We wish you many happy moments with your EV 3000i!
From the whole team at E V International Ltd.
Content
Theme
Introduction
Scope of supply
Safety regulation
Technical data
Before putting into operation
Filling with water
Placing the steam hose
Connecting attachments
Display
Attachments
Turning on
Directions
Ironing
Air freshener
Cleaning and maintenance
Page
2
3
4
6
7
7
8
8
8
9
10
11
22
24
25
Legal aspects
Accessories for EV 3000i
Maintenance
26
28
Introduction
Your EV 3000i is a result of longtime experience and
extensive technological research.
We have created EV 3000i for you as a perfect device
and have equipped it with professional accessories.
We firmly believe that you will be happy with our product
for many years. For proper operation of EV 3000i please
read this user guide.
150 °C - 170 °C (305 °F - 340 °F) hot, dry steam means:
▹dissolving fats;
▹disinfection;▹bacterial eradication;
▹odor neutralization;
▹human health and environment protection from
chemicals.
But above all it is easier, faster, better and more ecological
way of cleaning!
Having EV 3000i means that you have purchased an
appliance that can be handled quickly and efficiently.
EV 3000i is designed for home cleaning with dry steam.
The steam and high temperature easily remove troubling
stains, hard water spots, stubborn dirt, grease etc.
Important!
Dear customers of E V International Ltd., please keep
the ORIGINAL PACKAGING.
Claims for guarantee repairs can be accepted only in
this PACKAGING.
Thanks to the three-tier steam control EV 3000i can be
used for gentle cleaning of all types of surfaces.
2
For devices that are not sent in the ORIGINAL PACKAGING
the company is not liable for possible damage during
transportation.
Scope of supply
The supply provides you with the following
accessories:
1. Steam hose
2. Universal brush
3. Triangular brush
4. Point nozzle
5. Extension pipes
6. Plunger - Drain opener
7. Round copper brush
8. Round plastic brush /small/
9. Round plastic brush /large/
10. Round horse hair brush
11. Round steel brush
12. Bottle for filling
13. Universal brush mat
14. Triangular brush mat
15. Boiler key
16
2
3
4
5
11
7
8
9
1015
12
13
14
You can see additional accessories or spare parts on page 28.
3
Safety regulations
Strict compliance with the instructions and maintenance
recommendations is at the basis of the intended
conditions of use. In improper use or non-compliance
with the operation instructions any kind of warranties are
terminated.
Before putting into operation
Unpacking the appliance
Once you have removed the device from the package,
check it for any obvious damage. If you have any
doubts do not use the appliance and contact your
service center.
Save the packaging by all means because the device
is accepted for repairs only with its original packaging.
▹ The appliance must be used only for the purpose for
which it is intended.
▹ Prior to using the appliance read completely and
carefully this User Guide.
▹ Any use of the appliance contrary to the instructions
in this User Guide will void the warranty.
▹ The electrical equipment to which this device will be
connected must meet the valid safety instructions.
▹ Do not use the appliance in extreme temperatures.
The ambient temperature should range between +5 °C
and +40 °C (40 °F and 105 °F).
▹ Before connecting the appliance to the electricity
network, make sure that the contact is safe enough
and grounded. You can see the power consumption
of the appliance on the manufacturing plate on the
bottom of the appliance.
▹ Do not leave the appliance unattended. Even in
brief work breaks pull out the plug from the socket.
▹ Before starting any kind of work on the device pull
out the plug from the socket.
▹ Do not pull out the plug from the socket by pulling
the cord of the appliance.
▹ Protect the power cord from twisting, damage
or passing over sharp edges. Keep it away from heat
sources.
▹ Do not use the appliance if the power cord or the
appliance itself is damaged.
▹ Do not use an extension cord without a control sign
and do not use cable reels in any case.
▹ If you need to change your power cord, contact
your service.
▹ The device is equipped with a thermal switch
protection that can be activated or changed only by
E V International Ltd. Company authorized service center.
▹ If the device is damaged or it does not function
properly it must be immediately turned off. Avoid any
interventions.
▹ For any kind of repairs, contact E V International Ltd.
or your supplier.
