WK29B / WK29W
Bluetooth Wireless
Slim Keyboard
User manual ( 2 – 5 )
Uživatelský manuál ( 6 – 10)
Užívateľský manuál (11 – 15)
2
1. Installing the batteries
The EVOLVEO WK29B / WK29W keyboard
uses two AAA alkaline batteries.
1) Remove the battery compartment
cover on the bottom of the keyboard
by squeezing the cover in from the
tab to release it.
2) Insert the batteries as shown inside
the battery compartment.
3) Replace the cover.
2. Hotkeys on the keyboard
System keys
FN+F1 (IOS)
FN+F2 (Android)
FX+F3 (Windows)
ESC
ESC
ESC
ESC
F1
Ejest
Ejest
F1
F2
Search
Search
F2
F3
Screen Save
Screen Save
F3
F4
Black Screen
Black Screen
F4
F5
Screen Lock
-
F5
F6
Mail
-
F6
F7
Previous Track
Previous Track
F7
F8
Play/Pause
Play/Pause
F8
F9
Next Track
Next Track
F9
F10
Volume Down
Volume Down
F10
F11
Mute
Mute
F11
F12
Volume UP
Volume UP
F12
PrtScr
PrtScr SysRq
PrtScr SysRq
PrtScr
Insert
Main Page
-
Insert
Press FN+F1 into iOS (iPad, iPhone) operation system
Press FN+F2 into Andriod (Samsumg Galaxy products) operation system
Press FN+F3 into Windows operation system
3
Installing the bluetooth wireless keyboard
1. Installing the Bluetooth wireless keyboard into your computer
1) before using the Bluetooth keyboard with your computer, You
need to check whether your computer is equipped with Bluetooth
receiver, If not, you will need to purchase an additional Bluetooth
receiver and install it correctly onto your computer, once your
computer is Bluetooth enabled, the setup applet’s icon will
appear in the windows taskbar as shown below:
2) right click on the bluetooth icon in the windows taskbar, and
select add a bluetooth devices
3) Tick the checkbox: My device is set up and ready to be found, and
then click “Next”.
4
4) Your computer will now scan for Bluetooth devices in your area
and display found devices. Meanwhile press “ESC”+“K” About 5
sec. then search the devices;
5) Select the keyboard from the list of found devices and click
“Next” to continue.
6) We re commend our customers to select “Next” to continue.
7) The system will automatically finish the installation after clicking
“Finish” in below window.
5
2. Installing the Bluetooth Wireless Keyboard into Your iPhone/iPad
You will need to manually sync your iPhone/ iPad with the Bluetooth
keyboard before use. No further sync is needed if the first sync runs
successfully. Please follow the instructions detailed below to complete
the sync procedure. Follow the path Settings General Bluetooth on your
iPhone/iPad to enable the Bluetooth function on your iPhone/iPad.
When Bluetooth is turned on, your iPhone/iPad will start searching for
Bluetooth devices automatically. Switch on the Bluetooth keyboard by
pressing the connect button underneath the keyboard. Your keyboard
will be found by your iPhone/iPad automatically. When the keyboard is
found, press the “Bluetooth Keyboard” appearing on the iPhone/iPad
screen, a window will pop up with a syncing passkey. Type in the
passkey shown given by the iPhone/iPad on the keyboard and then
press the “enter” key. Now the Bluetooth keyboard should be
connected to your iPhone/iPad as shown in below picture.
Other Considerations
1) Power-saving design: When the keyboard does not take any action
about 2 seconds into hibernation, press any KEY or touch screen wake.
2) When you press the FN + F11, the keypad keys do not output the value
of users to leave after the others in order to prevent false triggering．
3) 2 AAA dry batteries: the whole boost to 3.0V. The whole system is 3.0V
system．
Loading...