Everlight 18-225/B6R6C-C01/3T, 19-337/R6GHBHC-A01/2T Technical Data Sheet

Technical Data Sheet
Chip LED with Bi-Color(Multi-Color)

18-225/B6R6C-C01/3T

Features

․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow

solder process.

․Multi-Color type.
․Pb-free.
․The product itself will remain within RoHS

compliant version.

Descriptions

․The 18-225 SMD LED is much smaller than lead

frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.
․General use.

Device Selection Guide

Chip

Type Material Emitted Color

B6 InGaN Blue

R6 AlGaInP Brilliant Red

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Resin Color

Water Clear

Package Outline Dimensions

1.6

18-225/B6R6C-C01/3T

0.8

0.5

0.320.32

3

4

0.4 0.8 0.4

4

3

2

1

1

2

Cathode Mark

0.15

Blue

-

3

4

-

Blue

2

+

Red

1

+

Red

Polarity

Recomm end S oldering Pad

0.5 0.7 0.5

0.4

0.4

0.3

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Absolute Maximum Ratings (Ta=25℃)

18-225/B6R6C-C01/3T

Parameter

Reverse Voltage VR 5 V

Forward Current IF

Peak Forward Current

(Duty 1/10 @1KHz)

Power Dissipation Pd

Electrostatic Discharge(HBM) ESD

Operating Temperature Topr -40 ~ +85

Storage Temperature Tstg -40 ~ +90

Soldering Temperature Tsol

Symbol

IFP

Rating Unit

B6:25

mA

R6:25

B6:100

mA

R6:60

B6:110

mW

R6:60

B6:150

V

R6:2000

℃
℃

Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

18-225/B6R6C-C01/3T

Iv B6

Luminous Intensity

Viewing Angle 2θ1/2 ----- 120 ----- deg IF=5mA

Peak Wavelength

Dominant Wavelength

Spectrum Radiation

Bandwidth

Forward Voltage

Reverse Current

λp B6

λd B6

△λ B6

VF B6

IR B6

R6

R6

R6

R6

R6

R6

18.0

18.0

-----

-----

-----

2.7

1.7

----- -----

28.5

28.5

468
632

470
624

35
20

3.3

2.0

----- mcd IF=5mA

----- nm IF=5mA

-----

-----

3.7

2.4

50
10

nm

nm

V IF=5mA

μA

IF=5mA

IF=5mA

VR=5V

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Typical Electro-Optical Characteristics Curves

B6

Spectrum Distribution

100

75

50

25

Relative luminous intensity (%)

0

450 500

400

Wavelength λ (nm)

Ta=25°C

550

I (mA)

Forward Current

600

18-225/B6R6C-C01/3T

Forward Current vs.
Forward Voltage

50

F

40

30
25
20

10

0

2.6

Forward Voltage V (V)

Ta=25°C

4.23.43.0 3.8 4.5

F

1000

100

Relative luminous intensity (%)

F

I (mA)

Forward Current

Luminous Intensity vs.

Ambient Temperature

10

1

-60

50

40

30
25

20

10

0

-20-40 0 206040 10080

Ambient Temperature Ta (°C)

Forward Current Derating Curve

0

Ambient Temperature Ta (°C)

402060 10085

1000

100

Relative luminous intensity (%)

1.0

0.9

0.8

0.7

Luminous Intensity vs.

Forward Current

f

=

1

K

H

z

D

u

=

t

y

1

1

/

10

1

10

10

Forward Current I (mA)

Radiation Diagram

Ta=25°C

0

1

2

10

F

10°0°

0.20.10.5 0.3 0.4

Ta=25°C

20°

30°

40°

50°

60°

70°

80°
90°

0.6

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Typical Electro-Optical Characteristics Curves

R6

Spectrum Distribution

Ta=25°C

I (mA)

Forward Current

Relative luminous intensity (%)

18-225/B6R6C-C01/3T

Forward Current vs.
Forward Voltage

F

Ta=25°C

Wavelength λ (nm)

Luminous Intensity vs.

Ambient Temperature

)
%

(

Relative luminous intensity

Ambient Temperature Ta (°C)

Forward Current Derating Curve

I (mA)

F

Luminous Intensity vs.
Forward Current

)%
(

Relative luminous intensity

Radiation Diagram

Forward Voltage V (V)

F

Ta=25°C

Ta=25°C

Forward Current

Ambient Temperature Ta (°C)

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Label Explanation

18-225/B6R6C-C01/3T

CAT: Luminous Intensity Rank

Pb

HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank

Reel Dimensions

CPN :

N : XXXXXXXXXXXXX

P

XXXXXXXXXXXXX

QTY : XXX

LOT NO : XXXXXXXXXX

Reference : XXXXXXXX

EVERLIGHT

RoHS

CAT : XXX
HUE : XXX
REF : XXX

MADE IN TAIWAN

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

18-225/B6R6C-C01/3T

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

-

-

+

+

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

Moisture Resistant Packaging

Label

Aluminum moisture-proof bag

Desiccant Label

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.
Confidence level：90%

LTPD：10%

18-225/B6R6C-C01/3T

No. Items Test Condition

Test

Hours/Cycles

Temp. : 260℃±5℃

1 Reflow Soldering

Max. 10sec.

6 Min.

H : +100℃ 15min

2 Temperature Cycle

∫ 5 min

300 Cycles

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

300 Cycles

L : -10℃ 5min

4

High Temperature

Temp. : 100℃

1000 Hrs.

Storage

5

Low Temperature

Temp. : -40℃

1000 Hrs.

Storage

6 DC Operating Life IF = 20 mA

1000 Hrs.

Sample

Ac/Re

Size

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

22 PCS. 0/1

7

High Temperature /

85℃/ 85%RH

1000 Hrs.

22 PCS. 0/1

High Humidity

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

18-225/B6R6C-C01/3T

Precautions For Use

1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

Above255°C

30sec.Max.

3°C/sec.M ax.

Pre-heating
150~200°C

60~120sec.

Above 217°C
60~150sec.

260°C Max.

10sec. M ax.

6°C/sec.M ax.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo

18-225/B6R6C-C01/3T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.

5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: [phone]
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 11 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo