EXCURSION SX SAT, SX 15, SX3C, SX4C, SX5C User Manual

1

EXCURSION

CONGRATULATIONS !

Dealer's Name____________________________

Date of Purchase__________________________

Installaon Shop__________________________

Installaon Date __________________________

CAU TIO N !

You now own an EXCURSION SX Series Component Speaker, the product of an
uncompromising design and german engineering philosophy. A product made
from Car Audio fanacs who truely believe in the relentless pursuit of perfecon.

EXCURSION speakers are the result of several decades of product improvements,
compeon, innovaon and highest quality parts and control standards in industry.
When properly installed these speakers will provide you with many years of
listening pleasere and are the perfect balance between high fidelity, extreme
performance and long-lasng reliabilty.

Should your speaker ever need a service, Please record your informaon on
the following lines to refer to in the event that you may need it later.

At EXCURSION Intl. we are confident you will have many years of outstanding
enjoyment from your high performance investment. For maximum performance
we recommend that you have your new EXCURSION SX Speakers installed by
an exclusive Authorizied EXCURSION Dealer

To learn more about EXCURSION, please visit us on the World Wide Web at

hp://www.excursion.us

Connous exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. EXCURSIO N Speakers are capable
of producing sound pressure levels well over 170dB. Please observe all local sound ordinances while listening to your EXCURSION System.
EXCURSI ON Intl. acceptss no liability for hearing loss, bodily injury, or property damage due to the result of use or missuse of this product.

2

2-Layer Black Paper Cone, ADC Finish: The cone and its choice of material effect
almost everything in regard to the Sound Quality of the speaker. Paper, one of
the most natural materials, deliver with its less on weight an outstanding dynamic
and authenc reproducon of the music signal. Along with the sffening ADC
(Acve Dynamic Coang) of Cone it finish into the perfect formula for the best
high efficient High End OEM Upgrade Replacement Design on the market. This
set the benchmark for speakers up to 75 RMS / 225 Wa Music Power Handling.

Phased Plug Dustcap Design: effect in higher resoluon of vocal mid secon at none
axial or difficult OEM speaker posion, while reducing unwanted distoron and losses.

DIN sized fully vented Steel Basket: The EXCURSION steel baskets are DIN sized
for easy OEM Upgrade Replacement. Their symmetrical design together with the
stamped EXCURSION logos ensure outstanding stac, aerodynamic and sffness.
Coated with black anvibraon colour the baskets are acouscal deaden to provide
best results. We at EXCURSION took especially care of maximum cooling of voice coil.
All baskets are symmetrical vented below the spider for maximum heat transfer,
knowing that a cool voice coil is able to take more power and handle more power.

Voice Coils: The heart of EXCURSION Speakers are those very carefully designed
Voice Coils. Using the finest material of pure copper which is precise winded on
aluminium formers. Aluminium, one of the best heat-conducng materials and
known for best sffness and less weight, back up the long life of your investment.
As the best is sll not enough we have pole piece vented all midranges for cooling.

Pure Silk, So Dome Tweeter: The outstanding performance of the EXCURSION
Tweeters set the biggest difference to the competors in the Car Audio market.
Using the finest materials of Pure silk with perfect EXCURSION lineary, the
EXCURSION Tweeters love to get compared with the leading audiophile`s in the world.

SX-SAT: We at EXCURSION transfer Compeon Know How direct to your car. We
created an axial one pc 2way Satelite asure professional sound stage and integraon.

One way Hide Away Plug&Play Crossovers: We at EXCURSION have designed the
smartest high quality crossover soluon possible. We created the smallest sized
crossover focus the real importants of best Sound. We are using best parts and cables
get plugged in various combinaons and cover all standard situaons. With our Single
way crossovers and range of level resistors your investment is prepared even for
demands of Bi-Wiring and individual level tuning within demands of in car posion.

EXCURSION SX SPEAKER FEATURE

3

EXCURSION

It is recommend that you have your new EXCURSION SX Series Automove
Speakers professionally installed by your authorizied EXCURSION dealer. This
will ensure use of proper installaon techniques and materials and save much
me and efforts. If you choose to perform your own installaon, the following
instrucon will give you direcon toward making your purchase complete. Read
the following informaon and precauons carefully. Failure to follow the stated

precauons may result in personal injury or damage the audio system or vehicle.

A.) Always make sure the speaker will easily fit into the intended mounng locaon
and that there is adequate cavity depth to accept the magnet structure.

B.) Check for adequate clearance between speaker and window, window crank,
power window mechanism, seat, glove box, rear deck torsion bars and other
items which may interfere with the speaker`s mounng. This is especially
important if any hole cung is required. Complete speaker, mounng size and
depth requirements can be found on page 9 of these instrucons. A good way to
confirm speaker place meet on a door or body panel is to place the speaker`s
die cast mounng ring onto the surface. Check for a flat mounng surface,
free from all obstrucon.

C.) The method of installaon choosen and level of execuon will effect the
overall performance of the EXCURSION Speakers. Thread each installaon
step with a high degree of aenon.

D.) Do not mount the speaker where water may splash the woofer cone.
A plasc cup or some heavy gauge plasc sheeng may be needed in some
locaons that are exposed to moisture from behind the body panel.

E.) Care must be taken to prevent low frequency cancelaon caused by air
leakage between the front and rear of the speaker (such as when mounted
on a curved or uneven surface, or when mounted in an oversized hole)

F.) Mounng panel reinformcement may be necessary in some cases in order
to prevent surface flex. This can be achieved by mounng the speaker on a
metal or wooden sub-baffle behind the body or door panel.

Consult an installaon specialst for further direcon.

Pre-Installaon Instrucons: