TI25-160001 W8
INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TI25-160001 W8
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
- When using electrical appliances, basic safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system corresponds to the
same specified on the appliance.
- To protect against risk of electri cal shock, do not put cord, pl ug, base or motor in water or
other liquids.
- Never connect two or more a ppliances in t he sa me pl ug.
- When not in us e, un plug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts bec ause blades ar e sha rp. " Handle carefully".
- Kee p hands and utensils out of containe r while blending to p revent t he poss ibility of
severe personal i njury and or damag e to blender. A plastic spatula may be use d but
must be used only when blender is "NOT RUNNING".
- Only remove the contain er when blender "COMPLETELY STO PPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF).
- It's recommend to cut food in small pieces and maintain food below container's frieze
height avoid spilling.
- Place a small quantity os food with blender off. Turn on blender and add the rest of
food that you want to process.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula to push
mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to
the main power outlet.
- If it’s necessary to disassemble the knife and the bushing follow the instructions of the fig. 1.
TI25
TI25
The pictures/drawings are illustrations. All data can be changed without notification.
Texas Restaurant Equipment
12922 Hempstead Hwy
Houston, TX 77040
P: (713) 690-1231
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
37.023-3
37.261-3
534
598
641
9.410-3
361
37.229-3
260
604
37.232-3
385
642
597
601
37.919-3
37.920-3
37.240-3
552
37.211-3
2.082-3
37.226-3
37.231-3
37.206-3
592
607
37.235-3
332
37.901-3
37.015-3
37.079-3
37.058-3
37.270-3
37.581-3
37.062-3
37.154-3
37.511-3
37.210-3
37.570-3
37.033-3
37.021-3
37.234-3
2.007-3
623
643
594
37.241-3
37.239-3
37.063-3
9.413-3
610
37.212-3
37.256-3
635
587
574
Polyurethane Ring
Shaft Adapter
Allen Screw 1/4”
Press Washer
Washer
Retainer
Screw 5/16”
Base
Switch (On/Off)
Nut 3/16”
Container’s Support
Screw 3/16”
Washer
Press Washer
Nut 1/4”
Latch Pin
Latch Body
Switch Cover
Screw
Motor Top Cover
Cord Connection
Motor
Motor Cover
Special Screw
Press Washer
Nut 1/2”
Rabbet
Screw 1/4”
Blender Support
Foot
Shaft
Chuck Nut
Container
Container Assembly
O’ring
Bushing (Chuck)
Underfriction Washer
Bracket
Knife
Nut
Lid
Latch Support
Rubber Ring
Nut
Washer
Press Washer
Special Screw
Gap Base
Retainer
Strain Relief
Nut 5/16”
Finishing
Base
Nut
Lock Washer
Stud 1/4”
19
25
26
29
30
31
32
33
35
36
39
40
(TI 25) (TI 25)
23
1
2
3
13
14
15
4
5
7
16
17
42
11
Technical Data
Power (HP)
Amperage (A)
Speed (rpm)
Capacity (l)
Weight (Kg/lbs)
Dimension W x H x D (cm/in)
Voltage (V)
INDUSTRIAL BLENDER 25 LITERS
INDUSTRIAL BLENDER 25 LITERS
item code description
44
46
45
41
10
28
43
6
L1
L2
G
110V
1
2
3
4
Wiring Diagram
MOTOR
SWITCH
7
OFF
ON
Procedure to
Disassemble the Knife
Procedure to Disassemble the Container
Unscrew and remove four nuts 15
located under the base 8.
Remove the pitcher.
Lock the shaft 31
with the special tool
and turn the nut 40
using the standard
tool (Hex.3/8”).
Remove the nut and
all the movable pieces
will be free.
Procedure to Disassemble the Bushing
40
31
standard
tool
special
tool
FIG.1
To reassemble proceed
in inverse sequence.
Using the special tool, unscrew
the bushing nut 32 and remove
the bushing 36.
TI25-160001 W8
37
37
52
53
49
38
34
12
13
54
56
55
20
22
24
8
18.0
1 1/2
3430
25
25.1/55.2
46/18.2 x 133/52.4 x 57/22.5
120 (60 Hz)
9
47
48
27
5
51
21
50
Loading...