Evolveo SportLife MG8 User Manual

SportLife MG8

www.evolveo.com

Dear customer,
thank you for choosing the EVOLVEO SportLife MG8.
We believe they will bring a lot of fun and happiness.

Putting into the operation

• Charge the earphone batteries fully via

a microUSB cable connected to the USB
port on your computer or the 230 V charger
that you use for your mobile phone (5V / 0.5
~ 1A). The LED will shine steadily red during
charging and it will turn blue when charging
is done.

• Make sure the earphones are fully charged

and then turn them on by holding the centre

button for 2 seconds. You will hear the
"Power On" voice message and the LED will
flash blue.

Pairing (connection with the device)

• press and hold the button for 4 seconds

when the earphones are off (the LED will
flash blue and red and you will hear a
"pairing" voice notice).

• Activate the Bluetooth function in your

phone and select EVOLVEO SportLife MG8
from the available list.

• After pairing with your phone, you will hear

the "Your device is connected" voice
message and you can start listening to
music.

• If there is no sound, increase the volume

level on your phone and earphones.

• If you do not see your earphones in the

device list, make sure they are in pairing
mode and your mobile phone is visible to
the surrounding Bluetooth devices.

• If a PIN code is required, enter the code

"0000".

Control functions

• Turning off: press and hold the button

for
3 seconds; you will hear a "power off" voice
notice and the LED will flash red

• Play/pause: press the button to

play/pause music

• Increase/Decrease the volume: press +/- on

the earphones.

• Next/Previous: press and hold "+" or "-" on