Everpure EV9008-11, EV9008-10 User Manual

Dual Temp Faucet

Everpure Contemporary series dual temperature hot/cold drinking water faucets deliver cold or ambient filtered water and near boiling
instant hot water from a single spout. Exclusively designed to be used with the Everpure Commercial Grade Instant Hot Water Dispenser
(Solaria™) and other vented instant hot systems, these faucets are equipped with a built-in safety feature with spring loaded shut off to
prevent accidents. The cold side may be connected to the Everpure Commercial Grade Water Chiller (Polaria™) for refreshingly chilled
drinking water or just simply enjoy ambient filtered water from any Everpure Drinking Water System. The Everpure Dual Temperature
faucet features solid stainless steel construction and is available in two beautiful finishes, Polished Stainless and Brushed Stainless. They
are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability. Blue and red indicators on the handles
distinguish hot and cold sides.

Contemporary Series

For commercial grade water filtration

It’s water filtration you can trust

The same commercial quality that makes Everpure the overwhelming choice for
water filtration in restaurants is also available for your home. Everpure’s
exclusive precoat filtration technology combines Micro-Pure and a unique
pleated filter membrane to reduce particles as small as 0.5 microns. This
highly engineered design offers the largest filtering surface area, longer life and
consistent performance.

the pure solution

Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip and
everything made with water will taste better, too.

Everpure Contemporary Hot/Cold Drinking Water
Faucets feature:

> Contemporary, dual handle design
> Selection of two beautiful finishes to match the most popular

designer faucets
> Spring loaded “hot” shut off valve safety feature
> Insulated heat-resistant spout
> Exclusively designed to be used with vented instant hot systems
> 0.5 GPM flow
> Lead-free
> Aerator tip provides even, clear stream of filtered water
> RO compatible with the use of a separate air gap

the convenient solution

Everpure systems are easily installed using common household tools. Our
systems mount under your sink and are plumbed to a separate filter faucet.
And cartridge replacement is easy, too — just like changing a light bulb.

product specifications

Dual Temp Faucet

Polished Stainless Steel EV9008-10
Brushed Stainless Steel EV9008-11

4“

8“

10“

7.25“

Contemporary Series

flow rate

0.5 gal./min. (1.9L/min.)

operating pressure

20 to 90 psi

temperature

50 to 212 ºF (10 to 100 ºC)

installation

1" or standard sink hole installation

everpure warranty

This faucet is warrant to be free and clear
of defect and workmanship defect for 5
years. The coated finish is warranted for 3
years. After 3 years, depending on local
water conditions and/or cleaning agents
used, the coating may not be as bright as
new. For general cleaning, use a soft
damp cloth. The use of cleaning
chemicals is not recommended.

Everpure
Drinking Water System*

*All products sold separately

Everpure® is a registered trademark of Everpure, LLC ©2008

Everpure
Polaria™*

Everpure
Solaria™*