EVERLIGHT LED EL 0603 RT Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet
0603 Package Chip LED(0.6mm Height)

19-213/R6C-AQ1R2B/3T

Features

․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version

Descriptions

․The 19-213 SMD Taping is much smaller

than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.
․General use.

Device Selection Guide

Chip

Part No.

Material

19-213/R6C-AQ1R2B/3T AlGaInP

Emitted Color Resin Color

Brilliant Red Water Clear

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Package Outline Dimensions

Note: Tolerances Unless Dimension is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz)

Power Dissipation Pd 60 mW

Electrostatic Discharge(HBM) ESD 2000 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol

IFP 60 mA

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv

Viewing Angle 2θ1/2 ----- 120 ----- deg

Peak Wavelength λp ----- 632 ----- nm

Dominant Wavelength

λd 617.5 ----- 633.5 nm

72.0

----- 180 mcd

IF=20mA

Spectrum Radiation

Bandwidth

Forward Voltage V

Reverse Current I

△λ ----- 20 ----- nm

F

----- ----- 10 μA

R

1.75 ----- 2.35

V

VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11 %

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Bin Range Of Dom. Wavelength

Groups Bin Min Max

E4 617.5 621.5
E5 621.5 625.5

A

E6 625.5 629.5
E7 629.5 633.5

Bin Range Of Luminous Intensity

Bin Min Max

Q1 72.0 90.0
Q2 90.0 112

R1 112 140
R2 140 180

Bin Range Of Forward Voltage

Groups Bin Min Max

Unit

nm IF=20mA

Condition

Unit

mcd IF=20mA

Unit

Condition

Condition

0 1.75 1.95

B

1 1.95 2.15
2 2.15 2.35

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

V IF=20mA

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Typical Electro-Optical Characteristics Curves

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Label explanation

CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank

xxxxxx

xxxxxx

RoHS

xxxxxxxxxxxx

xxxx

Reel Dimensions

xxxxxxxx

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label

Aluminum moisture-proof bag

Desiccant Label

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.
Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles

Temp. : 260℃±5℃

1 Reflow Soldering

Min. 5sec.

6 Min.

H : +100℃ 15min

2 Temperature Cycle

∫ 5 min

300 Cycles

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

300 Cycles

L : -10℃ 5min

4

High Temperature

Temp. : 100℃

1000 Hrs.

Storage

5

Low Temperature

Storage

6 DC Operating Life IF = 20 mA

Temp. : -40℃

1000 Hrs.

1000 Hrs.

Sample

Ac/Re

Size

22 Pcs. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

7

High Temperature /

85℃/85%RH

1000 Hrs.

22 PCS. 0/1

High Humidity

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

Precautions For Use

1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-Free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen

EVERLIGHT ELECTRONICS CO.,LTD.

19-213/R6C-AQ1R2B/3T

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.

5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: [phone]
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]

Reliability Test Items And Conditions

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com

The reliability of products shall be satisfied with items listed below.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10

Device No:SZDSE-193-R25 Prepared date:21-Mar-2007 Prepared by: duang jing fen