Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0℃ ~ 50℃ (32℉~122℉)and humidity between 20~80%.
The input power source is 12VDC/24VAC ; 100~240VAC or 12VDC only.
1.1 Main Features ............................................................................................................................................... 3
2. NAMES AND FUNCTIONS OF PARTS .........................................................................................5
2.1 Front panel.................................................................................................................................................... 5
2.3 Back panel and connections ........................................................................................................................... 6
5.5 WHITE BALANCE CONTROL....................................................................................................................... 19
- 1 -
5.6 DAY NIGHT................................................................................................................................................. 19
5.8 SPECIAL .................................................................................................................................................... 20
5.8.7 LANGUAGE ............................................................................................................................................. 23
6. HOW TO CONTROL AN EQ610 BY A KEYBOARD........................................................................................... 24
- 2 -
1. PRODUCT OVERVIEW
Amazing color low light sensitivity of .05 lux before the added benefits of digital signal processing
technology, delivered by a 1/3” Sony Super HAD II sensor, is just the beginning with the new EverFocus
EQ610. Color without compromise: 560TVL resolution, your choice of full motion color or true
day/night images in low light without ghosting, plus Digital Wide Dynamic Range to handle the most
challenging of bright or unbalanced scene lighting conditions. Combined with complete flexibility for
selection of lens field of view, electronic or DC iris, wide choices of housing styles and mounting
configurations, dual voltage operation and a full suite of OSD Menu and DSP functions controllable at
the camera or remotely via RS-485 from a keyboard and/or DVR (3D-DNR to save DVR HDD space,
privacy masking, 32X digital zoom, mirroring and rotation, 256X sens-up to a max of .0002 lux, and
much more) this is the camera you have been waiting for, and might be the only camera you’ll ever
need. Two models are available: Day/Night model and True Day/Night with ICR module. EQ610 offers 3
kinds of power sources to satisfy user’s different needs.
1.1 Main Features
Super HAD II sensor at .05 lux has 5X better native light sensitivitybefore DSP low light boost
Color without compromise: your choice of full motion color or true day/night images in low light
without ghosting
True Day/Night with ICR module (Optional)
Starlight super high sensitivity of 0.0002 Lux/F=1.2 is achieved through a sensitivity increase
setting of up to 256x
Digital Wide Dynamic Range expansion to deliver properly exposed images despite bright light
sources, deep shadows and/or unbalanced lighting in the same scene
Provides 3D-Noise Reduction to improve picture clarity while enabling DVRs to improve disk
storage utilization
Accepts C/CS mount manual or DC iris lenses
Easy to use OSD setup menu with local or RS-485 remote control (DVR or keyboard)
Motion detection for 4 configurable zones and local alarm output
Privacy mask function for 8 configurable zones
Provides digital zoom up to 32x
Dual voltage (12VDC/24VAC) or Universal power (100~240VAC) with line lock to AC supply
1.2 Package Contents
1. Camera unit
2. User’s manual
3. ND filter
4. Accessory pack containing
i. 5mm spacer C/CS Lens adapter
ii. ¼-20 UNC thread mounting bracket and (2) screws
iii. Allen key to for lens back focus set screw
iv. Lens control voltage connector
- 3 -
1.3 Specifications
Pickup Device 1/3" SONY Super HAD II CCD
Video Format NTSC or PAL
NTSC: 525 TV lines, 60 fields/sec;
Scanning System
Picture Elements 768 x 494(NTSC); 752 x 582(PAL)
Horizontal Resolution 560 TVL
Sensitivity 0.05Lux/F=1.2(AGC ON);0.0002Lux/F=1.2 (Sens-up 256x)
S/N Ratio Over 52dB (AGC off)
Electronic Shutter 1/50 (1/60) ~1/100,000
Video Output BNC 1.0V p-p 75Ω,
Gamma Correction 0.45
Lens Type
Back Light Compensation Off/BLC/HS BLC Selectable
Auto Gain Control Off/Low/Middle/High Selectable
White Balance ATW/AWB/AWC/Manual/Indoor/Outdoor Selectable
PAL: 625 TV lines, 50 fields/sec.
Manual or DC(DD) type
C/CS Mount (lens sold separately)
Sync. Mode Internal/Line lock
Day & Night Auto/Color/BW/EXT (Ext port for switch on command)
OSD menu Multiple functions; local or RS-485 remote control
3D-DNR Off/On switchable
Digital WDR Outdoor, Indoor
Digital Slow Shutter Sens-Up to 256X
Mirror Off/Mirror/V-Flip/Rotate Selectable
Digital Zoom Off/On selectable up to 32X
Motion Detection Off/On for 4 selectable zones
Privacy Mask Off/On for 8 selectable zones
Motion Alarm Output 1 output (3.3VDC)
RS-485 Control input for menu/configuration
Power Source 12VDC/24VAC ; 100~240VAC; 12VDC only
5W max.
Operating Temperature 0°C~50°C ; 32°F~122°F
Humidity 20% - 80% non condensing
Dimensions 68mm(W) x 56mm (H) x 120mm (L) ; 2.7 ”(W) x 2.2”(H) x 4.7”(L)
Weight 0.4 kg / 0.9 lbs
Certifications CE / FCC
- 4 -
2. NAMES AND FUNCTIONS OF PARTS
2.1 Front panel
The light sensor is for optional control of D/N switching levels in some applications. See section 5.6 for
details.
TAKE CARE NOT TO OBSTRCUT THIS OPENING
WITH THE BODY OF THE LENS!
Light Sensor
2.2 Top/Bottom Mounting
Using the two phillips head screws provided, the mounting bracket may be mounted to the top of
the camera body for suspending the camera; or, the brackets
camera body to support the camera.
may be mounted to the bottom of the
Top Bracket
Bottom Bracket
- 5 -
2.3 Back panel andconnections
○
○
12VDC only
2
○
○3
4
○
1
11
10
○
10
○
8
○
9
5
○
6
○
7
○
○
1
11
○
10
○
100~240VAC
2
○
○3
8
○
9
5
○
6
○
4
○
7
○
24VAC/12VDC
○
○
3
○2○
1
11
10
○
8
○
9
4
○
5
○
6
○
7
○
10
○
12
○
- 6 -
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.