▹ If the power cord of the device is damaged it should
be immediately changed by the manufacturer or an
authorized service center.
4
Safety regulations
▹ Never use the appliance with wet hands or feet.▹ Do not use the appliance within walking distance of
sinks, tubs, showers or water reservoirs.
▹ Do not immerse the appliance, its cord or plug in
water or other liquids.
▹ In case of danger of explosion using the appliance
is forbidden.
▹ Do not use the appliance within walking distance of
toxic substances.
▹ Do not use the appliance on heat-sensitive surfaces
or objects.
▹ Do not expose the appliance to the impact of
weather conditions.
▹ Do not place the appliance near working heaters,
electric heaters or near heat sources.
▹ Electric devices such as televisions, radios, lamps,
etc. should not be cleaned with steam, even when they
are not connected to electricity network.
▹ Do not allow the appliance to be operated by children.▹ Do not use excessive force or sharp objects to press
the button.
▹ Always place the appliance on a stable ground.▹ If the appliance is dropped from height and/or
damaged, do not use it and contact your supplier.
▹ In case of damage turn off the appliance and never
attempt to repair it by yourself. Contact your service.
▹ During repairs use only genuine parts.▹ Always keep the appliance in horizontal position.▹ Do not direct the steam jet in or towards electrical
appliances.
▹ Before cleaning the appliance always pull out the
plug from the socket.
▹ Always wait the appliance to cool down before
storing.
▹ Please empty the boiler if the appliance is not used
more than three weeks.
▹ This appliance is available with several safety systems
that can be changed only by an authorized service.
▹ Never direct the steam jet at people or animals.▹ Never place your hand in front of the steam jet.▹ Never pour abstergents or other additives in the tank
for steam generation. Use only tap water.
▹ This appliance is not suitable for use by persons
(including children) with reduced physical, sensory
or mental disabilities or who have no experience or
knowledge of the use of the device.
▹ Make sure children never play with the appliance.▹ This machine cannot be used for more than 3 hours
continuously.
▹ Not for Space heating purposes.
5
Technical data - EV 3000i
▹ Power supply▹ Max. total working power▹ Max. boiler power▹ Max. iron power▹ Boiler capacity▹ Capacity of the refilling tank▹ Maximum pressure▹ Test pressure▹ Weight▹ Steam control▹ Size▹ Corps
Protective devices:
▹ Overpressure valve;▹ Protection class IP 24;▹ Electronic control of the heating power;▹ Electronic control of the water level in the boiler;▹ Electronic control of the water level in the
refilling tank;
▹ Electronic control of the voltage in the
appliance socket;
▹ Automatic control of the functions for each
connection;
▹ Thermostat with automatic recharge;▹ Thermostat “One-shot”.
220 - 240 V - 50/60 Hz
2850 W
2000 W
850 W
2.2 I (0.58 gal)
2.1 l (0.55 gal)
8 bar
10 bar
6,5 kg (14lb)
Electronic
410 x 297 x 250 (16 x 12 x 10 in)
100% AISI 304 INOX- Stainless steel
(lifetime warranty against rust)
* Maximum pressure is the pressure at which the safety valve is activated at the latest.
It does not correspond to the operating pressure.
6
Before putting into operation
Description of the appliance
and an explanation of the figures
1. Screw cap of boiler
2. Tank
3. Main switch (device) boiler on / off
4. Display
4.1 Shortage of water: H2O appears on the
display + acoustical signal
4.2 Steam is ready: 170 °С (340 °F) appears
on the display
5. Power cord winder
6. Contact socket
7. Tank cap
1. Filling EV 3000i with water
Before inserting the plug info the outlet, make sure that
the boiler cap (1) is screwed completely.
Fill the tank (2) with 2 L (0.52 gal) tap water.
Press the main switch (3) to turn on the EV 3000i.
Now the appliance pumps the water into the boiler.
7
2
4/ 4.1/ 4.2
5
3
16
In case of water shortage steam output is interrupted so
that the boiler under pressure is off and not idle.
If EV 3000i needs water, remove tank cap (7) and fill up
the tank (2) with the plastic bottle.
