EXFO Photonic Solutions Div FTB-5230 User Manual

Page 1
FTB-5230
NETWO R K TESTING—O PTICAL
OPTICAL SPECTRUM ANALYSER
Telecom Test and Measurement
www.EXFO.com
FTB-400 Universal Test System
Platform Compatibility
Designed for first-class cost-effectiveness
Page 2
Built for xWDM Test Applications
The FTB-5230 Optical Spectrum Analyzer (OSA) is designed for testing both DWDM and CWDM systems within metro/access links and long-haul networks.
This cost-effective module is housed in the FTB-400 Universal Test System, EXFO’s tough, portable test platform. What’s more, the FTB-5230 covers the entire transmission wavelength range, from 1250 nm to 1650 nm.
ID EAL FO R DWDM TE STING
With a commonly used resolution bandwidth of 0.1 nm, the FTB-5230 is ideal for characterizing DWDM networks with a channel spacing of down 50 GHz. Thanks to user-friendly features such as pass/fail analysis and trace comparison, this modular OSA helps you ensure high-quality transmission.
THE F TB-400 P LATFOR M’S M ULTITASK ING ADVANTAGE
The FTB-400 Universal Test System offers rapid, powerful multitasking with simultaneous acquisitions and post-processing. Combine up to seven single-slot field-interchangeable modules for hundreds of versatile combinations.
Combine the three-slot FTB-5230 CWDM OSA, the short-dead-zone FTB-7200D OTDR and the highly versatile FTB-3930 MultiTest Module to certify fiber and signal quality by characterizing entire networks. Optimize CAPEX thanks to the advantage of combining an OSA, an OTDR, a power meter, an OLTS and many other instruments inside a single platform.
FTB-5230
Optical Spectrum Analyzer
OPTIMIZED FOR COST-EFFECTIVENESS
EXFO’s FTB-5230 O SA was developed with a no-frills approach. It only includes essential OSA functionalities, delivering first-class cost-effectiveness. Its key features include:
Drift mode Excellent optical specifications Wide wavelength range of 1250 nm to 1650 nm First-class ruggedness, fitting the most severe test conditions
The FTB-5230 Optical Spectrum Analyzer is a three-slot module contained inside EXFO’s FTB-400 field-testing platform.
www.EXFO.com
Page 3
Either in the field or at the central office, the FTB-5230 gets the job done.
FTB-5230
Optical Spectrum Analyzer
www.EXFO.com
Monitoring wavelength and power drift is essential in CWDM systems.
Measuring peak power, integrated power as well as total in-channel power enables an extremely tight control of the network.
Since CWDM systems generally use uncooled lasers, whose typical wavelength drift is 0.1 nm per degree Celsius, it is critical to track the evolution and drift of the lasers’ central wavelength. And since path attenuation can significantly vary within a single channel, passband drift also creates power drift. This is why it becomes extremely important to monitor— simultaneously for all CWDM channels—the evolution of peak power and wavelength over time. The FTB-5230 Optical Spectrum Analyzer’s Drift mode functionalities makes this an easy task.
TOTAL IN-CHANNEL POWER MEASUREMENT
With channels as wide as CWDM channels, monitoring peak power is not enough. The chosen OSA must be able to track the total in-channel power— a feature only offered by EXFO’s FTB-5230.
RUGGEDNESS AND OPTICAL PERFORMANCE
The FTB-5230 Optical Spectrum Analyzer is truly optimized for DWDM/CWDM applications, and ready for the field-testing challenges they bring. Like all of EXFO’s OSAs, it comes with high-end optical specifications, as well as the added and unique advantage of being rugged, portable and battery­operated.
THE TOOL BOX ADVANTAGE
EXFO’s exclusive ToolBox software suite runs the test module applications on the FTB-400 Universal Test System. Easy-to-read graphics and clear instructions simplify testing and increase productivity in the field.
All applications supported by the FTB-400 have a common graphical user interface.
ON E-B UTTON TESTIN G
Simplify testing and stay on schedule with one-button testing and the FTB-5230’s integrated software. If your deadline is tomorrow, the last thing you need is software that will slow you down. Turn on the unit and the last settings are ready for CWDM system characterization. Press Start, and within seconds, you receive your data.
