EverSewn Maker 200 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT

When using an electrical machine, basic safety precautions should always be followed, including the following: Please read the instruction manual carefully before using this machine. Keep the instruction manual at a suitable place with the machine and hand it over if you give the machine to a third party.

When the machine is not in use or left unattended, always disconnect the machine from the power supply system. Unplug it from the outlet.

DANGER!

To reduce the risk of electric shock:

1. Never leave the machine unattended when it is plugged in.

2. Always unplug this machine from the electric outlet immediately after using and before cleaning.

3. LED RADIATION: Do not view directly with optical instruments Class.

WARNING!

To reduce the risk of burns, fire, electric shock or injury to persons:

1. The machine mustn't be used by children under 8 or by people with reduced physical, sensory or mental capabilities or if there is a lack of experience and knowledge how to operate the machine. Unless they have been given instruction concerning the use of the machine And the involved risks by a person who is responsible for their safety.

2. Do not use this machine as a toy. Close attention is necessary when this machine is used by children, near children or people with reduced sensation.

3. Use this machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer.

4. Children should be supervised to ensure that they do not play with the machine.

5. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the machine to the nearest authorized dealer or service centre for examination, repair, electrical or mechanical adjustment.

6. Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and the foot control free from accumulation of lint, dust, and loose cloth.

7. Keep fingers away from all moving parts. Special care is required around the machine needle.

8. Always use the proper stitch plate. The wrong plate can cause needle breakage.

9. Do not use bent needles.

10. Do not pull or push the fabric while sewing. This can result in needle breakage.

11. Switch the machine off ("O") when making any adjustments in the needle area, such as threading or changing the needle, threading the bobbin, or changing the presser foot, and the like.

12. Always unplug the machine when performing cleaning or maintenance work such as replacing the sewing light or when making any other user maintenance adjustments mentioned in the instruction manual (disconnect the power plug). Cleaning and maintenance work must not be carried out by children without supervision.

13. Never drop or insert any object into any openings.

14. Use this machine only in dry and protected areas. Never operate the machine in a damp or wet environment.

15. Do not operate the machine where aerosol spray products are being used or where oxygen is being administered.

17. If the supply cord of the foot control is damaged, it must be replaced by the manufacturer or an appropriate service agent or a similar qualified person in order to avoid endangerment.

18. Never place anything on the foot control.

19. When replacing the light bulb, always use the same type.

20. The machine may only be used in combination with a foot control of the type 1902 (110-120V area) / KD-2902, FC-2902A, FC-2902C, FC-2902D (220-240V area) / 4C316B (110-125V area) / 4C-316C (127V area) / 4C-326C (220V area) / 4C-326G (230V area) / 4C-336G (220-240V area).

21. The sound pressure level during normal operation is lower than 75dB(A).

22. This machine is provided with double insulation (except U.S.A/Canada). Use only identical replacement parts. See instructions for Servicing of double-insulated products.

KD-1902, FC-

SERVICING OF DOUBLEINSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product nor should a means for grounding be added to the product. Servicing a doubleinsulated product requires extreme care and knowledge of the system and should only be done by qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in the product. A

double insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED".

The symbol may also be marked on the product.

III

SAVE THESE INSTRUCTIONS!

Attention!

- This machine is intended for household use only. If used intensively or commercially, regular cleaning and

especially attentive care is required.

- Signs of wear and tear owing to intensive or commercial use are not covered automatically, even if they occur

within the warranty period. The decision on how to deal with any such cases rests with the local authorised servicing staff.

Note:

If the machine is stored in a cold room, it should be brought to a warm room about one hour before use.

For technical and product improvement reasons, the machine's features, parts and accessory are subject to unannounced changes and alterations at any time. The accessory included can differ from country to country.

Environmental protection

Ever Sewn is committed to the protection of the environment. We strive to minimize the environmental impact of our products by continuously improving product Design and our technology of manufacturing. Do not dispose of electrical machines as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available.

If electrical machines are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

When replacing old machines with new ones, the retailer is legally obligated to take back your old machine for professional disposal free of charge.

Congratulations:

As the owner of a new sewing machine, you will enjoy precision quality stitching

on all types of fabrics, from multiple layers of denim to delicate silks.

Your sewing machine offers the ultimate in simplicity and ease of operation. For

your safety and to fully enjoy the many advantages and ease of operation of your

sewing machine, we recommend that you read all the important safeguards and

use and care instructions in this instruction book.

May we suggest that before you start to use your sewing machine, you discover

the many features and advantages by going through this instruction book, step by

step, while seated at your sewing machine.

