EVGA 100-EV-EB01 User Manual

Tables of Contents

1. Overview .................................................................................. 2

a. Introduction ............................................................................................................................................................... 2

b. Function Keys ............................................................................................................................................................. 3

c. Connections ............................................................................................................................................................... 4

2. Updating Firmware ................................................................ 10

a. Updating in DOS ....................................................................................................................................................... 10

b. Updating in Windows ............................................................................................................................................... 10

3. Using the EVBot ..................................................................... 12

1. Overview

a. Introduction

The EVGA EVBot is a fun and useful tool for tweakers and overclockers to have fun tweaking their EVGA products for

benchmarking World Records and overclocking fun.

It’s use is very simple and straightforward much like your mobile hand-phone. The beauty of it is that you do not need

any software nor does it eat any system resources.

b. Function Keys

OK: Enter

C: Cancel/Backspace

Up: Scroll Upwards/Increase one notch

Down: Scroll downwards/decrease one notch

1,2,3,4: Profile Hotkeys

Power Button: Press once to turn power off/on for EVBot, Hold down to enter Flash Mode (Explained in the Firmware

Flashing section)

Reset Button: Press once to reset EVBot

c. Connections

First Hook up the EVGA EVBot Enabled products to their respective ports on the EVBot. As illustrated, MB Port is for

connecting Motherboard, VGA1, VGA2, VGA3 is for connecting to 3 individual EVGA Video Cards.

You do not need to have all 4 items but any one of those. For example you can just hook up to an EVGA Motherboard if

that is all you have that supports this feature. Or just a Video Card supporting this feature.

Connect the EVBot to the ports on the Motherboard or Video Card. Highlighted in Green is where it is located on below

EVBot enabled models:

EVGA X58 Classified (E759, 760, 761, 769)Motherboard:

EVGA X58 Classified E762 Motherboard

EVGA P55 FTW E657

EVGA P55 FTW 200 E658