Everpure WS-45 User Manual

BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
EV9980-10
WS-Series
Water Conditioning for Commercial and Light Industrial Applications Available in Single Tank System with 1" Porting
Hardness removal of 30,000 to 45,000grains at flow rates up to 12 gallons per minute continuous
Meter initiated regeneration minimizes salt, water and electrical costs
Advanced user-friendly controls incorporates time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
Large capacity brine tank maximizes time between refills
Fiberglass reinforced resin vessels with NSF approved polyethylene liners eliminate worries about corrosion
Single tank design for simplicity, economy and space savings
5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
Locate equipment on a smooth, level surface
Maintain an air-gap at the end of the drain line
Secure drain line directly over floor drain or stand pipe
When connecting a water heater, install a check valve on the soft water piping to prevent hot water back-up
When sweating/installing copper piping, protect the control valve from excessive heat
Check local codes for additional equipment that may be required, such as backflow prevention devices (I.e., RPZ)
Check for softened water each time salt is added, by using soap of hardness test kit
Use a good quality grade of salt - Solar or pellet are preferred
Check the salt level on a regular basis
Maintain a minimum Salt depth of 6" to ensure a proper regeneration
On iron bearing waters, use a salt that contains an iron "fighting" additive, or use a resin cleaner on a regular basis
Check the water level in the brine tank. If abnormally high - refer to IO guide for troubleshooting information
Reverse Osmosis Pre-treatment
Espresso Machines
Warewashing
Laundry-Linen & Uniform
Boiler Scale Control
Water Heater Scale Protection/Reduction
General Housekeeping
WS-30 WS-45
WS-Series
WS Series
Everpure water treatment systems (excluding replaceable elements) are covered by a limited warranty against defects in material and workmanship for a period of five years after date of purchase. Everpure replaceable elements (filter cartridges and water treatment cartridges) are covered by a limited warranty against defects in material and workmanship for a period of one year after date of purchase. See printed warranty for details. Everpure will provide a copy of the warranty upon request.
Loading...