Page 1
BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
CWS-10 Carbon Filter Wrap
Adds sediment and carbon filtration capabilities to Wrap
ScaleStick®, which provides scale and corrosion control
CWS-10 Carbon Block Filter Wrap:
EV9799-06
SSW-10 Wrap ScaleStick:
EV9799-04
CWS-10 Carbon Block Filter Wrap:
EV9799-06
SSW-10 Wrap ScaleStick:
EV9799-04
Features Hydroblend™ compound, a unique
blend that inhibits mineral scale deposits and
provides corrosion protection in low flow waterfed equipment
Patented design (patent no. 5,580,448) dispenses
a controlled amount of Hydroblend™ for longterm protection and provides greater effectiveness
than standard phosphate treatments
Unaffected by high temperatures, permitting a
wide variety of applications
Integral feed cartridge fits standard 10" housings
Translucent cartridge allows simple visual
monitoring of product usage and ensures against
wasteful premature cartridge replacement
Wrap ScaleStick® (SSW-10) is specially
designed to be used with a carbon block filter
wrap (CWS-10) to combine sediment filtration,
chlorine reduction and scale control. The
CWS-10 is designed to fit over and around the
Wrap ScaleStick® and is sold separately
Housing not included. Order Model A-10 Clear
10” Housing (EV9100-01) separately for
temperatures less than 125°F
Make sure selected housing fits temperature/
pressure conditions
Install vertically with black o-band seal up
Wrap ScaleStick® cartridges are shorter than
standard ScaleStick™ cartridges and do not have
the o-band seal. They cannot be installed without
the special filter wraps. Standard ScaleStick®
cartridges cannot be installed into filter wraps
Deliming of equipment prior to application is
recommended, but not required
Inspect ScaleStick® cartridges at least every 6
months
Replace ScaleStick® before Hydroblend™
compound is completely dissolved
Pre-existing equipment scale may come loose and
clog equipment. Remove any loose scale to assure
satisfactory operation
For water-using equipment:
Steamers and Combi-ovens
Ice Machines
Coffee and Espresso Machines
Proofers
EV9799-06
Page 2
CWS-10 Carbon Filter Wrap
Dimensions:
Filter Wrap:
7-11/16”H x 2-13/16” Diameter
Wrap ScaleStick SSW-10:
9-9/16" x 1-5/16" Diameter
Service Flow Rate:
0.1 - 6 gpm
Maximum Temperature:
150°F*
*If inlet feed water temperature is above
125°F a hot water housing must be used.
Note: Filter Wraps are not to be used in hot
water feed applications.
**The ScaleStick® trademark is used
pursuant to an agreement between PWC
Enterprises and Everpure, Inc.
Carbon Filter Wrap for SSW-10 Wrap ScaleStick
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.
Loading...