EVOX RIFA PME278 User Manual

查询PME278供应商

PME278

• EMI suppressor, class X1, metallized paper

• 0.001 – 0.15 µF, 440 VAC, +110 °C

• High dU/dt capability.

• Excellent self-healing properties.

Ensures long life even when subjected to
frequent overvoltages.

• Good resistance to ionisation due to
impregnated dielectric.

• The capacitors meet the most stringent
IEC humidity class, 56 days.

• The impregnated paper ensures excellent
stability giving outstanding reliability
properties, especially in applications
having continuous operation.

TYPICAL APPLICATIONS CONSTRUCTION

The capacitors are intended for use as
interference suppressors in X1, across­the-line, 440 VAC applications.

Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing material
meeting the requirements of UL 94V-0.

TECHNICAL DATA

Rated voltage

Capacitance range

Capacitance tolerance

Temperature range

Climatic category IEC

Approvals

Dissipation factor tan

δδ

δ

δδ

440 VAC 50/60 Hz

0.001 – 0.15 µF

± 20%

–40 to +110°C

40/110/56/B

S, N, D, FI, VDE, SEV, IMQ

≤ 1.3 % at 1 kHz

L

H

p ± 0.5

l

d = 0.6 for p = 10.2

0.8 for p = 15.2 and 20.3

1.0 for p = 25.4

l = standard : 30 +5/-0 mm

option : short leads, tolerance +0/-1 mm

(standard 6 mm, code R06)
Other lead lengths on request

B

∅ d

Insulation resistance

Resonance frequency

In DC applications

Test voltage between terminals

≥ 12000 MΩ
Measured at 500 VDC after 60 s, +23°C

Tabulated self-resonance frequencies f0
refer to 5 mm lead length.

Recommended voltage: ≤ 1000 VDC

The 100% screening factory test is
carried out at 2700 VDC. The voltage level is
selected to meet the requirements in
applicable equipment standards. All
electrical characteristics are checked after
the test.

ENVIRONMENTAL TEST DATA

Vibration IEC 60068-2-6 3 directions at 2 hour each No visible damage

Bump IEC 60068-2-29 4000 bumps at 390 m/s

Solderability IEC 60068-2-20 Solder globule method Wetting time for d ≤ 0.8 < 1 s

Active flammability EN 132400

Passive flammability IEC 60384-14 (1993)

Test Fc 10 – 500 Hz at 0.75 mm or 98 m/s

2

Test Eb No open or short circuit

Test Ta for d > 0.8 < 1.5 s

EN 132400

2

No open or short circuit

No visible damage

Humidity IEC 60068-2-3 +40°C and 56 days

168

Test Ca 90 – 95% R.H.

PME278

ARTICLE TABLE

Capaci- Max dimensions Quantity per package Max Approvals
tance in mm R30 R06 reel Weight f

taped

µF B H L p pcs pcs pcs g MHz V/µs

0.0010 3.9 7.5 13.5 10.2 1000 2000 700 0.7 53.0 2000 √√√√√√√ PME278RA4100MR30

0.0015 3.9 7.5 13.5 10.2 1000 2000 700 0.7 44.0 2000 √√√√√√√ PME278RA4150MR30

0.0022 3.9 7.5 13.5 10.2 1000 2000 700 0.7 37.0 2000 √√√√√√√ PME278RA4220MR30

0.0033 4.1 8.2 13.5 10.2 1000 2000 600 0.9 30.0 2000 √√√√√√√ PME278RA4330MR30

0.0047 5.1 10.5 13.5 10.2 800 1600 600 1.2 24.0 2000 √√√√√√√ PME278RA4470MR30

0.0068 5.2 10.5 18.5 15.2 500 1000 600 1.7 18.5 1400 √√√√√√√ PME278RB4680MR30

0.010 5.2 10.5 18.5 15.2 500 1000 600 1.7 15.5 1400 √√√√√√√ PME278RB5100MR30

0.015 5.5 11.1 18.5 15.2 500 1000 500 2.0 13.0 1400 √√√√√√√ PME278RB5150MR30

0.022 8.5 14.3 18.5 15.2 300 500 350 3.8 9.6 1400 √√√√√√√ PME278RB5220MR30

0.033 7.6 14.0 24.0 20.3 250 1500 250 4.0 9.6 1000 √√√√√√√ PME278RC5330MR30

0.047 9.0 15.0 24.0 20.3 200 1200 250 5.0 7.5 1000 √√√√√√√ PME278RC5470MR30

0.068 11.3 16.5 24.0 20.3 150 1000 180 7.0 6.2 1000 √√√√√√√ PME278RC5680MR30

0.033 8.0 17.0 27.0 22.5 200 1200 250 5.5 7.2 1000 √√√√√√√ PME278RD5330MR30

0.047 8.0 17.0 27.0 22.5 200 1200 250 5.5 6.0 1000 √√√√√√√ PME278RD5470MR30

0.068 10.0 19.0 27.0 22.5 150 1000 200 7.5 4.8 1000 √√√√√√√ PME278RD5680MR30

0.10 12.0 22.0 27.0 22.5 100 800 180 10.0 3.6 600 √√√√√√√ PME278RD6100MR30

dU/dt Article code

O

SNDFIVDE

SEV

IMQ

0.10 12.1 19.0 30.5 25.4 100 800 10.0 3.9 600 √√√√√√√ PME278RE6100MR30

0.15 15.3 22.0 30.5 25.4 75 600 15.0 3.2 600 √√√√√√√ PME278RE6150MR30

APPROVALS/REFERENCE DOCUMENTS

Certification Body Specification Approval reference

• RIFA

MARKING

• RIFA article code
S EN 132400 9516076
N EN 132400 P95101829
D EN 132400 303938
Fl EN 132400 182572-01
VDE EN 132400 89760
SEV EN 132400 95.7 70725
IMQ EN 132400 V4070

• Rated capacitance

• Rated voltage

• X1

• SH, for self healing

• Climatic category according to

IEC 60068-1, appendix A

• Passive flammability class

• Approval marks

• Manufacturing code (year, month)

ORDERING INFORMATION

The article code for the standard part is given in the article table.
For other options, see page 21.

Capacitors in standard design (lead length
30 mm) and with L < 24 mm and lead length

PACKING

5 or 6 mm are packed bulk in a box with
dimensions 245 x 145 x 80 mm. Quantity/
package as per article table.

Capacitors with L ≥ 24 mm and lead length 5
or 6 mm are packed on trays piled in a box
with dimensions 300 x 260 x 195 mm.
Quantity/package as per article table.

Reels with taped capacitors are packed 10
in a box with dimension 370 x 370 x 560 mm.
The standard quantity/reel is for 360 mm
reel. If 500 mm reel is required, it must be
specified when ordering and the quantity is
2 x the given quantity.

169