Page 1
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LED(1.0mm Height)
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS complaint version.
Descriptions
․The 15-21 SMD LED is much smaller than
lead frame type components, thus enable
smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
15-21/B6C-YR1S2B2/2T
Device Selection Guide
15-21/B6C-YR1S2B2/2T InGaN Blue Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
PART No.
Chip
Material
Emitted Color Resin Color
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 2
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Package Outline Dimensions
0.8 1.6 0.8
1.4
1.5
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
1.2 1.2
1.5
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 3
EVERLIGHT ELECTRONICS CO.,LTD.
Spectrum Radiation
15-21/B6C-YR1S2B2/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage
Forward Current
V
R
I
F
5
25
Peak Forward Current
100
95
150
-40 ~ +85
-40~ +90
(Duty 1/10 @1KHz)
Power Dissipation
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
I
FP
Pd
ESD
Topr
Tstg
Reflow Soldering : 260
Soldering Temperature Tsol
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv 112 ----- 285 mcd
Viewing Angle 2θ1/2 ----- 130 ----- deg
V
mA
mA
mW
V
℃
℃
℃ for 10 sec.
Peak Wavelength λp ----- 468 ----- nm
Dominant Wavelength
Bandwidth
Forward Voltage V
Reverse Current I
λd
△λ
F
R
470.0 ----- 475.0
----- 25 -----
2.90 ---- 3.60
----- ----- 50 μA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
IF=20mA
nm
nm
V
VR=5V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 4
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Bin Range Of Dom. Wavelength
Bin Min Max Unit Condition
Y 470.0 475.0 nm IF =20mA
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
R1 112 140
R2 140 180
S1 180 225
S2 225 285
mcd I
Bin Range Of Forward Voltage
Group Bin Min Max Unit Condition
36 2.90 3.00
37 3.00 3.10
38 3.10 3.20
B2
39 3.20 3.30
40 3.30 3.40
41 3.40 3.50
42 3.50 3.60
V IF =20mA
Notes:
1.Tolerance of Luminous Intensity ±11%
=20mA
F
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05 V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 5
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Typical Electro-Optical Characteristics
)%
(
Relative luminous intensity
% )
(
1000
100
Wavelength λ(nm)
Ta=25°C
Ta=25°C
Forward Current I (mA)
Forward Voltage V (V)
)%
(
F
Ta=25°C
10
Relative luminous intensity
1
-60
-20-40 0 206040
Ambient Temperature T (°C
a
10080
)
Relative luminous intensity
Forward Current I (mA)
0°
10°
20°
Ta=25°C
30°
40°
1.0
0.9
0.8
Forward Current I (mA)
0.7
50°
60°
70°
80°
90°
Ambient Temperature T (°C
a
)
0.5 0.1
0.20.3
0.4 0.6
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 6
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 7
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant Label
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 8
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Temp. : 260
℃±5℃
1 Reflow Soldering
Min. 5 sec.
℃ 15min
∫ 5 min
℃ 15min
℃ 5min
∫ 10 sec
℃ 5min
℃
2 Temperature Cycle
3 Thermal Shock
High Temperature
4
H : +100
L : -40
H : +100
L : -10
Temp. : 100
Storage
5
Low Temperature
Temp. : -40
℃
Storage
6 DC Operating Life IF = 20 mA
Test
Hours/Cycles
6 Min.
300 Cycles
300 Cycles
1000 Hrs.
1000 Hrs.
1000 Hrs.
Sample
Ac/Re
Size
22 Pcs.
0/1
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
22 PCS.
0/1
22 PCS. 0/1
7
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
High Temperature /
High Humidity
85
℃/85%RH
1000 Hrs.
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
22 PCS.
0/1
Page 9
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Page 10
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/B6C-YR1S2B2/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10
Device No: SZDSE-151-B21 Prepared date: 29-Apr-2008 Prepared by: LeiHui
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
Loading...