BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
EV9798-45
SR-X Feeder
Superior scale prevention and corrosion control
A complete system that effectively targets scale in
both hot and cold environments
Provides protection against equipment corrosion
A sophisticated blend of polyphosphate
compound represents an advancement in scale
inhibition
Patented design (patent no. 5,580,448) dispenses
a controlled amount of Hydroblend™ for
long-term protection and provides greater
effectiveness than standard phosphate treatments
Choose a mounting location suitable to support
the full weight of the system when operating
Make sure to properly lubricate O-ring prior to
use
Use 3/4” water line (Optional reducer bushings
included)
Install vertically with bowl hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
SRX Feeder: EV9798-45
SRX Feeder: EV9798-45
SS-IMF Cartridge: EV9799-32
SS-IMF Cartridge: EV9799-32
Deliming of equipment prior to application is
recommended, but not required
Inspect SS-IMF cartridge at least every 6 months
Replace SS-IMF cartridge before Hydroblend™
compound is completely dissolved
Pre-existing equipment scale may come loose and
clog equipment. Remove any loose scale to assure
satisfactory operation
SS-10 cartridge is more effective in higher
alkalinty/hardness/TDS/temperature
installations.
Clear bowl and cartridge make it easy to
determine when Hydroblend compound is
exhausted
System includes SR-X housing, SS-IMF
cartridge and Spacer
The SS-IMF is NSF Certified under
NSF/ANSI Standard 42 for material
requirements only
For scale reduction applications
Provides scale reduction for ice applications
Overall Dimensions:
12.44”H x 5.16”W x 5.5”D
Inlet connection: 3/4”
Outlet connection: 3/4”
Service Flow Rate:
Maximum 6.0 gpm (22.7 Lpm)
Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock
Temperature: 35 - 100°F (2 - 38°C)
No electrical connection required
SR-X Feeder
SS-IMF Replacement Cartridge
Shipping Weight: 4 lbs.
Operating Weight: 6 lbs.
**The ScaleStick® trademark is used
pursuant to an agreement between PWC
Enterprises and Everpure, Inc.
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.
Everpure, Inc.
2375 Sanders Road
Northbrook, IL 60062
Phone: 800-323-7873 Fax: 800-942-0081