Everpure EV9799-10, HTS-10 User Manual

BENEFITS

APPLICATION/SIZING

INSTALLATION TIPS

OPERATION TIPS

EV9799-10

Kleenware HTS-10 System

Scale prevention and corrosion control for warewashing equipment

Kleenware HTS-10 System: EV9799-10

HT-10 Replacement Cartridge: EV9799-22

Scale control system features HydroBlend which inhibits mineral deposits and provides corrosion protection

Extends the life of expensive foodservice equipment

Clear (amber shaded) high temperature bowl allows for hot water (up to 170°F) feed installations

Transparent replacement cartridge containing HydroBlend scale inhibitor, which is effective up to 200°F

Specially designed flow through head assures consistent, predictable product feed rates

The HTS-10 system must be used as a unit (i.e. high temperature bowl, head and cartridge)

Install vertically using the mounting bracket provided

Use 3/4” water line and observe proper inlet/ outlet water directions

Some pressure relief mechanism should be provided downstream of the system to permit releasing line pressure when changing cartridges

Deliming of equipment prior to installation is recommended, but not required

Inspect HT-10 cartridge at least every 6 months for replacement

Pre-existing equipment scale may be dislodged and settle to the bottom of a chamber which can clog drain initially. Remove any settled scale

In new installations, the HydroBlend usage rate may start high, but will be reduced as existing scale is removed

Replace HT-10 cartridge before HydroBlend™ compound is completely used up

Commercial dishwashers

Commercial glassware washers

Warewashing booster heaters

Overall Dimensions:

12.5”H x 4.75”W x 4.625”D

Inlet connection: 3/4”

Outlet connection: 3/4”

Service Flow Rate: Maximum 15 gpm (56.8 Lpm)

Pressure Requirements: 10 - 150 psi (0.7 – 10.3 bar), non-shock

Temperature: 170°F (77°C)

No electrical connection required

Kleenware HTS-10 System

Shipping Weight: 7 lbs.

Operating Weight: 8 lbs.

Everpure water treatment systems (excluding replaceable elements) are covered by a limited warranty against defects in material and workmanship for a period of five years after date of purchase. Everpure replaceable elements (filter cartridges and water treatment cartridges) are covered by a limited warranty against defects in material and workmanship for a period of one year after date of purchase. See printed warranty for details. Everpure will provide a copy of the warranty upon request.