Everlast 16517918 Owner's Manual

OWNER’S MANUAL

MODEL NO. 16517918

 Assembly  Operation  Trouble –Shooting  Parts  Warranty

CAUTION:

You must read and understand this owner’s manual before operating unit. Keep this manual for future reference.

Serial number _____________________

Write the serial number in the space above for reference. Serial number can be found at the front bottom section of the elliptical.

Manufacture’s Limited Warranty

Dyaco Canada Inc. warrants all its home use elliptical parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt. Dyaco Canada Inc.’s responsibilities include providing new or remanufactured parts, at Dyaco Canada Inc.’s option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by Dyaco Canada Inc. directly to a consumer. The warranty period applies to the following components:

Home Use Limited WARRANTY F

rame Lifetime All Other Components 2 Years Labour 1 Year

This warranty is not transferable and is extended only to the original owner.

The warranty shall not apply to exercise units which are (1) used for commercial or other income producing purposes, or (2) subject to misuse, neglect, accident or unauthorized repair and alterations.

This warranty provided herein is lieu of all other express warranties, any implied warranties, including any implied warranties of merchantability of fitness for particular purpose, are limited in duration to the first 12 months from date of purchase. All other obligations or liabilities, including liability for consequential damages are hereby excluded.

REPAIR PARTS AND SERVICE

All of the parts for the elliptical shown in figure can be ordered from Dyaco Canada Inc. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2G 0B3. When ordering parts, the parts will be sent and billed at the current prices. Prices may be subject to change without notice. Check or money order must accompany all orders. Standard hardware items are available at your local hardware store.

To ensure prompt and correct handling of any errors, or to answer any questions, please call our Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax 1-905-353-8968 or email customerservice@dyaco.ca. You can visit us at www.dyaco.ca Office hours are from 8:30 AM to 5:00 P

M Monday to Friday Eastern Standard Time.

Always include the following information when ordering parts

 Model number  Name of each part  Part number of each part

TABLE OF CONTENTS

WARRANTY 1 MAINTENANCE 25-26 SAFETY PRECAUTIONS 2-3 PARTS LIST & DIAGRAM 27-31 IMPORTANT SAFETY INSTRUCTIONS 4-5 USER DIRECTION 32-33 ASSEMBLY PACK CHECKLIST 7-9 TRAINING GUIDELINE 34-36 ASSEMBLY INSTRUCTION 10-14 STRETCHING 37-38 COMPUTER INSTRUCTIONS 15-24

IMPORTANT SAFETY INFORMATION

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USING THIS ELLIPTICAL

Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product we produce, occasional errors and /or omissions do occur. In any event should you find this product to have either a defective or a missing part please contact us for a replacement. This product has been designed for home use only. Product liability and guarantee conditions will not be applicable to products being subjected to professional use or products being used in a gym center. This exercise equipment was designed and built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before assembly and operation of this machine. Also, please note the following safety precautions:

WARNING

It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. Read the OWNER’S OPERATING MANUAL and all warnings posted on the elliptical and follow it carefully before using your elliptical.. Review all warnings labels that affixed to the elliptical. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts are fully tightened before each use. Functional and

1. Functional and visual inspection of the equipment shall be made after assembling your elliptical.

2. Never operate the elliptical if it is not working properly, if it has been dropped, damaged, or exposed to water.

3. Set up and operate the elliptical on a solid level surface. Do not use outdoors or near water. Do not place the unit on a loose rug or uneven surface. It is recommended to use an equipment mat to prevent the unit from moving while it is being used, which could possibly scratch or damage the surface of your floor. It is recommended to have a minimum of 3 metres safe clearance on all sides of the elliptical while in use.

4. Keep the elliptical indoors, away from moisture and dust. Do not put the elliptical in a garage, covered patio or near water.

5. Do not operate the elliptical where aerosol products are used or where oxygen is being administered.

6. Do not insert any objects into any openings.

7. Inspect and properly tighten all parts of the elliptical regularly.

8. Keep children and pets away from this equipment at all times and while exercising.

9. Handicapped individuals should have medical approval and close supervision when using this elliptical.

10. Do not place hands or feet under the elliptical. Always keep hands and legs off of the elliptical when others are using it.

