EverFocus EHD Series, 350HQ User's Manual & Operating Instructions

E

HD

Series

11//33”” CCoolloorr RRuuggggeedd DDoommee CCaammeerraa

User’s Manual

and

Operation Instructions

Notice

This manual is presented to the users of EHD series by EverFocus
Electronics Corp. With years of engineering researches, EverFocus has
spared no effort to provide the high quality products to the worldwide users.
For the policy of continual product improvement, EverFocus reserves the
right to make changes to the product specifications and documentation
without notice. All the components of the products, including accessories,
components, and outlook, are based on the agreements of each deals to
satisfy all kinds of users. Meanwhile, please be advised that every step of
operation must follow the instruction of this manual to keep EHD series
working under the best condition. Please notice that EverFocus will not be

charged any claims or renewing cases resulted from inappropriate operation.

Table of Contents

Safety Warning ……………………………………. 1

Introduction………………………………………... 2

Specification……………………………………….. 3

Installation Instructions……………………………4

Dip Switch Functions……………………………… 8

Simple Instructions for the desiccant pack……… 11

Safety Warning

1. Do not install the camera near electric or magnetic fields.

Installed the camera away from TV, radio transmitter, magnet,

electric motor, transformer, audio speakers because the
magnetic fields generate from above devices will distort the
video image.

2. Do not install the camera in the high temperature environment.

Installed the camera away from stoves, or other heat

generating devices as the high temperature could cause
deformation, discoloration or other damages of the camera.
Install the camera at where the temperature range will stay
between -40℃ to 50℃.

3. Never face the camera toward the sun.

Never aim the camera at the sun or other extremely bright objects
whether it is in use or not.

4. Cleaning

Do not touch the surface of CCD sensor by hand directly. Use
a soft cloth to remove the dirt from the camera body. Use lens
tissue or a cotton tipped applicator and ethanol to clean the
CCD sensor and the camera lens. When the camera is not in
use, put the cover cap on the lens mount.

5. Heater

Heater elements could be very hot!! Heaters are located inside
the camera housing and will active automatically while the
environment temperature is below 10℃. Do not touch the
heater element while it’s active.

1

Introduction

The most technically advanced EHD series are the newest
vandal-resistant Color Rugged Dome Camera from EverFocus Electronics.
The Color Rugged Dome Camera can withstand a blow from a 10-pound
sledgehammer and has a built-in heater that allows for operation in low
temperatures. It is perfect for all high-profile crime-prone applications such
as building entrances, retail stores, and shopping malls. The extremely EHD
series are unquestionably one of the world's toughest cameras and is your
best choice for vandal resistance.

Main Features :

??Excellent high resolution 520TVL
??Revolutionary integrated 10-bit Digital Signal Processor ( DSP)

delivers excellent picture quality and performance.

??Low light sensitivity of 0.5lux/F=1.2 is achieved by using the

advanced 1/3” interline transfer color CCD.

??The electronic shutter and AGC allow the camera to be used in

environment with varying light levels.

??DC12V or AC24V switches automatically po wer supply; Line Lock

for AC24V.

??S/N Ratio reaches 48 dB or more.
??Vari-focal lens available.
??Compact size: 130(W)mm x 98.9(H)mm x 130(D)mm
??Polycarbonate shell withstand the impact of 10 pounds

sledgehammer, smoke color or clear as option.

??Aluminum die-casting base, smoke color or clear as option
??Unique security screw locked
??Operating temperature –40 ~ 50℃.
??Heater triggered when temperature less than 10℃.

2