Page 1
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
████
Features
．
PACKAGE IN 8mm TAPE ON 7“ DIAMETER
REEL .
．
COMPATIBLE WITH AUTOMATIC PLACE-
MENT EQUIPMENT.
．
COMPATIBLE WITH INFRARED AND VAP-
OR PHASE REFLOW SOLDER PROCESS.
．
MONO-COLOR TYPE.
████
Description
．
The 19-21 SMD Taping is much smaller than le-
aded components, thus enable smaller board size,
higher packing density, reduced storage space and
finally smaller equipment to be obtained.
：：：：
：：：：
Device Number
ECN
████
Package Dimension
：
DSE-191-043 REV. 1.0
：
：：：：
-
+-
Page: 1/8
．
Besides, light Weight makes them ideal for minia-
ture application, etc.
████
Applications
．
Automotive: backlighting in dashboard and switch.
．
Telecommuncation: indicator and backlighting in telephone and fax.
．
Flat backlight for LCD, switch and symbol.
．
General use.
：：：：
CHIP
Material Emitted Color
19-21UYC/S530-A2/TR8
Office:
NO 25,Lane.76, Chung Yang Rd., Sec.3, Tucheng, Taipei 236, Taiwan, R.O.C.
TEL:
886-2-2267-2000,2266-9936(22 Lines)
AlGaInP Super Yellow Water Clear
■■■■
Notes
Tolerances Unless Dimension
0.1mm
Angle±0.5
：：：：
°
Lens ColorPART NO
±
FAX:
http:
886-2-2267-6189
//www.everlight.com
Page 2
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Package Dimension
：：：：
Device Number
ECN
：
DSE-191-043 REV. 1.0
：
Page: 2/8
■■■■
Loaded quantity per reel 3000 pcs/reel
：：：：
Page 3
EVERLIGHT ELECTRONICS CO.,LTD.
g
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Absolute Maximum Ratings at Ta = 25
Parameter Symbol Ratin
Reverse Voltage Vr
Forward Current If
Operating Temperature
Storage Temperature
Soldering Temperature
Topr
Tstg
Tsol
Device Number
ECN
℃℃℃℃
5
25
-40 ~ +85
-40 ~ +90
260 (for 5 second)
：
DSE-191-043 REV. 1.0
：
Unit
V
mA
℃
℃
℃
Page: 3/8
Power Dissipation Pd
Peak Forward
Current(Duty 1/10 @
1KHZ)
■■■■
Electronic Optical Characteristics :
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous intensity
Viewing Angle
Peak Wavelength
Dominant
Wavelength
Spectrum Radiation
Bandwidth
Iv
2θ1/2
p
λ
d
λ
△λ
If(Peak)
16 40 -----
----- 100 -----
----- 591 -----
----- 589 -----
----- 15 -----
60
160
mW
mA
mcd If=20mA
deg If=20mA
nm If=20mA
nm If=20mA
nm If=20mA
Forward Voltage
Reverse
Current
Vf
Ir
----- 2.0 2.4
----- ----- 10
V If=20mA
A
µ
Vr=5V
Page 4
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Reliability Test Item And Condition
NO Item Test Conditions
1
2
3
Solder Heat TEMP : 260℃ ± 5
Temperature Cycle
Thermal Shock
Device Number
H : +85℃ 30min
5 min
∫
L : -55℃ 30min
H : +100℃ 5min
10 sec
∫
：
ECN
Test
Hours/Cycle
℃
5 SEC 76 Pcs 0/1
50 CYCLE 76 Pcs 0/1
50 CYCLE 76 Pcs 0/1
DSE-191-043 REV. 1.0
：
Sample
Size
Page: 4/8
Ac/Re
L : -10℃ 5min
4
5
6
7
High Temperature Storage TEMP : 100
High Temperature Storage TEMP : -55
DC Operating Life If = 20 mA 1000 HRS 76 Pcs 0/1
High Temperature /
85℃/85% RH 1000 HRS 76 Pcs 0/1
High Humidity
℃
℃
1000 HRS 76 Pcs 0/1
1000 HRS 76 Pcs 0/1
Page 5
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Typical Electro-Optical Characteristic Curves
Device Number
ECN
：
DSE-191-043 REV. 1.0
：
Page: 5/8
Page 6
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Test Circuit
R
Device Number
ECN
LED
：
DSE-191-043 REV. 1.0
：
Page: 6/8
■■■■
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause
big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of temperature and R.H. are : 5℃~35℃, R.H.60%.
2.2 Once the package is opened , the products should be used within a week.
Otherwise , they should be keep in a dampproof box with desiccants.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5℃~35℃, R.H.60%
they should be treated at 60
℃±5℃
for 15hrs.
,
2.4 When you discover that the desiccant in the package has a pink color
(normal=blue) , you should treat them in the same conditions as 2.3.
Page 7
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Soldering heat reliability ( DIP )
Please refer to the following figure :
Device Number
ECN
：
DSE-191-043 REV. 1.0
：
Page: 7/8
Soldering Iron
■
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10
℃
→ -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable.Surface temperature of the device should be under 230 ℃.
Rework
■
1. Customer must finish rework within 5 sec under 260℃.
2. Copper foil can not be touched by the head of iron.
3. Twin-head type is preferred.
○
×
Page 8
EVERLIGHT ELECTRONICS CO.,LTD.
MODEL NO:
19-21UYC/S530-A2/TR8
0.8mm Height Flat Top LEDs
■■■■
Reflow Temp / Time
：：：：
preheat
to rise
Device Number
ECN
cooling
：
DSE-191-043 REV. 1.0
：
Page: 8/8
Loading...