Ladder Assembly Instruction
3 Before beginning this step, check for the
following:
● Make sure the ladder frame facing
you has a fourth hole drilled at the
top as shown in the picture
● Make sure the plastic ladder steps
are slanting upwards
Slide on the three plastic ladder steps
and align each one with the pre-drilled
holes on the ladder frames.
BEFORE BEGINNING, check to ensure all hardware and ladder parts are included.
If anything is missing please contact us at sales@exacme.com.
D
$
%
&
6 x long screws
2 x short screws
6 x nuts
E 2
F 3 ×
G 1 × black foam tube
1 Place one ladder frame on a flat surface.
Slide the black foam tube onto the ladder
frame, go as far to the left as possible (at
least ⅔ way).
2 × ladder hooks
× ladder frames
plastic steps
2
Once the black foam tube is on the ladder
frame, slide the second ladder frame into
the black foam tube as indicated in the
picture. Stop when the ladder frame
connects with the first ladder frame and
makes a U shape as shown in the picture.
Center the black foam tube between the
two frames.
4 Place the flat side of the nut into the
plastic step as indicated in the picture.
Take the long screw, and place on the
opposite side of the plastic step. Hold nut
in place and tighten the screw.
5 Repeat steps 4 & 5 five more times until
all the long screws and nuts are
tightened.
6 Attach ladder hooks to the top of the
ladder and tighten the short screws. This
2
completes the ladder assembly.
WARNING:
Weight limit 200 lbs.
Not suitable for children under 3 years.
For use under adult supervision. Remove
ladder when not in use.
Loading...