Page 1
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LED
15-21UYC/S530-XX/TR8
Features
˙Package in 8mm tape on 7〞diameter reel.
˙Compatible with automatic placement equipment.-
˙Compatible with infrared and vapor phase reflow
solder process.
˙Mono-color type.
Descriptions
˙The 15-21 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
˙Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
˙Automotive: backlighting in dashboard and switch.
˙Telecommunication: indicator and backlighting in
telephone and fax.
˙Flat backlight for LCD, switch and symbol.
˙General use.
Device Selection Guide
Chip
Material Emitted Color
AlGaInP Super Yellow Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 7
Device No. : DSE-151-092 ECN :
Lens Color
Page 2
EVERLIGHT ELECTRONICS CO.,LTD.
Package Outline Dimensions
15-21UYC/S530-XX/TR8
Notes: Tolerances Unless Dimension ± 0.1mm , Angle± 0.5° ,Unit = mm
Absolute Maximum Ratings (Ta=25℃℃℃℃)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40~ +90 ℃
Soldering Temperature Tsol
Electrostatic Discharge ESD
Power Dissipation Pd 60 mW
Peak Forward Current
IF 160 mA
(Duty 1/10 @1KHz)
260 (for 5
second)
2000
℃
V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 2 of 7
Device No. : DSE-151-092 ECN :
Page 3
EVERLIGHT ELECTRONICS CO.,LTD.
Electro-Optical Characteristics (Ta=25℃℃℃℃)
Parameter
Symbol
*Chip
Min. Typ. Max. Unit Condition
Rank
A2 15 39 ----A3 36 57 -----
Luminous Intensity
Iv
A4 51 77 ----A5 62 98 ----A6 77 113 -----
Viewing Angle
Peak Wavelength
Dominant Wavele ngt h
Spectrum Radiation
Bandwidth
Forward Voltage
2θ1/2
----- 140 -----
λp
----- 591 ----- nm
λd
△λ
V
F
----- 589 -----
----- 15 -----
----- 2.0 2.4
15-21UYC/S530-XX/TR8
mcd IF=20 mA
deg IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
nm
nm
V
Reverse Current I
R
----- ----- 10
μA
VR=5V
*15-21UYC/S530-XX/TR8
Reel & Carrier Tape Dimensions Loaded quantity per reel 2000 PCS/reel
Notes: Tolerances Unless Dimension ± 0.1mm , Angle± 0.5° ,Unit = mm
Chip Rank
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 3 of 7
Device No. : DSE-151-092 ECN :
Page 4
EVERLIGHT ELECTRONICS CO.,LTD.
Typical Electro-Optical Characteristics Curves
15-21UYC/S530-XX/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 4 of 7
Device No. : DSE-151-092 ECN :
Page 5
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Reliability Test Items And Conditions
No. Items Test Condition
1 Solder Heat
Temp. : 260℃± 5℃
H : +85℃ 30min
2 Temperature Cycle
∫ 5 min
L : -55℃ 30min
H : +100℃ 5min
3 Thermal Shock
∫ 10 sec
L : -10℃ 5min
4
High Temperature
Temp. : 100℃
Storage
5
Low Temperature
Temp. : -55℃
Storage
Hours/Cycles
50 Cycles
50 Cycles
1000 Hrs.
1000 Hrs.
Test
5 Sec.
Sample
Ac/Rc
Size
76 PCS. 0/1
76 PCS. 0/1
76 PCS. 0/1
76 PCS. 0/1
76 PCS. 0/1
6 DC Operating Life IF = 20
7
High Temperature /
85℃/RH85%
High Humidity
mA
1000 Hrs.
1000 Hrs.
76 PCS. 0/1
76 PCS. 0/1
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 5 of 7
Device No. : DSE-151-092 ECN :
Page 6
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift
will cause big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of Temperature and RH are : 5℃~35℃, RH60%.
2.2 Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5℃~35℃, RH 60%,
they should be treated at 60℃± 5℃for 15hrs.
2.4 When you discover that the desiccant in the package has a pink color
(Normal = blue) , you should treat them in the same conditions as 2.3.
Soldering heat reliability ( DIP ) Reflow Temp / Time
Soldering Iron
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃→
-1sec). Power dissipation of Iron should be smaller than 15 W , and temperature should be
controllable. Surface temperature of the device should be under 230 ℃.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 6 of 7
Device No. : DSE-151-092 ECN :
Page 7
EVERLIGHT ELECTRONICS CO.,LTD.
Rework
1. Customer must finish rework within 5 sec under 245℃.
2. The head of iron can not touch copper foil.
3. Twin-head type is preferred.
○
15-21UYC/S530-XX/TR8
×
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 7 of 7
Device No. : DSE-151-092 ECN :
Loading...