Everpure HTS-11 User Manual

B E N E F I T S

A P P L I C A T I O N / S I Z I N G

I N S T A L L A T I O N T I P S

O P E R A T I O N T I P S

EV9799-11

Kl e enwa r e HT S -11 S ystem

Scale prevent ion and corrosion control for war ewas hing equ ipme nt

Scale control system features HydroBlend which
inhibits mineral deposits and provides corrosion
protection

Extends the life of expensive foodservice
equipment

Opaque (red) high temperature bowl
allows for hot water (up to 200°F) feed

installations

Transparent replacement cartridge containing
HydroBlend scale inhibitor, which is effective

up to 200°F

The HTS-11 system must be used as a unit (i.e.
high temperature bowl, head and cartridge)

Install vertically using the mounting bracket
provided

Use 3/4” water line and observe proper
inlet/outlet water directions

Some pressure relief mechanism should be
provided downstream of the system to permit
releasing line pressure when changing cartridges

Deliming of equipment prior to installation is
recommended, but not required

Kleenware HTS-10 System: EV9799-10

Kleenware HTS-11 System: EV9799-1
HT-10 Replacement Cartridge: EV9799-22

Inspect HT-10 cartridge at least every 6 months
for replacement

Pre-existing equipment scale may be dislodged
and settle to the bottom of a chamber which can
clog drain initially. Remove any settled scale

In new installations, the HydroBlend usage rate
may start high, but will be reduced as existing
scale is removed

Replace HT-10 cartridge before HydroBlend™
compound is completely used up

1

Specially designed flow through head assures
consistent, predictable product feed rates

Commercial dishwashers

Commercial glassware washers

Warewashing booster heaters

Overall Dimensions:
12-1/2”H x 4-3/4”W x 4-5/8”D

Inlet connection: 3/4”

Outlet connection: 3/4”

Service Flow Rate:
Maximum 15 gpm (56.8 Lpm)

Pressure Requirements:
10 - 200 psi (0.7 – 13.6 bar), non-shock

Temperature: 200°F (93°C)

No electrical connection required

Kl e enwa r e HT S - 11 S y stem

Shipping Weight: 7 lbs.

Operating Weight: 8 lbs.

Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.

Everpure, Inc.
1040 Muirfield Drive
Hanover Park, IL 60133
Phone: [phone] Fax: [phone]