EVERLIGHT EVL 15-21UYD/S5 Datasheet

Page 1

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 1206 Package Chip LED (1.1 mm Height)

Features

․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type. ․Pb-free.

․The product itself will remain within RoHS complaint version

Descriptions

․The 15-21 SMD Taping is much smaller

than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol. ․General use.

15-21UYD/S530-A3/TR8

Device Selection Guide

PART No.

Material Emitted Color

15-21UYD/S530-A3/TR8 AlGaInP Brilliant Yellow Yellow Diffused

Chip

Lens Color

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 2

EVERLIGHT ELECTRONICS CO.,LTD.

Package Outline Dimensions

15-21UYD/S530-A3/TR8

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 3

EVERLIGHT ELECTRONICS CO.,LTD.

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA

Operating Temperature Topr -40 ~ +85

Storage Temperature Tstg -40 ~ +90

Electrostatic Discharge ESD 2000 V

Power Dissipation Pd 60 mW

Peak Forward Current

60 mA

(Duty 1/10 @1KHz)

Reflow Soldering : 260 ℃ for 10 sec.

Soldering Temperature Tsol

Electro-Optical Characteristics (Ta=25℃)

Hand Soldering : 350 ℃ for 3 sec.

15-21UYD/S530-A3/TR8

℃ ℃

Parameter

Luminous Intensity

Viewing Angle

Peak Wavelength

Dominant Wavelength

Spectrum radiation bandwidth

Forward Voltage

Reverse Current

Symbol

2θ1/2

λp λd

△λ

Notes:

1.Tolerance of Luminous Intensity ±10%

Min. Typ. Max.

28.5 57 ----

----- 130 -----

----- 591 -----

----- 589 -----

----- 15 -----

----- 2.0 2.4

----- ----- 10

Unit Condition mcd IF=20mA

deg

nm nm nm

μA VR=5V

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 4

EVERLIGHT ELECTRONICS CO.,LTD.

Electro-Optical Characteristics (Ta=25℃)

15-21UYD/S530-A3/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 5

EVERLIGHT ELECTRONICS CO.,LTD.

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

15-21UYD/S530-A3/TR8

xxxxxx xxxxxx

RoHS

xxxxxxxxxxxx

xxxx

xxxxxxxx

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 6

EVERLIGHT ELECTRONICS CO.,LTD.

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

15-21UYD/S530-A3/TR8

Moisture Resistant Packaging

Label

Aluminum moisture-proof bag

Desiccant Label

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 7

EVERLIGHT ELECTRONICS CO.,LTD.

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below. Confidence level：90%

LTPD：10%

No. Items Test Condition

Temp. : 260℃±5℃

1 Reflow Soldering

Min.5 sec.

H : +100℃ 15min

2 Temperature Cycle

∫ 5 min

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

L : -10℃ 5min

Hours/Cycles

300 Cycles

15-21UYD/S530-A3/TR8

Test

6 Min.

Sample

Ac/Re

Size

22 Pcs. 0/1

22 PCS. 0/1

High Temperature

Temp. : 100℃

Storage

Low Temperature

Temp. : -40℃

Storage

6 DC Operating Life IF = 20 mA

High Temperature /

85℃/85%RH

High Humidity

1000 Hrs.

22 PCS. 0/1

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 8

EVERLIGHT ELECTRONICS CO.,LTD.

Precautions For Use

1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

15-21UYD/S530-A3/TR8

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

the hand solder.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng

Page 9

EVERLIGHT ELECTRONICS CO.,LTD.

5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

15-21UYD/S530-A3/TR8

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 9 Device No: SZDSE-151-033 Prepared date: 18-Apr.-2006 Prepared by: Zhang Cheng