List of contents

Details of the machine.............................................................2/3

Accessories ................................................................................4

Fitting the snap-in sewing table..................................................5

Connecting machine to power source ........................................6

Two-step presser foot lifter.........................................................7

Attaching the presser foot holder ...............................................8

Winding the bobbin.....................................................................9

Inserting the bobbin..................................................................10

Inserting the needle (System 130/705H)..................................11

Threading the upper thread......................................................12

Automatic needle threader .......................................................13

Thread tension .........................................................................14

Raising the bobbin thread ........................................................15

Matching needle/ fabric/ thread ................................................16

How to choose your pattern .....................................................17

Stitch width dial & stitch length dial ........................................18

Sewing straight stitch ...............................................................19

Sewing on buttons....................................................................23

Sew 1-step buttonholes............................................................24

Zippers and piping....................................................................25

Sewing with the Hemmer foot ..................................................26

3-step zig-zag...........................................................................27

Stitch selection .........................................................................28

Smocking stitch .......................................................................29

Sewing with the cording foot ....................................................30

Darning.....................................................................................31

Practical stitches ......................................................................32

Quilting .....................................................................................33

Gathering..................................................................................34

Patch work................................................................................35

Applique ...................................................................................36

Twin needle .............................................................37

Monogramming and embroidering with Embroidery hoop*....38/39

The walking foot accessory ......................................40

(optional)

Reverse sewing/ Removing the work/ Cutting the thread ........20

Blind hem/ lingerie stitch ..........................................................21

Overlock stitches ......................................................................22

Maintenance.............................................................................41

Trouble shooting guide.............................................................42

Details of the machine

1. Thread tension dial

2. Thread take-up lever

3. Thread cutter

4. Presser foot

5. Needle plate

6. Sewing table and accessory box

7. Reverse sewing lever

8. Bobbin winder stopper

9. Stitch width dial

10. Stitch length dial

11. Pattern selector dial

12. One step buttonhole lever

13. Automatic threader

Details of the machine

14. Horizontal spool pin

15. Bobbin winder spindle

16. Hole for second spool pin

17. Handwheel

18. Power switch

19. Main plug socket

20. Bobbin thread guide

21. Upper thread guide

22. Face plate

23. Handle

24. Presser foot lifter

25. Foot control

26. Power cord

Accessories

Standard accessories (1)

a. All purpose foot b. Zipper foot c. Buttonhole foot d. Button sewing foot e. Seam ripper/ brush

f. Edge/ quilting guide g. Pack of needles h. Spool holder

i. Bobbin (3x)

j. L-screwdriver k. Oil bottle

l. Darning plate

m. Second spool pin

n. Spool pin felt

Optional accessories (2)

(These 10 accessories are not supplied with this machine; they are however available as special accessories from your local dealer.)

o. Satin stitch foot p. Overcasting foot q. Hemmer foot

r. Cording foot s. Blind hem foot

t. Darning/ embroidery foot u. Gathering foot v. Quilting foot

w. Walking foot

x. Twin needle

Standard accessories

006806008 006905008

m n

Optional accessories

006804008

006016008

006803008

006917008

006Q6A0150

006800008

006916008 006815008

006810008

006914008

006812008

Fitting the snap-in sewing table

Keep the snap-in sewing table horizontal, and push it in the direction of the arrow. (1)

The inside of the snap-in sewing table can be utilized as an accessory box. (2)

Connecting machine to power source

Connect the machine to a power source as illustrated. (1) For appliance is equipped with a polarized plug which must be used with the appropriate polarized outlet. (2)

Attention:

Unplug power cord when machine is not in use.

Foot control

Foot control regulates the sewing speed. (3)

Attention:

Consult a qualified electrician if in doubt as to connect machine to power source. Unplug power cord when machine is not in use.

Sewing light

Press main switch (A) for power and light on. (" l ")

IMPORTANT NOTICE

For appliance with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. (2)

Polarized attachment plug

Conductor ilntended to be grounded

Two-step presser foot lifter

When sewing several layers or thick fabrics, the presser foot can be raised a second stage for easy positioning of the work. (A)

Attaching the presser foot holder

Raise the presser clamp (a) with the presser foot lifter. Attach the presser foot holder (b) as illustrated. (1)

Attaching the presser foot

Lower the presser foot holder (b) using the presser foot lifter, until the cut-out (c) is directly above the pin (d). (2) The presser foot (f) will engage automatically.

Removing the presser foot

Raise the presser foot using the presser foot lifter. (3) Raise the lever (e) and the foot disengages.

Attaching the edge/ quilting guide

Attach the edge/ quilting guide (g) in the slot as illustrated. Adjust as needed for hems, pleats, quilting, etc. (4)

Attention:

Turn power switch to off ("O") when carrying out any of the above operations!

Winding the bobbin

- Place thread and corresponding spool holder onto spool pin. (1/2)

- Snap thread into thread guide. (3)

- Wind thread clockwise around bobbin winder tension discs. (4)

- Thread bobbin as illustrated and place on spindle. (5)

- Push bobbin winder spindle to right. (6)

- Hold thread end. (7)

- Step on foot control. (8)

- Cut thread. (9)

- Push bobbin winder spindle to left (10) and remove.

Please Note:

When the bobbin winder spindle is in "bobbin winding" position, the machine will not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the left (sewing position).

+ 36 hidden pages