The Choice for CWDM O SA Testing
Page 4
FTB-5230
Optical Spectrum Analyzer
SPFTB5230.2AN © 2006 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada 06/07
ORDERI NG INF OR MATION
NOTES
a. At 23 °C ± 2 °C, after warm-up. b. Full width at half maximum. c. At 1550 nm. d. From 1520 nm to 1610 nm. e. Typical. f. After user calibration in the same test session,
within 10 nm from each calibration point.
g. At 1550 nm, –10 dBm.
GENERAL SPEC I FI CATION S
Connector
EI-EUI-
28 = UPC/DIN 47256
EI-EUI-
76 = UPC/HMS-10/AG
EI-EUI-
89 = UPC/FC narrow key
EI-EUI-90 = UPC/ST EI-EUI-
91 = UPC/SC
EI-EUI-
95 = UPC/E-2000
EA-EUI-
28 = APC/DIN 47256
EA-EUI-
89 = APC/FC narrow key
EA-EUI-
91 = APC/SC
EA-EUI-
95 = APC/E-2000
Example: FTB-5230-EI-E UI-89
FTB-5230-XX
SPECIFICATIONS
a
Wavelength range (nm) 1250 to 1650 Resolution bandwidth FWHM
b, c
(nm) 0.1
Wavelength uncertainty
d, e
(nm) ± 0.1
± 0.02
f
Measurement ranged(dBm) 10eto –60 Power uncertainty
e, g
(dB) ± 0.4
Optical rejection ratio
d, e
at 100 GHz (dBc) 45
Optical rejection ratio
d, e
at 50 GHz (dBc) 40 Scanning timee(s) 4 (35 nm span, multiple-peak analysis) PDL
c, e
(dB) ± 0.1
ORL (dB) ≥ 40
Temperature operating 0 °C to 40 °C (32 °F to 104 °F)
storage —20 °C to 50 °C (—4 °F to 120 °F) Relative humidity 0 % to 95 % non-condensing Connectors EI (EXFO U P C Univers al Interface)
EA (EXFO APC Universal Interface) Size (H x W x D) (module) 960 mm x 760 mm x 260 mm (3 3/4 in x 3 in x 10 1/4 in) Weight (module) 2 kg (4 lb)
EXFO Corporate Headquarters > 400 Godin Avenue, Quebec City (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 Fax: 1 418 683-2170 info@EXFO.com
Toll-free: 1 800 663-393 6 (U SA and Canada) www.EXFO.com
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. All of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. Contact EXFO for prices and availability or to
obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at http://www.EXFO.com/specs
In case of discrepancy, the Web version takes pr ecedence over any printed literature.
EXFO Montreal 2650 Marie-Curie St-Laurent (Quebec) H4S 2C3 CANADA Tel.: 1 514 856-2222 Fax: 1 514 856-2232 EXFO Toronto 160 Drumlin Circle Concord (Ontario) L4K 3E5 CANADA T el.: 1 905 738-3741 Fax: 1 905 738-3712 EXFO America 3701 Plano Parkway, Suite 160 Plano, TX 75075 USA T el.: 1 800 663-3936 Fax: 1 972 836-0164 EXFO Europe SOUTHAMPTON > Omega Enterprise Park, Electron Way Chandlers Ford, Hampshire S053 4SE ENGLAND Tel.: +44 2380 246810 Fax: +44 2380 246801 EXFO Asia 151 Chin Swee Road, #03-29 Manhattan House SINGAPORE 169876 Tel.: +65 6333 8241 Fax: +65 6333 8242 EXFO China No.88 Fuhua, First Road Shenzhen 518048, CHINA T el.: +86 (755) 8203 2300 Fax: +86 (755) 8203 2306
Central T ower, Room 801, Futian District Beijing New Century Hotel Office T ower, Room 1754-1755 Beijing 100044 P. R. CHINA T el.: +86 (10) 6849 2738 Fax: +86 (10) 6849 2662 No. 6 Southern Capital Gym Road
Find out more about EXFO's extensive line of high-performance portable instruments by visiting our website at www.EXFO.com.
Loading...