11. Always hold the handlebars when mounting, dismounting, or using the elliptical. Keep your back straight when using your elliptical, do not arch your back. When you stop exercising, allow the pedals to slowly come to a complete stop. The elliptical does not have a free wheel, the pedals will continue to move until the flywheel stops.

12. To disconnect, turn all controls to the off position, then remove plug from outlet.

13. Use the elliptical only for its intended use as described in this manual. Do not use any attachments that are not recommended by the manufacturer.

14. User weight should not exceed 400lbs (181 kgs).

15. Never allow more than one person on the elliptical at once.

16. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your heart rate to gradually increase and decrease and will help prevent straining muscles.

Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction with the level of exercise being performed. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

17. The pulse sensor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

18. Start your program slowly and very gradually increase your speed and distance.

19. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that could become entangled with the moving parts of your elliptical. Do not walk or jog barefoot, in stocking feet or loose fitting shoes or slippers.

20. Always hold on to a handlebar while making control changes

21. Use caution while participating in other activities while using your elliptical such as watching television, reading, etc. These distractions may cause you to lose balance, resulting in serious injury.

22. The decal shown below has been placed ons the elliptical. If the decal is missing or illegible, please call our Customer Service Department toll-free at 1-888-707-1880 to order a replacement decal. Apply the decal in the location shown.

WARNING: Before beginning any exercise program consult your physician. This is especially important for individuals over the age of 35 or persons with pre-existing health problems. Read all instructions before using any fitness equipment. We assume no responsibility from personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in

use, and before repairing or cleaning.

2. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it

has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

3. Do not carry this appliance by supply cord or use cord as a handle.

4. Keep the cord away from heated surfaces or flames.

5. Never operate the appliance with the air openings blocked. Keep the air openings free of lint,

hair, and things alike.

6. Connect this appliance to a properly grounded outlet only.

The use of an extension cord with this product is not recommended. If an extension cord is needed, use a short (less than 10 feet) heavy gauge (14 gauge or better) extension cord with a three prong (grounded) plug and receptacle

 NEVER remove any cover without first disconnecting AC power supply.

If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.

 NEVER expose this elliptical to rain or moisture. This product is NOT designed for

use outdoors, near a pool or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).

 NEVER use your elliptical during an electrical storm. Surges may occur in your

household power supply that could damage elliptical components.

Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and possibly others) to injury, and reduce the longevity of the equipment.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See diagram below for grounding methods.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

POWER CONNECTOR – FRONT, LEFT SIDE OF UNIT

HOW THE ELLIPTICAL WORKS

The elliptical allows your feet to move in a natural elliptical path, minimzing the impact on your knees

and ankles.

 Dual Action Handles for total body workout  Stationary handlebar for stability

Features

Incline Adjustment

The elliptical has an exciting electronic incline feature that will increase the variety of your workouts. When the incline is at its lowest position you get a traditional elliptical workout. As the incline increases you will feel your knees rise higher with each step, which changes the emphasis of the muscles being used. The power incline is controlled by keys on the console

and also automatically

during the built-in workout programs.

Console

Handlebar

Handpulse

Water bottle holder

Console Mast

Console Mast Cover

Pedal

Rear Stabilizer

Cushion Foot pad

Connecting Arm

Transportation Wheels

Pedal arm

Assembly Pack Checklist

Hardware Step 1(not shown at actual size)

#102. 5/16” × 2-1/4”

Hex Head Bolt (4 pcs)

#103. 3/8” × 3/4”

Hex Head Bolt (

pcs)

#104. 3/8” × 1-1/2”

Hex Head Bolt (

pcs)

#105. 3/8” × 2-1/4”

Hex Head Bolt (

pc)

#116. M5 × 10mm

Phillips Head Screw

(4 pcs)

#130. 3/8” × 7T

Nyloc Nut

(2 pcs)

#137. 3/8” × 19 × 1.5T

Flat Wa

sher (2

pcs)

#142. 5/16” × 20 × 1.5T

Flat Washer

(4 pcs)

#151. 5/16” × 1.5T

Split

asher

(4 pcs)

#152. 3/8” × 2T

Split

asher

(

1 pc)

#153. 3/8” × 23 × 2T

Curved

asher

(

2 pcs

)

#154. 5/16”

Star

asher

(

4 pcs

)

Hardware Step 2

Hardware Step 3

Hardware Step 4

5/16”

15mm

Hex Head Bolt (2 pcs)

150

17mm

Wave Washer (4 pcs)

141

5/16”

23 × 1.5T

Flat Washer (2 pcs)

#101.