The appliance is equipped with a warning acoustical
signal that indicates when cold water must be poured
into the tank (2). Shortage of water: When in shortage of
water: H2O appears on the display (4).
Never pour detergents, anti-scale additives, essences or
distilled water into the tank (2)!
Doing so would result in serious damage to the water
circulation system and heating element.
7
Connecting attachments
2. Inserting the steam hose into EV 3000i
The protective cover of the contact socket (6) is opened
up. Now you have to insert the plug of the steam hose
into the socket. Now, the hose is connected to the
appliance.
To remove the steam hose open the lid of the contact
socket (6) and pull out the hose.
3. Connection of accessories for EV 3000i
Insert the appropriate accessory into the hose or pipe
until it locks.
To remove the accessories, press the black button and
pull out the accessory.
4. Display for EV 3000i
Main switch (device) boiler on / off
Switch on the appliance by pressing the main switch (3),
now the boiler is turned on.
Now the appliance pumps water into the boiler.
The appliance needs about 3-5 minutes to convert the
water into dry vapor. Once it reaches operating pressure,
this appears on the display (4). In this way, the appliance
signals that it is ready for use.
8
Attachments
AB
Firmly press the stainless steel sponge to the big
round brush.
Activation of the cleaning with hot water (A). You can
chose the steam level by pressing button (B).
NO STEAM, EV1, EV2, EV3
Triangular brush + Universal brush + Thermofiber = Universal and triangular brush with thermofiber.
The brush mat provides moisture reduction and temperature accumulation.
9
Turning on
The appliance must be filled with water.
Now activate the main switch (3); Boiler on appears on
the display (4), the appliance signals that it is ready for
use.
Now connect the steam hose.
The appliance has a three-tier steam control.
You can regulate the steam
level by pressing button (B).
B
NO STEAM, EV1, EV2, EV3.
Your appliance EV 3000i except dry steam function
has also a function for hot water under high pressure.
For activation of this function you should press and
hold button (A). Use the hot water function with EV2 or
EV3 steam position. Now the hot water function is at
your disposal. It helps to remove dissolved impurities.
Especially the guide rails of showers and overflow of sinks
and basins. This function is also applicable for cleaning
your garden furniture, etc.
Note that this function is only intended for short-time work.
The hoses into the unit and the steam hose are cold,
therefore you need to release the condensation from
the hoses by releasing steam at full power for 10 seconds.
Please wait until the temperature reaches again about
170 °C (340 °F).
After you have finished the cleaning, switch off the
appliance from the main switch (3).
Now pull the plug from the outlet and curl it around the
place for winding the power cord (5).
C
10
You can activate and
deactivate the steam jet
by pressing button (C).
Before storing the appliance, it must be cooled about
30 minutes (at room temperature).
Directions
UseAccessoriesAmount of steam
Absorbers
Depositions of fats are
difficult to remove.
Armature
Limestone is easily
deposited on armature
and often it is very difficult
to remove.
Garden furniture
Garden furniture gets
very dirty particularly from
insects and lichens.
Use the point nozzle to clean the grease from the filters. Clean
the absorber from the outside depending on the access
opportunities. For this purpose you can use the triangular
brush with thermofiber cloth stretched on it.
Use the point nozzle and small round copper brush (for
sensitive surfaces) or of stainless steel. For deposits of limestone
help yourself with a mild pressure of the brush. Deposited with
years limestone cannot be removed immediately. Clean the
armature regularly.
Use the point nozzle with the attachment-brush. For cleaning
wooden furniture choose less steam than for plastic or metal
furniture.
Medium, large
amount of steam
Small, medium, large
amount of steam
This way you save on
purchasing spare parts
and you no longer need
chemicals.
Small, medium
amount of steam
You will be amazed how
much dirt is dissolved.
For cleaning sensitive garden furniture (e.g. wood) use only
the horsehair brush.
11
Directions
UseAccessoriesAmount of steam
Shower cabin
If there are significant
limestone deposits on glass
doors we recommend
using some vinegar
for dissolution of the
limestone. Let it work for
approximately
30 minutes.
