Everpure Dual Temp Faucet User Manual

Polished Stainless Steel

Dual Temp Faucet

Everpure Designer Dual Temperature hot/cold drinking water faucets deliver cold or ambient filtered water and near boiling instant hot water from a single spout. Exclusively designed to be used with the Everpure Solaria™ Instant Hot Water Dispenser and other vented instant hot systems, these faucets are equipped with a built-in safety feature with spring loaded shut off to prevent accidents. The cold side may be connected to the Everpure Polaria™ Water Chiller for refreshingly chilled drinking water or just simply enjoy ambient filtered water from any Everpure Drinking Water System. The Everpure Dual Temperature faucet features solid stainless steel construction and is available in two beautiful finishes. They are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability. Blue and red indicators on handles distinguish hot and cold sides.

hot/cold drinking water faucet

For commercial grade water filtration

It’s water filtration you can trust

The same commercial quality that makes Everpure the overwhelming choice for water filtration in restaurants is also available for your home. Everpure’s exclusive precoat filtration technology combines Micro-Pure and a unique pleated filter membrane to reduce particles as small as 0.5 microns. This highly engineered design offers the largest filtering surface area, longer life and consistent performance.

the pure solution

Our products polish water to premium quality so that water is sparkling and free of unwanted tastes and odors. You’ll taste the difference in every sip and everything made with water will taste better, too.

Everpure Designer Hot/Cold Drinking Water Faucets feature:

> Sleek dual handle design > Solid Stainless Steel construction in two beautiful finishes > Spring loaded “hot” shut off valve safety feature > Insulated heat-resistant spout > Exclusively designed to be used with vented instant hot systems > 0.5 GPM flow > Lead-free > Ceramic disc type valve > Aerator tip provides even, clear stream of filtered water > RO compatible with the use of a separate air gap

the convenient solution

Everpure systems are easily installed using common household tools. Our systems mount under your sink and are plumbed to a separate filter faucet. And cartridge replacement is easy, too — just like changing a light bulb.

product specifications

Dual Temp Faucet

Polished Stainless Steel - Part No. EV9000-85 Brushed Stainless Steel - Part No. EV9000-86

4-1/4“

9-7/8“

1-3/4“

7“

4-5/8“

2-1/8“

hot/cold drinking water faucet

flow rate

0.5 gal/min. (1.9 L/min.)

temperature

50 to 212ºF (10 to 100ºC)

pressure

20 to 90 psi

installation

1” or standard sink hole installation

everpure warranty

This faucet is warrant to be free of defect and workmanship defect for 5 years. The coated finish is warranted for 3 years. After 3 years, depending on local water conditions and/or cleaning agents used, the coating may not be as bright as new. For general cleaning, use a soft damp cloth. The use of cleaning chemicals is not recommended.

Everpure

Drinking Water System*

*All products sold separately

Everpure

CGCL-1 Chiller*

Everpure

CGHE-1 Instant Hot*