Exar XRP7720EVB-DEMO-1, XRP7724EVB-DEMO-1, XRP7725EVB-DEMO-1 User Manual

XXRRPP77772200//77772244//77772255EEVVBB--DDEEMMOO-

11

dd

mm

Rev. 2.0.0

-

QQuuaadd CChhaannnneell DDiiggiittaall PPWWMM//PPFFMM DDeemmoo BBooaar

PPrrooggrraammmmaabbllee PPoowweerr MMaannaaggeemmeenntt SSyysstte

January 2014

GENERAL DESCRIPTION

The XRP7720/7724/7725EVB-DEMO-1 board is
a complete, four channel, power system. It
provides 3.3V, 2.5V 1.5V and 1V at a
maximum of 3A, 3A, 5A and 10A loads
respectively. The 1.5V and 1V supplies can be
adjusted in 2.5mV increments, the 2.5V
supply in 5mV increments, and the 3.3V
supply is adjustable in 10mV increments. The
order and ramp rates for each supply can be
programmed to accommodate any sequencing
requirement. All power supply operations can
be controlled over an I
output voltages and currents can also be
monitored. Two GPIO and three PSIO signals
are available and can be programmed to
provide a variety of functions. Unused
GPIO/PSIO pins can be programmed as I/O
expansion for a microcontroller. The board is
supported by PowerArchitect
directly onto the Exar Communications Module
(XRP77xxEVB-XCM).

2

C interface. Faults,

TM

5.1 and plugs

EEVVAALLUUAATTIIOONN BBOOAARRDD MMAANNUUAALL

XRP7724EVB-DEMO-1

FEATURES

• XRP7720/XRP7724/XRP7725
Programmable Controller

• 4 Channel Power System

• Wide Input Voltage Range: 5.5V-18V

2

• I

C Interface

− Programming

− Monitoring

− Control

r

e

Exar Corporation www.exar.com
48720 Kato Road, Fremont CA 94538, USA Tel. [phone] – Fax. [phone]