EverFocus EQ600 User Manual
INSTRUCTION MANUAL
1/3” W-Dynamic High Resolution Color Camera
EQ600 WDII
Version 1.5.5
About this manual
Before installing and using this camera, please read this manual carefully.
Be sure to keep it handy for later reference.
Safety Warning
1.Read manual carefully before installing the unit.
Please read this manual first for correct installation and operation.
2.Never install the camera on a ceiling that cannot hold its weight
The product may fall down to cause damages.
3.Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio
speakers because the magnetic fields generated from above devices will distort the video image.
4.Always stop using when the product emits smoke or abnormal heat.
5.Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
6.Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
7.Keep the power cord away from wet and never touch the power cord with wet hands.
Touching the wet power cord with hands or touching the power cord with wet hands may result in
electric shock.
8.Never install the camera in areas exposed to water, oil or gas.
The water, oil or gas may result in failure, electric shock or file.
9.Cleaning-
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the
camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and
the camera lens.
10.Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera at temperatures within 0°C ~ 40°C and hu midity below 90%. The input power
source is DC12V/AC24V.
11.Retain Instructions--The safety and operating instructions should be retained for future reference.
12.Heed Warnings—
All warnings on the unit and in the operating instructions should be adhered to.
Safety Warning
13.Follow Instructions—
All operating and use instructions should be followed.
14.Cleaning—
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
15. Attachments—Do not use attachment not recommended by the product manufacturer as they
may cause hazards.
16. Water and Moisture—
Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area
which is classified as a wet location.
17.Servicing—
Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18.Power Cord Protection—
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, playing particular attention to cords and plugs, convenience
receptacles, and the point where they exit from the appliance.
19.Object and Liquid Entry—
Never push objects of any kind into this unit through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock, never spill liquid of any
kind on the unit.
Notice:The information in this manual was current when published. The manufacturer reserves the
right to revise and improve its products. All specifications are, therefore, subject to change without
notice.
1
Table of Contents
1. Product Overview……….………………..……………..………………………….…….…3
1.1 Main Features.…..…………..………………………………………………..…………3
1.2 Content List………………………………………………………………………………3
1.3 Specifications……………..……….……………………………………………………..4
2. Back Panel Connections………………………….………………………….…………….5
3. Operation………………………………………………………..………………..……..…6~7
3.1 Setup Buttons…...………………………………………………………………..……...6
3.2 Display/Close the user setup menu screen…..………………………………………7
4. Main Menu Flow……..…………..………..…………………………………………………8
5. Preset Mode……………..……………………………..…….……………………………9
5.1 Indoor Setup Menu Flow….…………………………………………………………..….9
5.2 Expert Setup………………………………………………………………………………10
6. Camera ID………………………………………………………..………………………12
6.1 Camera ID……………………………………………………………………………….13
6.2 ID Position……………………………………………………………………………….13
6.3 ID Color ………………………………………………………………………………….13
6.4 ID Background…………………………………………………………………………..13
7. Advanced Setup…………………………..…………..…….…………………………14~16
7.1 viewing…………………………………………………………………………….….14
7. 2 Save/restore……………………………………………………………………16
Appendix-A…Camera ID Character patterns………………………………………….……..17
Appendix-B…CCTV References………………………………………..…………………….. 18
2
Product Overview
1. Product Overview
By utilizing Digital Pixel System
improves the performance of surveillance camera in extreme lighting conditions. Where traditional
CCD cameras have difficulty processing images in strong backlighting, the EQ600WDII processes
each pixel independently, correcting for the variations and providing the best possible image unde r
the lighting conditions.
1.1Main Features
Color DPS ( Digital Pixel System) sensor
High resolution: Over 480 TV Lines/1.0lux and low speed shutter up to 32x
Day/Night function
OSD ( On Screen Display) function control
With programmable camera ID up to 12 characters
Compact stylish design for discrete observation
Image flip capability: Horizontal reverse
1.2Content List
Wide Dynamic Range High Resolution Color Camera unit
User’s manual
Mini Din male connector cable for S-Video / RS-232
TM
(DPS) sensor technology, the new EQ600WDII dramatically
3
A
A
A
A
A
Specifications
1.3
Pickup Device 1/3” Color DPS sensor
Specifications
Picture Element
720(H) × 540(V)
Horizontal Resolution >480 TV lines
Sensitivity 1.0 Lux/ F=1.2 (50IRE color)
Low Speed shutter Up to 32x(2,4,8,16,32)
S/N Ratio >48dB
uto exposure: YES
uto White Balance Yes, 2500K ~9500K
Back light compensation YES
uto IRIS YES
Video Outputs 1.0Vp-p composite S-Video(Y/C output)
uto Gain Control Yes
Day/Night function ON/OFF
Dynamic range 95dB typical, 120dB max
Synchronization Internal or Line Lock (AC input required)
Image Flip Yes, Horizontal reverse
Video Output: 1 Vp-p / 75 ohm composite, S-Video (Y/C output)
Imaging System NTSC/ PAL
On Screen Display Yes
Power Source
C24V / DC12V
Operating Temperature
0°C ~ 40°C
Power Consumption 7W max.
Dimensions (mm) 56 (W) x 68 (H) x101 (D)
Lens mount C/CS mount, DD Drive
4
(7)
Back Panel Connections
2. Back panel connections
(1)
(4)
(8)
(6)
(2)
(9)
(1)S-Video / RS-232 port:
Connect Mini Din Male Connector to S-Video / RS-232 port for better video output quality or
communication. Please refer to the pin assignment of the S-Video/ RS-232 port as below:
Please refer to Appendix C for detail RS232 Communication.
(2)AC24V/DC12V Compatible Input Terminal:
This power terminal is for connecting the AC24V/DC12V power supply cord
(3)Video Output Connector:
GND
5V
C
RX
TX
Y GND
Y
C GND
Connect the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial
cable with BNC female connector at backside of the camera.
(4) Tact switcher for left cursor
(5) Tact switcher for down cursor
(6) Tact switcher for right cursor
(7) Tact switcher for up cursor
(8) Tact switcher for on-screen setting menu
(9) Auto Iris Lens Connector
This connector is used to connect with the auto iris lens by a 4 pin male connector
Pin 1 Pin 2 Pin 3 Pin 4
Direct Drive Cnt- Cnt+ Drv+ Drv-
3
1
4
2
5
Loading...