EverFocus EFD300 User Manual

EVERFOCUS

1/3” 520TVL Color Flush Dome Camera

Operation Instructions

Model No. EFD300

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or
power source ratings.

Use the camera at temperatures within 0℃~ 50℃/32℉~122℉ and humidity between 20%~
80%. The input power source is 12VDC/24VAC.

PREFACE

EFD300 High Resolution Flush Dome Camera Series are compact, full functioned CCD

Color Cameras. The flush dome camera is designed with advanced digital processing

circuitry for high resolution 1/3" color interline transfer CCD sensor, it has DIP switch for FL

ON/OFF, Mirror ON/OFF, AGC ON/OFF and D/N ON/OFF. The dome camera uses a

vari-focal auto iris lens for discreet surveillance or close-up viewing and it features with iris

level volume control for the best viewing quality.

FEATURES

z 1/3” SONY Super HAD color CCD pick up device for more than 520 TV lines of

horizontal resolution

z The high sensitivity of 0.4Lux/F=1.2 is achieved by using 1/3” SONY Super HAD

interline transfer color CCD

z The Electronic Shutter and AGC functions allow the camera to be used in environment

with varying light levels

z Built-in Vari-Focal lens
z With manual PAN/TILT mechanism
z FL, Back Light Comp., AGC ON/OFF switchable
z Compact size: 135 mm O.D. x 112 mm H/5.4” O.D. x 4.4” H
z System available for NTSC or PAL

1

SPECIFICATIONS

Pickup Device

Video Format

Scanning System

Picture Elements

Horizontal Resolution

Sensitivity

S/N Ratio

Electronic Shutter 1/50(1/60)~1/100,000

Lens Type

Auto Gain Control

Flickerless

Back Light Comp.

Auto White Balance

1/3'' SONY Super HAD CCD

NTSC or PAL

NTSC: 525 TV lines, 60 fields/sec

PAL: 625 TV lines, 50 fields/sec.

768x494(NTSC) ; 752x582(PAL)

520TVL

0.1Lux/F=1.2

Over 48dB (AGC off)

Vari-focal lens, Auto Iris

f=4~9mm

ON/OFF Switch

ON/OFF Switch

ON/OFF Switch

Yes

Gamma Correction

Video Output

Sync. Mode

Vandal Proof

Power Source

Power Consumption

Dimensions

Weight

Operating Temperature

Certifications

ST ANDARD ACCESSORIES

0.45

2 video outputs

BNC 1.0Vp-p, 75ohm

Additional testing video output 1.0Vp-p, 75ohm

Internal sync

Yes

12VDC/24VAC

12VDC: 2W max.

24VAC: 1.5W max.

135mm(O.D.) x 112mm(H);

5.4"(O.D.) x 4.4"(H)

0.7kg ; 1.6lbs

0°C~50°C ; 32°F~122°F (20%~80% Humidity)

FCC/CE

¾ Camera Unit
¾ Operation Instructions (this document)
¾ Drill Template

2