5/16” × 1

1/4”

Hex Head Bolt (2 pcs)

#192.

5/16” × 9T

Nyloc Nut (2 pcs)

#142

5/16” × 20 × 1.5T

Flat Washer (2 pcs)

#127.

5/16” × 7T

Nyloc Nut (6 pcs)

#160.

5/16” × 23 × 1.5T

Curved Washer (4 pcs)

#161.

Switch Wire Cap

(2 pcs)

#159.

5/16” × 1

3/4”

Hex Head Bolt (6 pcs)

#115

M5 × 15mm

Phillips Head Screw

(14 pcs)

#119.

3.5 × 12mm

Sheet Metal Screw

(8 pcs)

#122.

M6 × 10mm

Phillips Head Screw

(4 pcs)

Assembly Tools

#157. Phillips

Head Screwdriver

#155. 13/14mm Wrench #158. 12/14mm Wrench

#102. 5/16” × 2-1/4” Hex Head Bolt (4 pcs) #103. 3/8” × 3/4” Hex Head Bolt (2 pcs) #104. 3/8” × 1-1/2” Hex Head Bolt (2 pcs) #105. 3/8” × 2-1/4” Hex Head Bolt (1 pc) #116. M5 × 10mm Phillips Head Screw (4 pcs) #130. 3/8” × 7T Nyloc Nut (2 pcs) #137. 3/8” × 19 × 1.5T Flat Washer (2 pcs) #142. 5/16” × 20 × 1.5T Flat Washer (4 pcs) #151. 5/16” × 1.5T Split Washer (4 pcs) #152. 3/8” × 2T Split Washer (1 pc) #153. 3/8” × 23 × 2T Curved Washer (2 pcs) #154. 5/16” Star Washer (4 pcs)

Assembly Instructions

Rear Rail, Console Mast & Console

1. Slide the Incline Rail Assembly (2) into the U channel of the Main Frame (1). Be very careful not to damage the wires that exit each part.

2. Connect the Incline Rail Assembly (2) horizontally to the U channel of the Main Frame (1) with two Hex Head Bolts (104), two Flat Washers (137) and two Nyloc Nuts (130). Secure it vertically with four Hex Head Bolts (102), four Split Washers (151), four Flat Washers (142) and four Star Washers (154). Tighten using the Wrenches provided (155 & 158).

3. Connect the Incline Motor wires (49 & 50) to the wiring harness that exits the Incline Rail Assembly (2), by matching the colors red, white and black. Push the excess cable inside the U channel. Guide the twist tie that is attached to the Computer Cable (44) through the bottom of the Console Mast (12) until it exits the top of the steel tube. Secure the Console Mast (12) by loosely threading two Hex Head Bolts (103) from the front and two Curved Washers (153) first. Then secure the mast from the side by loosely threading a Hex Head Bolt (105) and a Split Washer (152). Note: There is one bolt already

installed in the receiving bracket that will engage with the slot at the bottom of the Console Mast. Tighten the two bolts from the left side last.

4. Tighten the two front bolts first, then the side bolts with the Wrench (155).

5. Untie the twist tie from around the Computer Cable (44). Plug the Computer cable (44 - wide white end) & the two Hand Pulse Cables (47) into the bottom of the Console (43). Insert the Resistance Cable (165) into the white port labeled “Load” and the Incline Cable (166) into the Incline port on the back of the Console. Secure the Console (43) onto the mounting plate with four Phillips Head Screws (116). Tighten them with the Phillips Head Screw Driver (157).

6. Install the water bottle holder onto the handlebar in any position you like.

Hardware Step 1

Rear Rail, Console Mast & Console

+ 27 hidden pages

Everlast 16517918 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual