the

There are 7 settings which can be set on display directly.

distance when robot hit virtual wire according the condition of different lawns.

The Android user search “EGROBOT” in the Google

Store to download the application.

The IOS user can search “EGROBOT” in the Apple

inclines.

Play to download the application.

Rotate it to turn on the mower. Press it to turn off the mower.

Touch the handle when the mower is cutting, it will cease function.

2. PRESENTATION

2.3 Technical data

E1800E1800S

Model No.

Coverage(for once charging)

500m ±20％

1500m ±20％

300m ±20％

900m ±20％

Working capacity

52*39*27cm(LWH)

19KGS

16KGS

Mower size

Gross weight

Net weight

85W

≤60db

3pcs

2.5-5.5cm 21cm

35m/min 3000rpm

30degree Max slope

40℃

Qty for cutting blades

Blades rotate speed

Max ambient functioning temp.

Rated power

Noise

Cutting height Cutting width

Cutting speed

Hill capability

Mower technical date

Note: How large an area is mow per recharged depends

primarily on the condition of the blade and the type of

grass, growth rate and humidity. The shape of garden is also significant. If the garden mainly consists of open lawns, mower can mow more area per hour than if the

garden consists of several small lawns separated by

600m/0.5mm

100m/0.5mm

Virtual wire maximum length

Standard virtual wire length

70*50*17cm(LWH)

Charging station size

Charging station and virtual wire

2.4 Working route

Follow virtual wire walking is optional

Intelligent cutting height adjustment

Rain sensor Auto recharge

Intelligent spiraling

Go straight Anti theft Lift sensor

Tilt sensor

WIFI Application

Bump sensor

LCD display

Waterproof

Touch sensor

Time set-up system

Emergency switch

Password set-up

Gyroscope

Average working time

Type of battery Battery capacity

Charging time

Mower is disabled if virtual wire is cut or broken

Mower is disabled without power to charging station

trees, flower beds and passages.

Language option

≤2hours≤1.5hours

4.4Ah2.2Ah

Lithium

Subarea setting

Range option

Battery

Functions:

- 5 -

E1800T

700m ±20％

1800m ±20％

6.6Ah

≤ hours3

3-4hours

2-3hours1hours

3. INSTALLATION

This chapter describes how you to install this mower. Before starting the installation, read the previous

Read the whole of this chapter before starting the installation. How the installation is made also affects

how well the mower will work. It is therefore important

3.1 Preparations

Training

- Read the instructions carefully. Be familiar with the proper use of the mower.controls and the

- Never allow people unfamiliar with these instructions the mower. Local regulations or children to use

- The operator or user is responsible for accidents or to other people or their property.hazards occurring

3.2 Hardware adjustments

Blade adjustment

The mowing system used by this mower is based on

an effective and energy efficient principle. Unlike

normal lawn mowers, the mower cuts the grass instead

Rain sensors on the mower is optional ,(See P15-5.8 RAIN) we recommend you allowing the mower to mainly mow in

dry weather to obtain the best possible result. Even

though the mower can mow in rain, wet grass easily collects on the mower and the risk of slipping on steep

The blades must be in good condition to obtain the best mowing result. In order to keep the blade sharp for as long as possible it is important to keep the lawn free

from branches, small stones and other objects

3. INSTALLATION

chapter 2. Presentation.

the installation carefully. to plan

may restrict the age of the operator.

of striking it off.

slopes is greater.

(especially the objects less than 6cm height). Please fill

up small holes and even out small mounds to make sure

lawn is flat.

How to adjust the cutting height:

Cutting height explanation: take 3cm level for example.

3.3 Charging station installation

- Choose best installation place, please make sure no magnetic interference and no it is flat, no water, station. obstacle in the front of charging

- Please fix the charging station on horizontal place.

Charging station best install place:

1. Make sure it is flat

2. No magnetic interference

3. No water and far away from puddle

4. No obstacle in front of charging station

- Lay virtual wire

- Fix the charging

stakes by

IMPORTANT INFORMATION

Before fix the charging station on the lawn, please examine the lawn and decide the best location where

is easy for the mower to find the station for recharge.

as picture shows.

station with four

IMPORTANT INFORMATION

Do not tread or walk on the charging station plate.

3CM

Grass Height

Cutting height: 3cm

- 6 -

3cm

Peg

hammer.

1. Select SET and enter it by pressing key .

3. Select cutting height from 2.5-5.5 by pressing key .

2. Select CUTTING HEIGHT and enter it by pressing key .

4. confirm it by pressing .

+ 16 hidden pages

Exgain E1800S, E1800T, E1800 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual