Everpure SPA-400 User Manual

SPA-400

Commercial grade drinking water system

for the home spa and bath

The same commercial quality that makes Everpure® the overwhelming choice for water filtration in restaurants is now available for your entire home, including the home spa and bathroom. Everpure’s SPA-400 addresses the issues associated with water quality in the bathroom by reducing unwanted lead, particulate and chemical impurities and retaining healthful minerals such as flouride, making it the perfect water source for teeth brushing and a healthy mouth. The SPA-400 is designed to connect to your existing lavatory faucet, so bringing the convenience of filtered water to your master bath, children’s or guest bathroom is easier than ever.

It’s water filtration you can trust

*As tested by Everpure, LLC

the pure solution

Our products polish water to premium quality so that water is sparkling and free of unwanted tastes and odors. You’ll taste the difference in every sip you drink and everytime you brush your teeth.

the sensible solution

Our filters reduce lead amounts in your water — below the Federal Action Level of 10 ppb — as well as parasitic protozoan cysts and other microscopic particles that may be in your water supply.

the convenient solution

The SPA-400 is easily installed using common household tools. This system mounts under your sink and is plumbed to your standard lavatory faucet. And cartridge replacement is easy, too — just like changing a light bulb.

the practical solution

At only pennies per gallon, this system is less expensive per glass than bottled water or other drinking water systems and provides about a year’s supply of water, depending on the size of your family and the amount of water you use.

The Everpure SPA-400 Drinking Water System for the home spa and bath reduces the following contaminants:

> Lead > Cysts such as Giardia lamblia, Entamoeba histolytica and

Cryptosporidium parvum

And the following substances:

> Chlorine taste and odor > Dirt and cloudiness* > Mold and algae* > Oxidized iron* > Oxidized manganese* > Oxidized sulfides* > Particles 1/2 micron and larger in size

The SPA-400 delivers water at a 2.2 gal/min flow, and brings the convenience of filtered water to your home spa, master bath, children’s or guest bathroom.

product specifications

SPA-400

Commercial grade drinking water system

for the home spa and bath

This drinking water system must be

maintained according to the

manufacturer's instructions, including

replacement of ﬁlter cartridges. The

substances reduced or removed by this

system are not necessarily in your water.

Read the performance data sheet.

ﬂow rate

Controlled at 2.2 gal./min. (8.3 L/min.)

temperature

35-100 °F (2-38 °C) cold water use only

pressure

10-125 psi. (0.7-8.6 bar), non-shock

capacity

3,000 gal. (11,356 L)

everpure warranty

Everpure Drinking Water Systems are

warranted to be free of defects for a full

twelve (12) months after purchase. A

detailed warranty statement is provided

with each system.

SPA-400 System – Part No. EV9270-90 SPA-400 Cartridge – Part No. EV9270-91

Features:

> Finely polishes treated water to premium quality for drinking. > Reduces chlorine taste and odor. > Reduces dirt, rust, and other particulates such as oxidized iron, manganese, and sulﬁdes. > Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium. > Reduces common earthy, moldy, ﬁshy tastes, and odors. > Reduces lead to below the Federal Action Level.

General Installation/Operation/Maintenance Requirements:

> It is recommended that before purchasing a water treatment unit, you have your water tested to

determine your actual treatment needs.

> Space required: 5 x 5 x 20 in. (13 x 13 x 51 cm) including 2-1/2 inches of clear space under unit for

cartridge change. > Install vertically with cartridge hanging down. > Use minimum length of tubing possible. > Flush new cartridge at full ﬂow for three minutes to purge air. > Replace cartridges when capacity is reached, or when ﬂow becomes too slow, but at least annually. > Do not use with water that is microbiologically unsafe or of unknown quality without adequate

disinfection before or after the system. Systems certiﬁed for cyst reduction may be used on

disinfected water that may contain ﬁlterable cysts. > System comes complete with ﬁlter cartridge, head, ﬁttings, and connector.

ANSI/NSF

STANDARDS

42 and 53

HEALTH CLAIM PERFORMANCE CLASSIFIED BY UL

This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as speciﬁed in NSF/ANSI 42 and 53.

Substance

Standard 42—Aesthetic Effects

Chlorine 2.0 mg/L ± 10% ≥ 50% 98%

Particulate, Class I particles 0.5 to <1 µm

Standard 53—Health Effects

Cyst Minimum 50,000/L 99.95% 99.99% 99.99%

Lead 8.5 0.15 mg/L ± 10% 0.010 mg/L 94.1% 97.2%

Lead 6.5 0.15 mg/L ± 10% 0.010 mg/L 98.9% 98.9%

Turbidity 11±1 NTU 0.5 NTU 98% 99%

†NTU = Nephelometric Turbidity Units

Inﬂuent Challenge

Concentration

at least 10,000

particles/mL

Max. Permissible

Product Water Concentration

Reduction

Requirements

≥ 85% 99.8%

Minimum Reduction

Average

Reduction

System Tested and Classiﬁed by Underwriters Laboratories against NSF/ANSI Standards 42 and 53 as veriﬁed and substantiated by test data for the reduction of:

Std. No. 42—Aesthetic effects

Chemical Reduction

Chlorine Taste & Odor

Mechanical Filtration

Nominal Particulate Class I

Std. No. 53—Health effects

Chemical Reduction

Lead

Mechanical Filtration

Cyst Turbidity