EVERLIGHT LED SMD 3528 GR1 Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet
TOP View LEDs

67-21/G6C-AP1Q2/2T

Features

․P-LCC-2 package.
․White package.

․Optical indicator.
․Colorless clear window.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow

and wave solder processes.

․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS compliant version.

Descriptions

․The 67-21 series is available in soft orange,

green,blue and yellow. Due to the package design,
the LED has wide viewing angle and optimized
light coupling by inter reflector. This feature
makes the ideal for light pipe application. The low
current requirement makes this device ideal for
portable equipment or any other application where
power is at a premium.

Applications

․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.

Device Selection Guide

Chip

Material Emitted Color

AlGaInP Brilliant Yellow Green Water Clear

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

Lens Color

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Package Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Units

Reverse Voltage VR 5 V

Forward Current IF 40 mA

Operating Temperature Topr -40 ~ +85

Storage Temperature Tstg -40 ~ +100

Electrostatic Discharge(HBM) ESD 2000 V

Power Dissipation Pd 100 mW

Peak Forward Current

(Duty 1/10 @1KHz)

Soldering Temperature Tsol

IFP 80 mA

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

℃

℃

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous intensity

Viewing Angle

Peak Wavelength

Dominant Wavelength

Spectrum Radiation Bandwidth

Forward Voltage

Reverse Current

IV

2θ1/2

λp
λd

△λ

VF ----- 2.0 2.4 V IF=20mA

IR ----- -----

45 -----

----- 120

-----

570.0

-----

Notes:

1.Tolerance of Luminous Intensity ±10%

575

-----

20

112 mcd IF=20mA

----- deg

----- nm

574.5

----- nm

10

IF=20mA

IF=20mA

nm IF=20mA

IF=20mA

μA

VR=5V

2.Tolerance of Dominant Wavelength ±1nm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Bin Range Of Dominant Wavelength

Group Bin Code Min. Max. Unit Condition

C16 569.5 571.5

A

C17 571.5 573.5
C18 573.5 575.5
C19 575.5 577.5

Bin Rang Of Luminous Intensity

Bin Min Max Unit Condition

P1 45.0 57.0

P2 57.0 72.0
Q1 72.0 90.0
Q2 90.0 112.0

Notes:

1.Tolerance of Luminous Intensity ±10%

2.Tolerance of Dominant Wavelength ±1nm

nm IF=20mA

mcd IF=20mA

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Typical Electro-Optical Characteristics Curves

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Label explanation

CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.

Note: The tolerances unless mentioned is ±0.1mm Unit = mm

Moisture Resistant Packaging

Label

Aluminum moisture-proof bag

Desiccant Label

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.
Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles

Temp. : 260℃±5℃

6 min

1 Reflow Soldering

Min. 5sec.

H : +100℃ 15min

2 Temperature Cycle

∫ 5 min

300 Cycles

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

300 Cycles

L : -10℃ 5min

1000 Hrs.

4

High Temperature

Temp. : 100℃

Storage

1000 Hrs.

5

Low Temperature

Temp. : -40℃

Storage

Sample

Ac/Re

Size

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

1000 Hrs.

6 DC Operating Life IF = 20 mA

7

High Temperature /

85℃/ 85%RH

1000 Hrs.

22 PCS. 0/1

22 PCS. 0/1

High Humidity

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

67-21/G6C-AP1Q2/2T

Precautions For Use

1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu

EVERLIGHT ELECTRONICS CO.,LTD.

E

67-21/G6C-AP1Q2/2T

5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

VERLIGHT ELECTRONICS CO., LTD. Tel: [phone]

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 10
Device No. :DES-671-256 prepared date:17-Oct-2005 Prepared by: Venis Wu