• High isolation voltage between input
and output (Viso=5000 V rms )
• Wide Operating temperature range
-55~110ºC
• High collector-emitter voltage V
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CSA approved
=±1mA ,VCE =5V)
F
=80V
CEO
EL814 Series
Description
The EL814 series of devices each consist of two infrared
emitting diodes, connected in inverse parallel, optically
coupled to a phototransistor detector.
They are packaged in a 4-pin DIP package and available
X = Lead form option (S, S1, M or none)
Y = CTR Rank option (A or none)
Z = Tape and reel option (TA, TB, TU, TD or none)
F = Lead frame option (F: Iron, None: copper)
V = VDE option.
Option Description Packing quantity
None Standard DIP-4 100 units per tube
M Wide lead bend (0.4 inch spacing) 100 units per tube
S (TA) Surface mount lead form + TA tape & reel option 1000 units per reel
S (TB) Surface mount lead form + TB tape & reel option 1000 units per reel
S1 (TA) Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel
S1 (TB) Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel
S (TU) Surface mount lead form + TU tape & reel option 1500 units per reel
S (TD) Surface mount lead form + TD tape & reel option 1500 units per reel
S1 (TU) Surface mount lead form (low profile) + TU tape & reel option 1500 units per reel
S1 (TD) Surface mount lead form (low profile) + TD tape & reel option 1500 units per reel
EL denotes EVERLIGHT
814 denotes Device Number
F denotes Factory Code (None: China, T: Taiwan)
R denotes CTR Rank (A or none)
Y denotes 1 digit Year code
WW denotes 2 digit Week code
V denotes VDE option
1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority
on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for use as
outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of
the product which does not comply with the absolute maximum ratings and the instructions included in this
datasheet.
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in
any form is prohibited without the specific consent of EVERLIGHT.