EverFocus EZ180 User Manual

E

E

Z

Z

8

8

0

0

W

HHiigghh RReessoolluuttiioonn BB//W

Weeaatthheerrpprrooooff CCaa

W

1

1

meerraa

m

User’s Manual

and

Operation Instructions

Notice

This manual is presented to the users of EZ180 by EverFocus Electronics
Corp. With years of engineering researches, EverFocus has spared no effort
to provide the high quality products to the worldwide users. For the policy
of continual product improvement, EverFocus reserves the right to make
changes to the product specifications and documentation without notice.
All the components of the products, including accessories, components, and
outlook, are based on the agreements of each deals to satisfy all kinds of
users. Meanwhile, please be advised that every step of operation must
follow the instruction of this manual to keep EZ180 working under the best
condition. Please notice that EverFocus will not be charged any claims or
renewing cases resulted from inappropriate operation.

Table of Contents

Safety Warning …………………………………………1

Introduction……………………………………………..2

Specification…………………………………………….3

Major Parts Names…..…………………………….…..4

Installation Instructions………………………….….…5

Settings………………………………………………….7

Safety Warning

1. Handle the camera with care.

Be careful when handling the camera, do not drop it or subject
it to strong shock or vibration to prevent any damages to it. Do
not disassemble it or place it on an unstable base.

2. Do not install the camera near electric or magnetic fields.

Installed the camera away from TV, radio transmitter, magnet,

electric motor, transformer, audio speakers because the
magnetic fields generate from above devices will distort the
video image.

3. Do not install the camera in the high temperature environment.

Installed the camera away from stoves, or other heat

generating devices as the high temperature could cause
deformation, discoloration or other damages of the camera.
Install the camera at where the temperature range will stay
between -35℃~+50℃ for 12VDC,-45℃~+50℃ for 24VAC.

4. Never face the camera toward the sun.

Never aim the camera at the sun or other extremely bright objects
whether it is in use or not.

5. Cleaning

Do not touch the surface of CCD sensor by hand directly. Use
a soft cloth to remove the dirt from the camera body. Use lens
tissue or a cotton tipped applicator and ethanol to clean the
CCD sensor and the camera lens. When the camera is not in
use, put the cover cap on the lens mount.

1