Contemporary Series
Everpure Contemporary series drinking water faucets deliver a steady stream of premium quality filtered water from Everpure commercial
grade water filtration systems. These separate filter faucets are available in two stunning finishes and colors to match today's high end
kitchen faucets.
POU drinking water faucet
For commercial grade water filtration
It’s water filtration you can trust
The same commercial quality that makes Everpure the overwhelming choice for
water filtration in restaurants is also available for your home. Everpure’s
exclusive precoat filtration technology combines Micro-Pure and a unique
pleated filter membrane to reduce particles as small as 0.5 microns. This
highly engineered design offers the largest filtering surface area, longer life and
consistent performance.
the pure solution
Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip and
everything made with water will taste better, too.
Everpure Contemporary Drinking Water Faucets
feature:
> Contemporary, versatile design
> Selection of two beautiful finishes to match the most popular
designer faucets
> Lead-free
> Forged brass construction
> Aerator tip provides even, clear stream of filtered water
> Ceramic disc type valve
> 0.5 GPM flow
> Certified to NSF/ANSI 61
> RO compatible with the use of a separate air gap
the convenient solution
Everpure systems are easily installed using common household tools. Our
systems mount under your sink and are plumbed to a separate filter faucet.
And cartridge replacement is easy, too — just like changing a light bulb.
product specifications
Contemporary Series
Chrome Finish - Part No. EV9008-00
Brushed Nickel Finish - Part No. EV9008-01
4“
5“
10“
7.25“
POU drinking water faucet
flow rate
0.5 gal./min. (1.9L/min.)
operating pressure
20 to 90 psi
temperature
50 to 90 ºF (10 to 35 ºC)
installation
1/2" or standard sink hole installation
everpure warranty
This faucet is warrant to be free and clear
of defect and workmanship defect for 5
years. The coated finish is warranted for 3
years. After 3 years, depending on local
water conditions and/or cleaning agents
used, the coating may not be as bright as
new. For general cleaning, use a soft
damp cloth. The use of cleaning
chemicals is not recommended.
Everpure® is a registered trademark of Everpure, LLC ©2008