Everpure EV9000-83, EV9000-87 User Manual

Everpure Helia™ Drinking Water Faucets are engineered to be used with:

Any Everpure Drinking Water Filtration systems or Reverse Osmosis system and

Everpure Helia™ Combination Instant Hot/Chilled Water Appliance

Helia™ Faucet

Everpure Helia™ drinking water faucets deliver instant chilled and instant hot water at the tap. The perfect complement to an Everpure commercial grade water filtration system, the Helia™ drinking water faucets are exclusively designed to be used with the Helia™ Combination Instant Hot/Chilled Water Appliance and are equipped with a built-in safety feature with spring loaded shut off to prevent accidents. Constructed of solid stainless steel and available in two beautiful finishes, Polished Stainless and Brushed Stainless, they are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability.

Designer Series

For commercial grade water filtration

It’s water filtration you can trust

The same commercial quality that makes Everpure the overwhelming choice for water filtration in restaurants is also available for your home. Everpure’s exclusive precoat filtration technology combines Micro-Pure and a unique pleated filter membrane to reduce particles as small as 0.5 microns. This highly engineered design offers the largest filtering surface area, longer life and consistent performance.

the pure solution

Our products polish water to premium quality so that water is sparkling and free of unwanted tastes and odors. You’ll taste the difference in every sip and everything made with water will taste better, too.

Everpure Helia™ Drinking Water Faucets are engineered to be used with:

> Sleek, dual handle design > Solid Stainless Steel construction in two beautiful finishes > Spring loaded “hot” shut off valve safety feature > Insulated heat-resistant spout > 0.5 GPM flow > Lead-free > Ceramic disc type valve > Aerator tip provides even, clear stream of filtered water > RO compatible with the use of a separate air gap

the convenient solution

Everpure systems are easily installed using common household tools. Our systems mount under your sink and are plumbed to a separate filter faucet. And cartridge replacement is easy, too — just like changing a light bulb.

product specifications

Helia™ Faucet

Polished Stainless Steel Finish - Part No. EV9000-83 Brushed Stainless Steel Finish - Part No. EV9000-87

4.25“

9.875“

1.75“

7“

4.625“

2.125“

Designer Series

flow rate

0.5 gal./min. (1.9L/min.)

operating pressure

20 to 90 psi

temperature

50 to 212 ºF (10 to 100 ºC)

installation

1" or standard sink hole installation

everpure warranty

This faucet is warrant to be free and clear of defect and workmanship defect for 5 years. The coated finish is warranted for 3 years. After 3 years, depending on local water conditions and/or cleaning agents used, the coating may not be as bright as new. For general cleaning, use a soft damp cloth. The use of cleaning chemicals is not recommended.

Everpure Drinking Water System*

*All products sold separately

Everpure Helia™ Front*

Everpure Helia™ Back*