Wooden furniture
Wooden furniture and
wooden ceilings are very
sensitive. Please clean very
carefully.
For joints and chutes use the point nozzle with round brush with
maximum amount of steam. Clean the rubber seals with less
steam.
Treat the wooden kitchen with the point nozzle with less
steam from distance of about 15 cm (5 in). For especially
sensitive material wipe with a thermofiber cloth soaked with
steam. The cleaning is not carried out very quickly, but it is
very gentle. For sealed wooden ceilings use universal brush
and thermofiber cloth.
Medium, large
amount of steam
For rubber seals, glass,
joints and plastic surfaces
there are numerous
possibilities for use.
Small amount of steam
Clean the surface quickly.
Do not hold the steam jet
at one point. Just a small
amount of steam.
Ceramic hot plates /
ovens
Fast and effective
cleaning of burned fats
on the ceramic plates.
12
For stubborn stains on ceramic plates or in the oven (not of
stainless steel) use large round brush with stainless steel wool.
Then use the point nozzle and scrub with thermofiber.
Medium
amount of steam
Thus you save on
purchasing spare parts
and you no longer need
chemicals.
Directions
UseAccessoriesAmount of steam
Animal cages
Baskets for dogs and cats,
cages for birds, cages for
hamsters and more.
Cork
Cork can be treated with
oil, wax or if it is sealed.
Treated with oil or wax cork
coatings can be cleaned
with steam. Sealed cork
floors can be cleaned
perfectly with steam.
lean the cages with the nozzle point and attached small or
large round brush.
Place the thermofiber on the universal brush and clean with
a small amount of steam. Be careful not much moisture to be
soaked in the cork. Slide evenly and quickly on the surface,
and do not hold at one place. In case of spots better do it a
few times.
Small, medium
amount of steam
For removal of old and
stubborn stains you must
repeat the procedure.
With the steam you
will achieve very good
disinfection.
Small amount of steam
Use only small amount of
steam.
Plates of cooking
stoves
Dried fats and stains from
sauce and water always
have to be removed from
the cooking stove plates.
Release steam with the point nozzle on a thermofiber towel
and rub with it the stove plate. For stubborn stains, you can
use the stainless steel sponge and the big round plastic brush.
Medium
amount of steam
You may need to repeat
the operation in case of
burned residue.
13
Directions
UseAccessoriesAmount of steam
Varnished surfaces
Varnished surfaces are
cleaned very well.
Linoleum
Ideal material for cleaning
with steam.
Mattresses
The mattresses can be
cleaned very well with
steam. Here they benefit
from the natural freshness
of steam cleaning. As
a result of the outflow
of fluids mattresses start
smelling unpleasantly and
do not produce sensation
of freshness.
Treat the surfaces with a small amount of steam at 10-15 cm./
(3-5 in) distance. Then wipe it with the thermofiber. You will get
shiny lacquered surfaces without lines.
In case of heavy soiled areas select medium amount of
steam. Along with normal dirt here it is also valid that the less
amount of steam, the faster dries the cleaned surface.
Treat the front and the back of the mattress with the universal
brush. Select a small amount of steam. In case of spots you
can briefly choose an average amount of steam. Replace
the strained thermofiber before the absorbed moisture to
be soaked by the mattress. After cleaning ensure enough
ventilation in the room to help the mattress get dry.
Small amount of steam
Clean the surface quickly.
Do not hold the steam jet
at one point. Use only
small amount of steam.
Small, medium
amount of steam
Repeat the cleaning
process to remove the
residual quantities of
detergents.
Small amount of steam
Cleaning with steam kills
mites. This is another
plus for people allergic to
dust mites.
14
Directions
UseAccessoriesAmount of steam
Metal
Stainless steel, anodized
aluminum, perforated
sheet, brass and others.
Carpets
You can clean and
maintain carpets and
moquettes without causing
any damage. There are
materials such as synthetic
that can be cleaned
smoothly.
Other materials are more
or less sensitive.
Depending on the size of the surface choose the point nozzle
or the triangular brush (then polish with the thermofiber) or the
triangular brush with thermofiber strained on it.
