Page 1
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.6mm Height)
19-213/B7C-AQ2S1B2/3T
Features
․Package in 8mm tape on 7〞 diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS complaint version
Descriptions
․ The 19-213 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․ Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
19-213/B7C-AQ2S1B2/3T InGaN Blue Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Part No.
Chip
Emitted Color Resin Color
Material
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 2
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Package Outline Dimensions
1.0
-
+
Note: The tolerances unless mentioned are ± 0.1mm, unit = mm.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 3
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Absolute Maximum Ratings (Ta=25℃ )
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current I
Peak Forward Current
(Duty 1/10 @1KHz)
Power Dissipation Pd 110 mW
Electrostatic Discharge(HBM) ESD 1000 V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol
F
IFP 100 mA
Reflow Soldering:260
Hand Soldering:350
30 mA
℃ for 10 sec
℃ for 3 sec
Electro-Optical Characteristics (Ta=25℃ )
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv 90.0 ----- 225 mcd
Viewing Angle 2θ 1/2 ----- 120 ----- deg
Peak Wavelength λ p ----- 468 ----- nm
Dominant Wavelength
Spectrum Radiati
Bandwidth
Forward Voltage V
Reverse Current I
λd
△λ
F
R
464.5 ----- 476.5
----- 35 -----
2.90 ----- 3.60
----- ----- 50 μ A
nm
nm
V
IF =20mA
VR =5V
Notes:
1.Tolerance of Luminous Intensity ± 11%
2.Tolerance of Dominant Wavelength ± 1nm
3.Tolerance of Forward Voltage ± 0.05 V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 10
Revision : 1
LifecyclePhase:
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 4
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Bin Range Of Dom. Wavelength
Group Bin Min Max Unit Condition
A9 464.5 467.5
A10 467.5 470.5
A
A11 470.5 473.5
A12 473.5 476.5
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
Q2 90.0 112
nm IF =20mA
R1 112 140
R2 140 180
S1 180 225
mcd IF =20mA
Bin Range Of Luminous Voltage
Group Bin Min Max Unit Condition
36 2.90 3.00
37 3.00 3.10
38 3.10 3.20
B2
39 3.20 3.30
40 3.30 3.40
41 3.40 3.50
42 3.50 3.60
V IF =20mA
Notes:
1.Tolerance of Luminous Intensity ± 11%
2.Tolerance of Dominant Wavelength ± 1nm
3.Tolerance of Forward Voltage ± 0.05 V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 5
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Typical Electro-Optical Characteristics Curves
)
%
(
Relative luminous intensity
Spectrum Distribution
100
75
50
25
0
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
1000
100
Ta=25°C
Forward Voltage
50
I (mA)
40
F
30
20
Forward Current
10
0
Forward Voltage (V )-volts
Luminous Intensity vs
Forward Current
Ta=25°C
F
Ta=25°C
10
Relative luminous intensity
1
-60
50
40
30
20
Forward Current
10
0
-20 -40 0 206040 100 80
Ambient Temperature Ta (°C)
Forward Current Derating Curve
0
Ambient Temperature Ta (°C)
402060 100 85
1.0
0.9
0.8
0.7
Forward Current
Radiation Diagram
0° 10° 20°
0.4 0.3 0.5 0.1 0.2
Ta=25°C
30°
40°
50°
60°
70°
80°
90°
0.6
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 6
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Note: The tolerances unless mentioned are ± 0.1mm, unit = mm.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 7
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned are ± 0.1mm, unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant Label
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 8
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level: 90%
LTPD: 10%
No. Items Test Condition
Temp. : 260
℃± 5℃
1 Reflow Soldering
Min. 5sec.
℃ 15min
∫ 5 min
℃ 15min
℃ 5min
∫ 10 sec
℃ 5min
℃
2 Temperature Cycle
3 Thermal Shock
High Temperature
4
H : +100
L : -40
H : +100
L : -10
Temp. : 100
Storage
5
Low Temperature
Temp. : -40
℃
Storage
6 DC Operating Life IF = 20 mA
Test
Hours/Cycles
6 Min.
300 Cycles
300 Cycles
1000 Hrs.
1000 Hrs.
1000 Hrs.
Sample
Ac/Re
Size
22 PCS.
0/1
22 PCS. 0/1
22 PCS. 0/1
22 PCS.
22 PCS.
0/1
0/1
22 PCS. 0/1
7
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
High Temperature /
High Humidity
85
℃ / 85%RH
1000 Hrs.
Release Date:2008-09-20 00:16:11.0
22 PCS.
0/1
LifecyclePhase:
Expired Period: Forever
Page 9
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60± 5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
Page 10
EVERLIGHT ELECTRONICS CO.,LTD.
19-213/B7C-AQ2S1B2/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 10
Device No:SZDSE-193-B39 Prepared date:24-Oct -2007 Prepared by: Yuan Shaoxiang
Revision : 1
LifecyclePhase:
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever