EverFocus EQ350, Eq250 User Manual

EVERFOCUS

1/3” Sony CCD Aluminum Box Housing

Color Camera

Operation Instructions

Model No. EQ350/EQ250

Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or
power source ratings.

Use the camera at temperatures within -10°C~50°C (14°F~122°F) and humidity between
20%~ 80%. The input power source are 12VDC/24VAC; 100~240VAC.

PREFACE

The EQ series is a solid-state color video camera specially designed for high quality surveillance
applications. It incorporates break through DSP technology that provides most reliable and
accurate color picture in security industry. The camera is compatible with C-mount or CS-mount
lenses and come with an easy back-focus adjustment for user-friendly installation.

FEATURES

 Industry leading super high-res. with 560 TVL (EQ350 model), 380TVL(EQ250)
 Revolutionary integrated 10-bit Digital Signal Processor (DSP) delivers sharp color images

and excellent picture quality

 Wide range automatic electronic shutter: 1/60 (1/50) ~ 1/100,000
 Auto line lock with external phase adjustment
 C/mount or CS-mount adjustable with easy back-focus adjustment wheel on the camera
 Smart FL mode for fluorescent light or 1/100 sec (NTSC)
 Utilizing innovative Pure Vision Technology

ST ANDARD ACCESSORIES

¾ Camera Unit x 1
¾ Accessory Pack includes

 Mounting Base for bracket
 M2 Screws x 4 for fixing mounting base
 Lens Plug Connector

¾ Manual x 1

1

SPECIFICATIONS

Type EQ350 EQ250
Pickup Device 1/3'' SONY Super HAD CCD

NTSC: 768(H) x 494(V)

NTSC: 510(H) x 492(V)

Picture Elements

PAL: 752(H) x 582(V)

PAL: 500(H) x 582(V)

Video Format NTSC or PAL

NTSC: 525 TV lines, 60 fields/sec

Scanning System

PAL: 625 TV lines, 50 fields/sec
Horizontal Resolution 560TVL 380TVL
Sensitivity 0.5Lux/F=1.2 0.3Lux/F=1.2
S/N Ratio Over 48dB(AGC off)
Electronic Shutter 1/50(1/60)~1/100,000

C/CS mount
Lens Type

Video Drive / Direct Drive
Back Light Comp. ON/OFF Switch
Auto Gain Control ON/OFF Switch
Fluorescent Light ON/OFF Switch
Auto White Balance Yes
Gamma Correction 0.45
Video Output BNC 1.0Vp-p , 75ohm
Sync. Mode Line Lock/Internal Sync

2 types:
Power Source

100VAC~240VAC

12VDC/24VAC

100VAC~240VAC 12W max
Power Consumption

24VAC 7W max

12VDC 4.5W max

57(W) X 51(H) X 140.2(D) mm;
Dimensions

2.25"(W) X 2"(H) X 5.52"(D)
Weight 0.5kg ; 1.1lbs
Operating Temperature -10°C~50°C ; 14°F~122°F (20%~80% Humidity)
Certification FCC,CE

2

DIMENSIONS

3