Suction the dust from the entire area before steam cleaning.
Check the resistance of colors and the adhesion by doing a
test cleaning on small hidden place. After assessing the result
and making sure that it is good, continue with the cleaning
process. First treat the stains with a point nozzle with steam
under obtuse angle (without touching the tip of the nozzle
to the carpet) and mop up the separate spots with a towel.
Then clean with a small amount of steam and with the
universal brush.
Small, medium
amount of steam
Use small amount of steam
not to wet the metal too
much.
Small, medium
amount of steam
If you are allergic to dust
mite or you have pets, the
carpets should be cleaned
more often.
This way you remove the
mites and pet hair.
15
Directions
UseAccessoriesAmount of steam
Parquet and floor
laminate
For parquet floors different
types of wood is used, such
as beech, oak, maple, ash,
birch and many others.
Solid wood or finished
parquet can be cleaned
smoothly with steam if
sealing is not damaged.
Plastic
Plastics can be found in
the whole household.
Worktops, PVC flooring,
kitchen cupboards,
lampshades and more.
For cleaning parquet flooring use the universal brush with
stretched thermofiber on it. Clean with a small or medium
amount of steam. Slide evenly on the surface.
Replace the thermofiber on time before the moisture soak
into the floor.
Question: Does the steam really cause no damage to the
flooring?
Answer: When used properly - Yes!
EV 3000i is characterized with extremely dry steam. Only the
wet steam could carry the temperature too fast and so it
would damage the surface.
(In a sauna we can stand at 90 °C (194 °F), as normal bathing
at the same temperature would be impossible).
Therefore you use much less moisture than with wet wiping.
Your parquet flooring shines and you can immediately
re-tread on it.
For lower soiled areas clean with a little amount of steam, so
that the surface can dry faster. For heavily soiled areas you
can easily clean with medium amount of steam. Plastic is very
durable. You can choose from the accessories depending on
the surface size.
Small, medium
amount of steam
Small, medium, large
amount of steam
With this hygienic
procedure you can clean
mostly working surfaces in
the kitchen.
16
Directions
UseAccessoriesAmount of steam
Radiators
There are smooth and
ribbed radiators.
Window frames
Profiles, drainage grooves
and gaps are cleaned
very difficult with common
means and that takes too
much time.
Plants
Special green plants
and dry plants.
Clean smooth radiators with the triangular brush with
thermofiber strained on it. Then take down the upper grid and
clean the radiator with steam from above.
Ribbed radiators and their intermediate spaces are cleaned
with the point nozzle. The dust moistens and falls down.
For cleaning profiles use the point nozzle with or without a
brush attachment. Dissolve the dirt with a little steam and the
inaccessible places and then rub with thermofiber.
Place a towel under the plant to absorb dust and moisture.
Treat the plant with average steam with point nozzle from a
distance.
Small, medium, large
amount of steam
Put behind and under the
radiator an old cloth. Dust
is collected even better
with dust gauze.
Small, medium
amount of steam
For wooden profiles
process with just a small
amount of steam.
Small, medium
amount of steam
No more complex
watering with shower
for the flowers in the tub
or in the garden.
17
Directions
UseAccessoriesAmount of steam
Rattan
Cleaning the dust from
rattan furniture and knitted
armchairs is difficult.
Sanitary spaces
Bathtubs, bidets, shower
trays, toilets, sinks and
more.
Siphons
Cleaning the drain of
showers, bathrooms
and kitchens without
heavy dismantling of the
siphon and without any
chemicals.
Treat knitted furniture with the point nozzle and little steam
and then wipe with thermofiber.
Clean larger surfaces with the large rounded brush. Use the
point nozzle for the corners with or without attached brush.
For cleaning plastic sinks and tubs use a horsehair brush.
Keep the point nozzle or the nozzle for cleaning siphons over
the siphon. Then rinse with clean water.
Small, medium, large
amount of steam
Keep a cloth behind
the braid to absorb the
deposited dust.
Small amount of steam
Thanks to steam
cleaning your sanitary
ceramics will acquire
mirror-smooth glare.
Large amount of steam
Quickly and without any
chemicals.
18
Directions
UseAccessoriesAmount of steam
Car windows
During rain deposition of
silicone and dirt causes the
formation of lines. The result
is poor visibility.
Glass
Upholstery
Upholstery is made
from a variety of materials
such as dralon, viscose,
cotton, blended fabric,
leather and more.
Moreover it depends
whether or not the material
fades. Here in general
applies the following:
perform a test cleaning.
Clean a small
surface, and then let it dry.
Use the point nozzle and then rub with thermofiber. Keep a
distance of minimum 2 cm (1 in) to the multilayer safety glass
(e.g. car windscreens).
The more dirt on the glass, the less distance between the
point nozzle and the surface you need. Short distance means
better cleaning with high temperature. Yet avoid direct
contact of the surface with the point nozzle. Dissolve the
stubborn dirt with the horsehair brush.
Dralon and other non-sensitive materials for upholstery you
can clean directly with the triangular brush and thermofiber
strained on it. Treat cotton, blended fabrics, etc., from
distance of about 15 cm (5 in). And then wipe with thermofiber
the surface treated with steam.
Medium
amount of steam
Clean windows are safe
windows.
Small amount of steam
Optional: you can clean
glass surfaces with the
universal brush and
thermofiber.
Small, medium, large
amount of steam
Clean your upholstery
regularly and the refreshed
colors will look amazing.
19
Directions
Use
Car upholstery
Different materials are
used for car upholstery. So
please do a test cleaning
on a hidden place
(for example on the
bottom).
Toilets
Hinges of glasses, toilet
edges and inaccessible
corners.
AccessoriesAmount of steam
Always watch out for having sufficient distance to the material.
For cleaning the edges of toilets use the point nozzle with or
without a brush. Repeated cleaning removes the yellowing
spots of urine. Meanwhile, run the water from the toilet
to wash out the different dirty areas. Keep a towel behind
the hinge, respectively behind the rakers of the toilet and
clean with the point nozzle at full steam. Disinfection of the
nozzle after cleaning the toilet is achieved through its steam
treatment with the steam hose.
Small amount of steam
Move the triangular brush
several times briefly over
the surfaces. Regular
maintenance leads to
long-term result.
Small, Medium, Large
amount of steam
20
Directions
Use
Tiles / joints
There are many different
types of tiles. Almost each
tile can be cleaned very
well with your EV 3000i.
Sensitive surfaces
AccessoriesAmount of steam
Clean your tiles with the universal brush with strained
thermofiber. Select a small amount of steam, so tiles can
dry faster. For stubborn stains you can process with a large
amount of steam and a plastic brush.
For cleaning sensitive surfaces a test clean on a hidden place
is recommended. Always watch out for having sufficient
distance to the surface. Horsehair brush is particularly suitable
for dirt removal of surfaces that are sensitive to thermal
treatment. At the end rub the surfaces with thermofiber.
Small, medium
amount of steam
Now without much efforts
you can make the steam
works. You will be amazed
how easy it is.
Small, medium
amount of steam
After a short exercise you
will be delighted from
the result of this type of
cleaning. Have in mind
processing with less steam.
Blinds
Clean efficiently blinds in
rooms and outside.
Small amount of steam
If you press too much, you can bend the blinds, so clean
them carefully!
Clean outer shutters with universal brush with thermofiber
from the outside.
21
Ironing
Instructions
Before using the iron must be connected to EV 3000i.
Before using the iron read the instructions.
Do not leave the iron unattended while connected to
the appliance. Always leave the iron on the supplied
stand.
The iron mat can be damaged if the hot iron is placed
on another surface. Improper surfaces can be damaged or burn.
C
A
Description
The iron is equipped with the following features:
(A) Steam button
(B) Rotating button for fabric selection
(temperature control)
(C) The iron is connected with the EV 3000i
device through the connecting cable
Accessories
The iron is equipped with the following accessories:
(D) Rubber mat
C
22
В
D
Assemble the accessories as shown in the figure.
Ironing
Connecting and turning on
In order to facilitate your work, we recommend always
using the Teflon mat. In any case you have to take in
mind that here you must always use higher temperature.
Connect the iron through the connecting cable (C) with
EV 3000i and turn on the appliance. Adjust the rotary
switch position according to the fabric to be ironed.
Synthetic / silk
Wool
Cotton
Steam ironing
Press (A) button to get steam.
Steam ironing is possible when the
regulation button is at wool
or cotton-linen .
Vertical ironing
Steam output is independent of the iron
slope. Therefore, the steam can be used
for refreshment of curtains, clothing and
fabric upholstery by vertical ironing.
Dry ironing
The heat iron operation does not de-
pend on the condition of the heating
boiler, so you can iron without steam.
Vertical position
During ironing you can leave the iron in
vertical position (see figure).
23
ON/OFF
Fig. 1
Air Freshener
24
Air freshener use (option)
Before using the air freshener wait until the machine
heats up to operating temperature. Connect it to the
appliance as shown in Fig. 1. Note that the air freshener
does not start automatically. Please press the ON/OFF
button to activate and deactivate the air freshener.
Cleaning and maintenance
Always pull out the plug before cleaning and mainte-
nance of the appliance.
The following operations must be carried out by compe-
tent and trained professionals!
In any case, it is best to contact our authorized service.
Removal of scale deposits in the steam
generator
Depending on the hardness of the tap water the
machine must be cleaned of limestone deposits every
4 to 6 months. Proceed as follows:
▹ Pull out the plug from the socket;▹ Wait until the EV 3000i is cold;▹ Unscrew boiler cap (1) by using the boiler key
included in the supply and pour the water out from
the boiler;
▹ Put 2 cups of fluid for maintenance in the steam
boiler (use fluid for maintenance provided by our
service. Fluid for maintenance would be charged);
▹ Close the boiler again by using the screw. Watch if
the screw seal lies in correct position;
▹ Heat the appliance and after indication of the
steam readiness disconnect the appliance from the
electrical outlet;
▹ After complete cooling of the appliance reopen
the screw gate of boiler (1) and pour out the water;
▹ Close the boiler again using the screw. Watch if the
screw seal lies in correct position;
▹ Finished.
▹ Do not use any chemicals for cleaning of scale,
either in normal operation;
▹ Carrying out routine checks of inclusion items and
electronics of the device by the employees of
our service prolong significantly the lifetime of the
device;
▹ These checks are charged by the supplier.
25
Legal aspects
This user guide contains the information necessary
for correct use, proper handling and skilled technical
support of the machine.
Knowledge of and compliance with this guide is a
condition for safe operation and safe maintenance of
the machine.
Of course, this user guide cannot contain all possibilities
for use.
If you need more information or have more questions,
not be discarded. In order to remove them as waste
contact public points for processing and recycling or
the supplier.
According to Art.13 of the Law enforcement No 151 of
July 25, 2005 Implementation of Directives 2002/95 /EU,
2002/96/EU and 2003/108/EU for reduction of the use
of hazardous substances in electrical and electronic
equipment and removal of waste.
Crossed bin symbol on the appliance means that at the
end of its use, the product should be removed separately
from the other waste.
You’ll have to hand over the device, that will no longer
be used in the centers suitable for separate collection of
electrical and electronic waste or to return it in the shop
in case of buying a new appliance of this type.
Proper separation of instruments that undergo recycling,
preparation and disposal as waste, which does not
harm the environment, helps to avoid possible negative
environmental impacts and health. It also favors the
reuse of materials from which the device is made.
Unlawful removal of the product as waste by the user is
punished by criminal law enforcement measures under
Law enforcement 22/1997 (Art. 50 and following of the
Law enforcement No 22/1997).
26
Legal aspects
General Vapeur Ltd. Company, Strada per Castelletto 19-21, 20080 Albairate (MI), declares on own responsibility
that the device referred to in this declaration of conformity complies with the following safety requirements laid
down in the Directives for the CE marking:
ELECTRICAL SAFETY AND EMC
▹CEI EN 60335-1 + A13 ▹CEІ EN 60335-2.2 EM + A2▹CEІ EN 60335-2-54